Results 1 to 15 of 15

Thread: 88-89 turbo harness (non-minivan)

  1. #1
    Boost, it's what's for dinner... Turbo Mopar Staff Aries_Turbo's Avatar
    Join Date
    Dec 2005
    Location
    Warsaw, NY
    Posts
    8,183

    88-89 turbo harness (non-minivan)

    looking for 88-89 turbo engine harness from a daytona, lebaron, shadow, newyorker etc. not from a minivan. (already have a 89 minivan turbo engine harness)

    preferably around 100$

    thanks

    Brian

    Quote Originally Posted by turbovanman
    This one is easy, I have myself to blame, I rush things, don't pay attention to gauges when I should, change to much stuff at once then expect miracles, the list is endless.

  2. #2
    Garrett booster
    Join Date
    May 2009
    Location
    Pittsburgh PA
    Posts
    96

    Re: 88-89 turbo harness (non-minivan)

    I think I have a 89 turbo shadow / manual trans harness. Bumper to bumper. Iíll see if I can dig it out.

  3. #3
    Hybrid booster
    Join Date
    Mar 2014
    Location
    Toronto Canada
    Posts
    935

    Re: 88-89 turbo harness (non-minivan)

    have you seen an 88 K car smec harness?

    it still used the bulkhead connector at the firewall - NOT the rubber gromit like the other 88's started doing

    and fyi - IF you swap to the rubber gromit in the firewall the round hole you need to make is the same diameter as the square hole - IF you measure the square hole diagonally corner to corner

    so essentually you need ro remove a D shaped piece on each side of the square 50 way bulkhead connector hole

  4. #4
    Boost, it's what's for dinner... Turbo Mopar Staff Aries_Turbo's Avatar
    Join Date
    Dec 2005
    Location
    Warsaw, NY
    Posts
    8,183

    Re: 88-89 turbo harness (non-minivan)

    Quote Originally Posted by Dr. Johny Dodge View Post
    have you seen an 88 K car smec harness?

    it still used the bulkhead connector at the firewall - NOT the rubber gromit like the other 88's started doing

    and fyi - IF you swap to the rubber gromit in the firewall the round hole you need to make is the same diameter as the square hole - IF you measure the square hole diagonally corner to corner

    so essentually you need ro remove a D shaped piece on each side of the square 50 way bulkhead connector hole
    yeah i have seen those.... they are hard to find nowadays. id love to find one of those.

    naah im not changing underdash connectors.

    Brian

    Quote Originally Posted by turbovanman
    This one is easy, I have myself to blame, I rush things, don't pay attention to gauges when I should, change to much stuff at once then expect miracles, the list is endless.

  5. #5
    Hybrid booster
    Join Date
    Dec 2005
    Location
    cedar rapids Iowa
    Posts
    983

    Re: 88-89 turbo harness (non-minivan)

    I can get u one from a stock 88 lebaron T1 auto, complete harness.

  6. #6
    boostaholic
    Join Date
    Oct 2008
    Location
    Palmerton PA
    Posts
    1,231

    Re: 88-89 turbo harness (non-minivan)

    I have a 88 turbo z I'm going to be parting out. I want to sell the engine first as I would like to show the possible buyer that the engine runs. If you don't need it ASAP I could probably help you out.


    Sent from my XT1254 using Tapatalk

  7. #7
    Boost, it's what's for dinner... Turbo Mopar Staff Aries_Turbo's Avatar
    Join Date
    Dec 2005
    Location
    Warsaw, NY
    Posts
    8,183

    Re: 88-89 turbo harness (non-minivan)

    Quote Originally Posted by glht_omni View Post
    I can get u one from a stock 88 lebaron T1 auto, complete harness.

    Quote Originally Posted by lengel View Post
    I have a 88 turbo z I'm going to be parting out. I want to sell the engine first as I would like to show the possible buyer that the engine runs. If you don't need it ASAP I could probably help you out.


    Sent from my XT1254 using Tapatalk
    i wanna try my LM to SMEC conversion first. so no rush. each of you, lemme know how much for each harness shipped to 14569. PM is fine. thanks.

    honestly, i like the idea of keeping the SMEC logic board in the passenger compartment even if the battery temp sensor isnt seeing the correct temp. for using an ostrich and preventing the SMEC logic board socket area from being exposed to water, the passenger compartment is great. i may use some wire to extend the battery temp thermistor from the board to near the battery for accuracy..

    Brian

    Quote Originally Posted by turbovanman
    This one is easy, I have myself to blame, I rush things, don't pay attention to gauges when I should, change to much stuff at once then expect miracles, the list is endless.

