Results 1 to 6 of 6

Thread: Need help with some EV1 connectors

Threaded View

  1. #1
    turbo addict
    Join Date
    Dec 2006
    Location
    MPLS, MN
    Posts
    3,589

    Need help with some EV1 connectors

    I'm looking for some help determining "IF" the connector in the middle picture used any sort of wire lock to lock the connector in place? I vaguely seem to remember it did. This connector came off a 93 FFV 2.5. The vehicle is long gone, but I'm using the near perfect harness to replace a harness in a 1990 SBEC (sequential) 2.5 turbo. After removing all the unused wires (4 way o2 connector) and grafting on the 1990 6 way injector harness connector, it fits like it was born there.
    For reference, I'm also showing pics. of earlier EV1 connectors from 84-89 with wire lock and rubber boot & later model connector from later 90's 3.0. 3.0 connector positively locked onto injector using plastic squeeze connector. I believe all three would be considered EV1 connectors, but the one I'm using snaps onto the injector, but it will pull off after tugging on it a little bit. I also saw some EV1 connectors on Chrysler 2.5 V6 Mitsubishi engines at salvage yard (not pictured) that didn't use any type of positive lock. They could be removed but you had to tug on them pretty hard.
    So if they do have some sort of lock, and someone has some they're willing to sell, I'm interested. PM me if you have what I'm looking for.
    Thanks in advance for the advice.
    Todd
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	IMG_9353.JPG 
Views:	120 
Size:	48.9 KB 
ID:	63193   Click image for larger version. 

Name:	IMG_9351.JPG 
Views:	131 
Size:	55.3 KB 
ID:	63194   Click image for larger version. 

Name:	IMG_9352.JPG 
Views:	130 
Size:	49.8 KB 
ID:	63195  

Similar Threads

  1. Connectors
    By 135sohc in forum Electrical & Fuel System
    Replies: 269
    Last Post: 08-24-2023, 10:13 PM
  2. Electronics connectors/pigtails
    By iangoround in forum Parts Wanted
    Replies: 6
    Last Post: 08-14-2010, 10:43 PM
  3. TPS and AIS connectors?
    By trbowgn in forum Electrical & Fuel System
    Replies: 4
    Last Post: 08-12-2010, 01:42 PM
  4. Missing connectors
    By jory in forum Electrical & Fuel System
    Replies: 8
    Last Post: 07-15-2009, 02:46 AM
  5. Electronics WTB: 88/89 SMEC 60 and 10 pin connectors
    By risen in forum Parts Wanted
    Replies: 17
    Last Post: 07-01-2008, 09:07 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •