Results 1 to 12 of 12

Thread: Headlight Adjusters

  1. #1
    Rhymes with tortoise. Turbo Mopar Staff cordes's Avatar
    Join Date
    Dec 2005
    Location
    Tuscola, IL
    Posts
    18,827

    Headlight Adjusters

    Does anyone know of a good quality replacement headlight adjuster for the early style sealed beam units? I need to replace one on my 87 NYer, and the Dorman ones are laughably bad. They wouldn't hold in place and broke when I attempted to force them in far enough to pick out the wings so it would stay.

    Once I have this replaced, I'll have a perfect set of Hella E code housings with relays and nice bulbs on yet another vehicle. I was driving home last night and a white road sign was blinding me with my high beams on.

  2. #2
    Hybrid booster
    Join Date
    Mar 2014
    Location
    Toronto Canada
    Posts
    794

    Re: Headlight Adjusters

    my only suggestion would be the scrapyard
    anything that survives removal is probably good to go

    and there would be lots of chances to try

  3. #3
    boostaholic
    Join Date
    Nov 2006
    Location
    Rochester, New York, United St
    Posts
    1,070

    Re: Headlight Adjusters

    I used the Dorman ones, but I took the screws out and boiled them in water for a few minutes to soften them up before installing. I still broke a pair, but the ones I managed to install have been in there for a few years now without breaking.

  4. #4
    Moderator Turbo Mopar Staff Force Fed Mopar's Avatar
    Join Date
    Dec 2005
    Location
    Greenville/Spartanburg SC area
    Posts
    7,263

    Re: Headlight Adjusters

    Yeah I take the screws out before installing, takes a bit of care still but works better.
    Rob M.
    '89 Turbo GTC
    2.5 TIII swap is here!

    Project LookOwt
    '91 Daytona ES, 61k original miles, Rick Lozier's old 3.0 nitrous car
    Back to basics, then the mods go back on....

  5. #5
    turbo addict
    Join Date
    Aug 2009
    Location
    Myrtle Beach, SC
    Posts
    1,859

    Re: Headlight Adjusters

    The ones I ordered from rockauto for my lancer sucked. I want to say they were dorman. I didn't realize the screws were way longer and cracked the plastic around where the adjuster goes in. Had to get creative to fix that. I reused all the old screws.

  6. #6
    Garrett booster
    Join Date
    Jan 2009
    Location
    Mothers Proving Grounds
    Posts
    203

    Re: Headlight Adjusters

    Dorman has known about the crappy brittle plastic for 3 years that I know of and still they do nothing to fix the problem. TRY TO CONTACT THAT CUSTOMER SERVICE LINE. Stuff the new adjusters in the rectangular holes and the little "tensioner ears" break off. BTW the HELP stuff in all the parts stores IS DORMAN STUFF TOO, Jer

  7. #7
    turbo addict looneytuner's Avatar
    Join Date
    Dec 2005
    Location
    Maryland Heights, Mo. St. Loui
    Posts
    1,552

    Re: Headlight Adjusters

    Quote Originally Posted by thedon809 View Post
    The ones I ordered from rockauto for my lancer sucked. I want to say they were dorman. I didn't realize the screws were way longer and cracked the plastic around where the adjuster goes in. Had to get creative to fix that. I reused all the old screws.
    I figured that out the hard way also. On the H bodies the cavity for the screw is too small on the outside one if you don't reuse the original machine screws.

  8. #8
    turbo addict
    Join Date
    Dec 2005
    Location
    Sylmar, CA
    Posts
    2,443

    Re: Headlight Adjusters

    Nylon seems to dehydrate. bought some bad zip ties which broke when you tightened em, soaked em in hot water, less of em broke.
    John Laing "The sole condition which is required in order to succeed in centralizing the supreme power in a democratic community, is to love equality, or to get men to believe you love it. Thus the science of despotism, which was once so complex is simplified, and reduced . . . . to a single principle." -- Alexis de Tocqueville "One of the methods used by statists to destroy capitalism consists in establishing controls that tie a given industry hand and foot, making it unable to solve its problems, then declaring that freedom has failed and stronger controls are necessary." --Ayn Rand "To evolve, you don't need a Constitution. All you need is a legislature and a ballot box . . . . things will evolve as much as you want. All of these changes can come about democratically; you don't need a Constitution to do that and it's not the function of a Constitution to do that." -- Justice Antonin Scalia

  9. #9
    Supporting Member Turbo Mopar Contributor supercrackerbox's Avatar
    Join Date
    Dec 2005
    Location
    Firth, Nebraska
    Posts
    4,797

    Re: Headlight Adjusters

    Has anyone tried Clipsandfasteners.com?

  10. #10
    Rhymes with tortoise. Turbo Mopar Staff cordes's Avatar
    Join Date
    Dec 2005
    Location
    Tuscola, IL
    Posts
    18,827

    Re: Headlight Adjusters

    I don't see one which looks like ours going off of the pics. Does anyone have the PN for them?

  11. #11
    Mitsu booster
    Join Date
    Dec 2005
    Location
    Connecticut
    Posts
    27

    Re: Headlight Adjusters

    For sale: I have a new set of five Mopar adjusters purchased from a Dodge dealer years ago probably 2001.
    Looks like the part number is 5-04334140 but there are a lot of other numbers on the package.
    They were bought for my 1985 Omni GLH-T. They are for sale.

    - - - Updated - - -

    For sale: I have a new set of five Mopar adjusters purchased from a Dodge dealer years ago probably 2001.
    Looks like the part number is 5-04334140 but there are a lot of other numbers on the package.
    They were bought for my 1985 Omni GLH-T. They are for sale.

  12. #12
    Mitsu booster
    Join Date
    May 2016
    Location
    Austin, TX
    Posts
    43

    Re: Headlight Adjusters

    How much?

Similar Threads

  1. Best adjusters
    By jeff1234 in forum Engine - Block, Piston, Heads, Intakes
    Replies: 12
    Last Post: 11-05-2015, 11:29 AM
  2. Headlight adjusters second gen G body
    By inplansight in forum "I need help!"
    Replies: 6
    Last Post: 03-24-2014, 11:03 PM
  3. Headlight Adjusters
    By turbodaytona87 in forum "I need help!"
    Replies: 8
    Last Post: 01-16-2013, 08:11 PM
  4. Headlight Adjusters
    By turbodaytona87 in forum Interior, Exterior and Chassis Modifications
    Replies: 0
    Last Post: 01-12-2013, 10:21 PM
  5. ~92-93 G-Body (Daytona) headlight adjusters
    By Rectangle in forum Parts Wanted
    Replies: 0
    Last Post: 04-18-2007, 06:31 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •