Results 1 to 4 of 4

Thread: 2 piece intake injector change question.

  1. #1
    Hybrid booster
    Join Date
    Dec 2005
    Location
    Duncan, Vancouver Island, BC, Canada
    Posts
    935

    2 piece intake injector change question.

    It's been a very long time since I've done it. Do I need to remove the fuel pressure regulator to change the injectors on a 2 piece intake?

    Thanks.

  2. #2
    Rhymes with tortoise. Turbo Mopar Staff cordes's Avatar
    Join Date
    Dec 2005
    Location
    Tuscola, IL
    Posts
    21,441

    Re: 2 piece intake injector change question.

    I've done it without removing it before. I've never done it without a lot of foul language either though. These days, I would probably just pull the top half of the two piece and have at it in an easy fashion.

  3. #3
    turbo addict
    Join Date
    Mar 2014
    Location
    Toronto Canada
    Posts
    1,772

    Re: 2 piece intake injector change question.

    the regulator shouldn't be an issue if stock
    issue with the two piece is the minimal space to remove the fuel rail and injectors as the space from the front wall of the top half and the tops of the fuel injector bungs on the manifold is too short

    there is a bit of a trick to this that can help

    don't try to remove the rail and injectors , but instead remove the injector clips from the rail , then remove the rail from the back of the injectors .. then pop the injectors out

    yes you might have to wiggle the injectors back into the manifold as they likely will pop out as you're working but with the tip of the injector still in the bungs on the manifold there's enough room to get the rail back and pulled away from the manifold

    and remember the rail bolt right above the turbo will usually be a bee eye tea sea ach

  4. #4
    Garrett booster
    Join Date
    Feb 2006
    Location
    Ontario
    Posts
    210

    Re: 2 piece intake injector change question.

    I pulled the valve cover and that vacuum barb that is generally in the way.

Similar Threads

  1. Replies: 26
    Last Post: 08-12-2014, 05:30 PM
  2. General Valve Covers, 2 piece intake, Intercooler hoses, injector harness
    By patcsx42 in forum Parts For Sale
    Replies: 18
    Last Post: 07-24-2013, 03:59 AM
  3. Engine 2 piece intake with fuel rail and injector wiring
    By J&H Ryan in forum Parts For Sale
    Replies: 0
    Last Post: 01-15-2012, 01:55 PM
  4. Replies: 2
    Last Post: 03-26-2011, 02:46 PM
  5. Replies: 1
    Last Post: 11-25-2007, 02:01 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •