Results 1 to 4 of 4

Thread: turbo suggestions

  1. #1
    Supporting Member Turbo Mopar Contributor "Top Fuel" Bender's Avatar
    Join Date
    Mar 2006
    Location
    Hellertown,Pa
    Posts
    1,961

    turbo suggestions

    posted this on the Dodge Cummins forum with no response
    hoping for better luck over here

    It's got WH1C turbo that ate the thrust bearing but hasn't hit the housing yet.

    1995 12V 3500 4x4 5spd dually 9300lbs
    Daily work truck. Sometimes I tow 6-10k. With the 235/85r16 I barley go over 65mph.
    From what I can see it's stock pump and injectors. Has #8 fuel plate, 16° timing and boost elbow (spikes 25+ holds 20) no cat, 4" MBR cat back.


    What are my best options without breaking the bank. Will the HX35W bolt right up ? Heard the aftermarket ones might have a 16cm housing instead of the 12cm and I'll loose some low end ???


    I have a H1C off my 1st gen . Is that the same center section as my WH1C ? I saw Holset listed the WH1C as an upgraded turbo for the 1tons

    Or is there a better option without spending $1k+
    10's AGAIN '07, '08, '09
    TFB Fabrications custom billet machined parts for you Turbo Mopar

  2. #2
    turbo addict
    Join Date
    Aug 2009
    Location
    Myrtle Beach, SC
    Posts
    2,133

    Re: turbo suggestions

    Seems like the wh1c and hx35w are basically the same turbo spec wise. Not sure if it'll bolt right on though.

  3. #3
    Supporting Member II Turbo Mopar Contributor Shadow's Avatar
    Join Date
    Dec 2006
    Location
    Aubigny, Manitoba, Canada
    Posts
    5,088

    Re: turbo suggestions

    I would go straight to the HE351. Fastest spool and best power turbo of all the factory units. Not sure what you mat have to do for install, but it bolts up on the first gens pretty easily.

    Robert Mclellan
    http://www.youtube.com/watch?v=wambNdfnu5M
    10.04 @ 143.28mph (144.82 highest mph)
    Worlds fastest 8v MTX Shelby Charger
    Manitoba's Fastest 4cyl!
    8 valve, No Nitrous!
    New clutch combo is the SH!T!

  4. #4
    turbo addict Turbo Mopar Contributor
    Join Date
    Dec 2005
    Location
    Seattle
    Posts
    7,063

    Re: turbo suggestions

    plus AFC live.

    Grumpy I don't dare mod my auto
    Brent GREAT DEPRESSION RACING 1992 Duster 3.0T The Junkyard - MS II, OEM 10:1 -[I] Old - 11.5@125 22psi $90 [U]Stock[/U] 3.0 Junk Motor - 1 bar MAP [/I] 1994 Spirit 3.0T - 11.5@120 20 psi - Daily :eyebrows: Holset He351 -FT600 - 393whp 457ft/lb @18psi 1994 Spirit 3.0T a670 - He341, stock fuel, BEGI. Wife's into kid's project. 1990 Lebaron Coupe 2.2 TI/II non IC, a413 1990 Spirit 3.0 E.S. 41TE -- 1993 Spirit 3.0 E.S. 41TE -- 1994 Duster 3.0 A543 1981 Starlet KP61 Potential driver -- 1981 Starlet KP61 Parts -- 1983 Starlet KP61 Drag 2005 Durango Hemi Limited -- 1998 Dodge 12v 47re. AFC mods, No plate, Mack plug, Boost elbow -- 2011 Dodge 6.7 G56

Similar Threads

  1. Suggestions? Tight squeeze turbo oil fitting help
    By wheming in forum Turbos & Intercoolers!
    Replies: 18
    Last Post: 03-26-2017, 04:19 PM
  2. 1993 jeep wrangler turbo! Need suggestions
    By 1984rampage in forum Other vehicles
    Replies: 14
    Last Post: 05-08-2009, 06:08 PM
  3. Need suggestions...
    By Bubba in forum Electrical & Fuel System
    Replies: 0
    Last Post: 05-19-2008, 07:44 AM
  4. Rod suggestions
    By iniviate in forum 16v Factory Engines
    Replies: 10
    Last Post: 07-20-2006, 06:11 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •