Results 1 to 10 of 10

Thread: H body Window Motor/Reg needed

  1. #1
    Hybrid booster
    Join Date
    Oct 2011
    Location
    Munford, Tennessee
    Posts
    328

    H body Window Motor/Reg needed

    Looking for a left front window motor/reg assembly for a 1985 Lancer/Lebaron GTS.

  2. #2
    turbo addict looneytuner's Avatar
    Join Date
    Dec 2005
    Location
    Maryland Heights, Mo. St. Loui
    Posts
    1,582

    Re: H body Window Motor/Reg needed

    Are you sure it's not the nylon tape that raises the window. I have not heard of the motor going bad on these. Of course I'm a little senile thanks to some meds! I have extra door if it is the motor. I can pull a motor as soon as it gets warmer than near ZERO/

    I have 2 GTS with 180,000 miles on them.

  3. #3

    Re: H body Window Motor/Reg needed

    4336541 Electric, Left regulator
    4310577 MOTOR w/MECHANISM, Electric Window, Left

  4. #4
    Hybrid booster
    Join Date
    Jan 2009
    Location
    Mothers Proving Grounds
    Posts
    254

    Re: H body Window Motor/Reg needed

    Have fun removing the aluminum rivets that mount the regulator to the inner door panel. I've found that my Makita grinding wheel works best for burning those rivet heads off. Replacements that work well are 1/4"X1/4X20 1/2 inch long grade 5's with star washer nuts attached for locking them back down. Ask me if I've done this, lol Jer

  5. #5
    turbo addict
    Join Date
    Mar 2014
    Location
    Toronto Canada
    Posts
    1,772

    Re: H body Window Motor/Reg needed

    a punch to knock the steel pin out of the rivet and a drill bit will make much less mess

    I simply used some nuts /bolts and washers for reinstall

    also a really huge help is a friend to stand behind the door and hold it while you work so the door doesn't flap like a wing while working in it

  6. #6
    Supporting Member II Turbo Mopar Contributor ajakeski's Avatar
    Join Date
    Sep 2007
    Location
    SE Wisconsin
    Posts
    2,624

    Re: H body Window Motor/Reg needed

    I have them.

  7. #7
    turbo addict
    Join Date
    Mar 2014
    Location
    Toronto Canada
    Posts
    1,772

    Re: H body Window Motor/Reg needed

    Quote Originally Posted by Dr. Johny Dodge View Post
    a punch to knock the steel pin out of the rivet and a drill bit will make much less mess

    I simply used some nuts /bolts and washers for reinstall

    also a really huge help is a friend to stand behind the door and hold it while you work so the door doesn't flap like a wing while working in it
    I should have said "large drill bit"
    you only want it to cut the head off the rivet , not drill through the door

    I've done a few motor replacements as well as 2 or 3 manual to power conversions (daytona)
    - the rivet heads are pretty soft being aluminum so it isn't hard to remove them

  8. #8
    Hybrid booster
    Join Date
    Jan 2009
    Location
    Mothers Proving Grounds
    Posts
    254

    Re: H body Window Motor/Reg needed

    That's why I commented on the replacement 1/4" bolts and nuts when I said to just burn the heads off with a Mikita. That's the size of the hole in the inner panel that those rivets are set in!. What mess? Jer

  9. #9
    Hybrid booster
    Join Date
    Oct 2011
    Location
    Munford, Tennessee
    Posts
    328

    Re: H body Window Motor/Reg needed

    Quote Originally Posted by looneytuner View Post
    Are you sure it's not the nylon tape that raises the window. I have not heard of the motor going bad on these. Of course I'm a little senile thanks to some meds! I have extra door if it is the motor. I can pull a motor as soon as it gets warmer than near ZERO/

    I have 2 GTS with 180,000 miles on them.
    That's what I thought, but when I got in the door, the prior owner tried to do something to the regulator and there are parts missing, otherwise I would just fix it. Besides that, I need a whole unit ready to go in, because she lives in NC and I usually only have a couple hours to mess with it at a time.

    Sent from my VS996 using Tapatalk

  10. #10
    Supporting Member II Turbo Mopar Contributor ajakeski's Avatar
    Join Date
    Sep 2007
    Location
    SE Wisconsin
    Posts
    2,624

    Re: H body Window Motor/Reg needed

    Found them and sent you a PM.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	DF3A4574-7563-44D0-8512-229E2BEF4B1B.jpeg 
Views:	105 
Size:	2.32 MB 
ID:	62013  

Similar Threads

  1. G-Body Rear Motor Mount Needed?
    By LaserDad in forum Transmission
    Replies: 15
    Last Post: 09-03-2014, 12:53 PM
  2. Window motor possessed...
    By John B in forum Interior, Exterior and Chassis Modifications
    Replies: 3
    Last Post: 04-25-2013, 08:18 AM
  3. window motor
    By 5sp. mini in forum Maintenance & General Tech
    Replies: 1
    Last Post: 01-30-2011, 10:39 AM
  4. Engine NEEDED BADLY!! L body passenger motor mount!
    By saw wave analog in forum Parts Wanted
    Replies: 4
    Last Post: 04-14-2010, 02:41 PM
  5. General '92 Shadow Power Window Motor / Regulator Needed
    By cqlink in forum Parts Wanted
    Replies: 10
    Last Post: 09-11-2008, 08:43 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •