Please let me know if you have one or two.
Please let me know if you have one or two.
One of our members used a V6 SBEC II socketed with L4 calibration.
Regards,
Miles
DD '87 Sundance T1, SLH with rear disks
'87 CSX #432 2.5 CB TII, SLH
Here is the reference I am referring to
https://www.turbododge.com/forums/f4...her-stuff.html
Regards,
Miles
DD '87 Sundance T1, SLH with rear disks
'87 CSX #432 2.5 CB TII, SLH
Yeah, that's what I was referencing. I have four SBECIIs that were pulls from 3.3/3.8 minivans. I socketed them all. None of them will run on my bin that I dumped from my original computer. I also have two TBI SBEC that runs fine with the same ROM chip.
The weather sucks or I would be playing with it now.
Anyway, I am still looking for a good known '92 Turbo SBECII.
I am very interesting in this topic so I am curious if you seen any codes or unusual behaviour.
I read again the various messages on the topic and both the L4 code and V6 SBECII are of the same year. So the original author used SBECII code on an SBECII.
Last edited by chromguy; 12-09-2018 at 11:31 PM.
Regards,
Miles
DD '87 Sundance T1, SLH with rear disks
'87 CSX #432 2.5 CB TII, SLH
You can do it with a FFV sbec2 also from acclaim and spirits
Are all TBI SBECs SBECI or did they make an SBECII in a TBI application?
I have a 92 2.5T1 sbec 2. Looking for 200$ for it. Really don't need to sell it