Results 1 to 5 of 5

Thread: How do I convert a factory SMEC Bin file to work with MPTune?

  1. #1
    Mitsu booster
    Join Date
    Jan 2015
    Location
    Missouri
    Posts
    31

    How do I convert a factory SMEC Bin file to work with MPTune?

    I am wanting to work with factory V6 and V8 SMEC Bin files in MPTune.
    Is there a program that does this?
    Looking for some guidance.
    Thanks

  2. #2
    Supporting Member II Turbo Mopar Contributor
    Join Date
    Jun 2006
    Location
    Spearfish SD
    Posts
    1,941

    Re: How do I convert a factory SMEC Bin file to work with MPTune?

    depends on the v6 and v8 cals. i've converted a couple stock cals to the mptune format. what particular smec bins do you have?
    89 Voyager LE, 2.5T2 - rest in peace
    87 Charger Shelby T2 (2.4 conversion in process)

  3. #3
    Mitsu booster
    Join Date
    Jan 2015
    Location
    Missouri
    Posts
    31

    Re: How do I convert a factory SMEC Bin file to work with MPTune?

    The Bins I have are from factory smec V6 and V8 dakota's. I pulled them directly from the computers I have. So they have not been made MPTune ready. Right now I am interested the 5.2 V8. I have several that are all different. I have two 5.2L ones a 3 speed and other 4 speed automatics. I also have both Shelby Dakota, stock and performance. Ultimately I would like to be able work with them in MPTune. I have socketed a 5.2L that was a 3 speed with the Shelby preformance cal. Everything worked except the tach. Would like to get the tach working. The Shelby computer controlled the electric fans. When a factory 5.2L computer is installed in a Shelby Dakota the fans run all the time. I also have a 89 SMEC V6 Dakota that I would not mind messing with. I understand that this is another project for someone to take on. That's why I would like to try to do it. If I can't get it done then I would be up to paying someone.

  4. #4
    Supporting Member II Turbo Mopar Contributor
    Join Date
    Jun 2006
    Location
    Spearfish SD
    Posts
    1,941

    Re: How do I convert a factory SMEC Bin file to work with MPTune?

    i've disassembled a few of the v8 cals a few years ago and set them up for mptune. which cal would be your preference to get done?

    there are a few cals here that i've set up http://www.turbo-mopar.com/forums/showthread.php?81532-MPTune-non-Turbonator-cals&highlight=
    89 Voyager LE, 2.5T2 - rest in peace
    87 Charger Shelby T2 (2.4 conversion in process)

  5. #5
    Mitsu booster
    Join Date
    Jan 2015
    Location
    Missouri
    Posts
    31

    Re: How do I convert a factory SMEC Bin file to work with MPTune?

    Ether of the Shelby Dakota Bin's. I just downloaded the stock from my computer. The performance I got from Rob L.

Similar Threads

  1. MPTune not loading .BIN file...
    By LeBaronMike in forum EFI Tuning
    Replies: 7
    Last Post: 07-16-2017, 01:10 AM
  2. should I convert LM to SMEC ? (87 Shelby Charger)
    By Dr. Johny Dodge in forum Electrical & Fuel System
    Replies: 14
    Last Post: 11-16-2016, 09:48 PM
  3. how to convert L body to smec !!!
    By shelbymonster in forum Electrical & Fuel System
    Replies: 13
    Last Post: 05-03-2009, 04:38 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •