Looking for a TU competition flywheel. If you have one shoot me a PM.
Thanks
Looking for a TU competition flywheel. If you have one shoot me a PM.
Thanks
Robert Mclellan
http://www.youtube.com/watch?v=wambNdfnu5M
10.04 @ 143.28mph (144.82 highest mph)
Worlds fastest 8v MTX Shelby Charger
Manitoba's Fastest 4cyl!
8 valve, No Nitrous!
New clutch combo is the SH!T!
As in Aluminum? If so, I do have one that I would be willing to sell
No not Al. It's the 12 lb cast version.
Robert Mclellan
http://www.youtube.com/watch?v=wambNdfnu5M
10.04 @ 143.28mph (144.82 highest mph)
Worlds fastest 8v MTX Shelby Charger
Manitoba's Fastest 4cyl!
8 valve, No Nitrous!
New clutch combo is the SH!T!
I believe that pic is TU's new version that (I think) Chris first posted up sometime last year
-as opposed to the ones with all the holes drilled in them
I think the same thread said there may or may not be a ballance issue with SOME of the early ones but the new style was being double checked
I believe the new ones are also new-new as opposed to reworked old flywheels
above info may or may not be correct - but usually my bear trap memory serves pretty well
um, if this is for the charger I might consider a new in the box one just to be sure it remains a flywheel and not pieces of a flying saw blade
OCD says magnaflux it
personally our aluminum case transmissions scare the crap out of me when I think of the mechanic at the dealer I used to go to
- his diff pin , or a piece of it went through the bellhousing and rad
I said to him good thing it didn't go the other way
in one of my recient posts I mentioned I've saved a nice big piece of 16x16 3/16 steel plate for the floor under my peddels ...
Was actually back in 2015 that I first saw that pic posted.
Not for the Charger. Charger already has a flywheel that will most likely remain for the life of the car. If it ever does get changed up it would only be to go twin disc
This is for another build and I was hoping to find one new if possible. Thought maybe someone had bought one and it's been sitting cuz plans changed ect ect.
TU has none in stock and timeline for any getting made is indefinite. If not for that there would be one on the way as we speak.![]()
Robert Mclellan
http://www.youtube.com/watch?v=wambNdfnu5M
10.04 @ 143.28mph (144.82 highest mph)
Worlds fastest 8v MTX Shelby Charger
Manitoba's Fastest 4cyl!
8 valve, No Nitrous!
New clutch combo is the SH!T!
2015?
wow if time's going that fast I must be getting old ...
Tell me about it!
I believe it will be 6 years this fall since the Charger has run at a track..........
Robert Mclellan
http://www.youtube.com/watch?v=wambNdfnu5M
10.04 @ 143.28mph (144.82 highest mph)
Worlds fastest 8v MTX Shelby Charger
Manitoba's Fastest 4cyl!
8 valve, No Nitrous!
New clutch combo is the SH!T!
I have a STEEL flywheel I bought years ago for a long forgotten project, it's TIII but I can't see how that would affect it's use in a non-TIII motor? Anyway, it's lighter than stock but I'd have to weigh it to get you an actual number. It's sexy FoSHoIt was also expensive, $550+shipping(not sure about the cost going north of the border) Any interest at those kind of numbers Rob? Not gonna dig it out if its a non starter for you...
AJ (no More Alan) 84 Rampage RT TIII/568 Quaife 87 GLHS dealer optioned Red 16V Masi/568/Quaife
90 Masi 16V White/Ginger/Black
89 TC Masi 16V Red/Ginger/Black
86 GLHS #110 RoadRace Built 89 CSX-VNT Recaro Car
89 Turbo Mini 'Woody' 85 GLHT 'RedBox'
2014 Explorer DD'r 3.5Twin Turbo Ecoboost AWD and 500HP
My profile page has over 20,000 views, I'm somebody LOL
Thanks AJ, but was hoping to stick around 300USD range. (not even sure what the Comp flywheels sold for?) Unfortunately with the CND $ @ .75 cents even 300US = 400.00CND Without shipping lol
So $800.00 CND is def beyond the scope of this build. For that amount I would mod the trans and slap in a complete ACT set-up like the Charger with 11lb flywheel.
- - - Updated - - -
Thanks anyway!![]()
Robert Mclellan
http://www.youtube.com/watch?v=wambNdfnu5M
10.04 @ 143.28mph (144.82 highest mph)
Worlds fastest 8v MTX Shelby Charger
Manitoba's Fastest 4cyl!
8 valve, No Nitrous!
New clutch combo is the SH!T!