I'm swapping in the 89 k-frame with the stamped control arms into my 86 TurboZ. I'm thinking about using PT GT/SRT spindles with BC coil overs and Wilwood brakes. The PT spindle moves the ball joint down 1/2" and the tie rod out 7/8". Any large adverse effects from the differences?
Moving the ball joint down actually helps, especially when lowered.
I would have to think about it a bit more due to the tie rod end being moved downward also, but being moved the way you show it should increase the turning radius. I'm not a fan of that aspect, but everything else looks very good with them.
Me and DodgeZ put SRT-4 knuckles on his GLHS, didn't have any turning issues. Used the Wilwood big brake kit on it too.
Turning ratio should only be a problem if the rack lacks enough motion. Usually the limit to how much the wheels turn is limited by the knuckle to control arm and not by the rack. I would change the steering rate...Originally Posted by Force Fed Mopar
This is good to know. I have some things in mind for my projects, and sounds like this would fit in with those plans.
PT spindles use a different wheel bearing? And is the spline different, or a is it usable with existing axles?
Wayne H.
'91 Dodge Spirit ES 2.5L turbo 5spd
'05 PT GT 2.4T HO autostick (RIP)
'89 Plymouth Acclaim 2.5L turbo auto, "Slugmobile" yes, THE Slugmobile!
'89 Dodge Caravan SE 2.5L turbo auto, "Mean Mini" yes, Gus' Mean Mini! (Current best 11.699 @ 114.43 mph! - Oct 15th, 2022 Cecil County Dragway, MD)
MeanMini dragracing videos: https://www.youtube.com/playlist?lis...URZLB1RxGYF6vw
and other cars, trucks and motorcycles
https://www.youtube.com/user/SlugmobileMeanMini
Existing axles fit. Appears to be different wheel bearing. I can take pictures if you want, have both on the bench.
I think they have the pressed in bearing like the pre-91. But, not sure if the bearing interchanges.
Its too bad they didn't use the bolt on bearing.
Wayne H.
'91 Dodge Spirit ES 2.5L turbo 5spd
'05 PT GT 2.4T HO autostick (RIP)
'89 Plymouth Acclaim 2.5L turbo auto, "Slugmobile" yes, THE Slugmobile!
'89 Dodge Caravan SE 2.5L turbo auto, "Mean Mini" yes, Gus' Mean Mini! (Current best 11.699 @ 114.43 mph! - Oct 15th, 2022 Cecil County Dragway, MD)
MeanMini dragracing videos: https://www.youtube.com/playlist?lis...URZLB1RxGYF6vw
and other cars, trucks and motorcycles
https://www.youtube.com/user/SlugmobileMeanMini
Press in bearings are for the birds.
If this is a good fit, then I should really look into doing this for my 89. I've wanted to upgrade from the base brakes. A Neon/PT setup would certainly give more options!
COULDN'T AGREE MORE.
Jon J.
1989 Daytona ES 2.4L DOHC
2003 Neon SXT - gone but never forgotten
If it ain't broke, fix it 'till it is!
I wonder what it would take to have a bracket made to adapt the wilwood kit to the late knuckles? It seems like it would be the best overall compromise. Bolt in bearings, pushes the ballpoint down, retains turning radius, and allows for the biggest of brakes.
- - - Updated - - -
They also allow for fast 5x114 bolt pattern conversion.
- - - Updated - - -
They also allow for fast 5x114 bolt pattern conversion.
Is it the late knuckle or the cast control arm that moves the wheel from the centre of the wheelwell (forget if it's forward or back)
What exactly do you do for the rear conversion?
Brent GREAT DEPRESSION RACING 1992 Duster 3.0T The Junkyard - MS II, OEM 10:1 -[I] Old - 11.5@125 22psi $90 [U]Stock[/U] 3.0 Junk Motor - 1 bar MAP [/I] 1994 Spirit 3.0T - 11.5@120 20 psi - Daily :eyebrows: Holset He351 -FT600 - 393whp 457ft/lb @18psi 1994 Spirit 3.0T a670 - He341, stock fuel, BEGI. Wife's into kid's project. 1990 Lebaron Coupe 2.2 TI/II non IC, a413 1990 Spirit 3.0 E.S. 41TE -- 1993 Spirit 3.0 E.S. 41TE -- 1994 Duster 3.0 A543 1981 Starlet KP61 Potential driver -- 1981 Starlet KP61 Parts -- 1983 Starlet KP61 Drag 2005 Durango Hemi Limited -- 1998 Dodge 12v 47re. AFC mods, No plate, Mack plug, Boost elbow -- 2011 Dodge 6.7 G56
Check out Jon Trotter's info in his GLHS 937 build thread. He used some LHS/300M rear brakes from what I can recall.
That is correct. Had to get the spindles cut down, but I believe there are before and after pics. There are more steps, but once you have the machined spindle to match the stock one, it's just a matter of matching up the 4 bolt pattern that mates to the axle.
PM me if you have questions.
[SIZE="3"] [B]Jon Trotter[/B][/SIZE] [B]1985[/B] Dodge Shelby Charger, Currently decommissioned [B]1987[/B] Shelby GLHS, #937 [B]1987[/B] Shelby Lancer, #628 [QUOTE=Reeves;587010]I can be ready. Please send pics of wife. _____DodgeZ add comments here______[/QUOTE]
Cast arm, supposedly.
So there's not much modification to be done to fit PT GT knuckles on? I was hoping I could use a Neon (SRT-4?) strut, PT GT knuckles, and PT GT brakes on my Daytona.
That would work so long as you make the provision for the strut to bolt in up top. Frankly, unless you're going to use the Willwood big brake kit for the SRT-4, I don't see an advantage to using the PT knuckle these days. Those brakes call for me though...
Posting Permissions
Reply With Quote