  8. #8
    Hybrid booster
    Join Date
    Dec 2005
    Location
    cedar rapids Iowa
    Posts
    983

    Re: 88-89 turbo harness (non-minivan)

    I can get n sell u the complete lebaron onw for $125 shipped including all the solenoids n relays n sensors that are connected to firewall n strut tower/fender walls. Even include the fuel injector clips.

  9. #9
    Boost, it's what's for dinner... Turbo Mopar Staff Aries_Turbo's Avatar
    Join Date
    Dec 2005
    Location
    Warsaw, NY
    Posts
    8,183

    Re: 88-89 turbo harness (non-minivan)

    Quote Originally Posted by glht_omni View Post
    I can get n sell u the complete lebaron onw for $125 shipped including all the solenoids n relays n sensors that are connected to firewall n strut tower/fender walls. Even include the fuel injector clips.
    88 k based lebaron SMEC unicorn harness? or j or h body lebaron?

    i guess i didnt realize what you might have been posting earlier lol. reading comprehension FTL.

    Brian

    Quote Originally Posted by turbovanman
    This one is easy, I have myself to blame, I rush things, don't pay attention to gauges when I should, change to much stuff at once then expect miracles, the list is endless.

  10. #10
    Hybrid booster
    Join Date
    Dec 2005
    Location
    cedar rapids Iowa
    Posts
    983

    Re: 88-89 turbo harness (non-minivan)

    Quote Originally Posted by Aries_Turbo View Post
    88 k based lebaron SMEC unicorn harness? or j or h body lebaron?

    i guess i didnt realize what you might have been posting earlier lol. reading comprehension FTL.

    Brian
    It's a 2dr very body with T1 auto

  11. #11
    Boost, it's what's for dinner... Turbo Mopar Staff Aries_Turbo's Avatar
    Join Date
    Dec 2005
    Location
    Warsaw, NY
    Posts
    8,183

    Re: 88-89 turbo harness (non-minivan)

    Quote Originally Posted by glht_omni View Post
    It's a 2dr very body with T1 auto
    very..... im guessing that autocorrect got you....

    lemme know what it actually is

    Brian

    Quote Originally Posted by turbovanman
    This one is easy, I have myself to blame, I rush things, don't pay attention to gauges when I should, change to much stuff at once then expect miracles, the list is endless.

  12. #12
    Supporting Member II Turbo Mopar Contributor ajakeski's Avatar
    Join Date
    Sep 2007
    Location
    SE Wisconsin
    Posts
    2,448

    Re: 88-89 turbo harness (non-minivan)

    I have a harness from an 89 LeBaron 2.5 turbo I auto car. $100 shipped.

  13. #13
    Hybrid booster
    Join Date
    Dec 2005
    Location
    cedar rapids Iowa
    Posts
    983

    Re: 88-89 turbo harness (non-minivan)

    Sorry Brian, it's a 88 2.2 auto t1 convertible 2 dr lebaron

  14. #14
    turbo addict
    Join Date
    Sep 2006
    Location
    Indianapolis, IN
    Posts
    2,783

    Re: 88-89 turbo harness (non-minivan)

    I've got an 88 J body harness that I had started to add a charge temp wire to. Are you coming to SDAC?

  15. #15
    Boost, it's what's for dinner... Turbo Mopar Staff Aries_Turbo's Avatar
    Join Date
    Dec 2005
    Location
    Warsaw, NY
    Posts
    8,183

    Re: 88-89 turbo harness (non-minivan)

    almost done with my 87 LM harness to SMEC conversion. if it doesnt work as expected, ill get back to you guys.

    no im not going to SDAC this year.

    thanks

    Brian

    Quote Originally Posted by turbovanman
    This one is easy, I have myself to blame, I rush things, don't pay attention to gauges when I should, change to much stuff at once then expect miracles, the list is endless.

Similar Threads

  1. Electronics 89 Turbo Minivan harness Auto
    By Sgt Craig in forum Parts Wanted
    Replies: 1
    Last Post: 10-08-2013, 05:11 PM
  2. Electronics For Sale: 1989 Turbo Minivan Harness
    By ShelGame in forum Parts For Sale
    Replies: 0
    Last Post: 07-20-2013, 06:17 PM
  3. Electronics WTB: 89 Turbo minivan engine harness with SMEC
    By BOOSTIFIED in forum Parts Wanted
    Replies: 5
    Last Post: 07-02-2013, 08:44 PM
  4. Electronics 89 turbo minivan harness
    By 22mopar in forum Parts For Sale
    Replies: 8
    Last Post: 09-17-2011, 10:11 AM
  5. Electronics '90 Minivan Turbo Engine Bay Harness - Complete
    By ShelGame in forum Parts For Sale
    Replies: 8
    Last Post: 03-02-2011, 10:09 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •