Hey Chris:
Do you have any Venolias in stock??
Looking for two 2.5's and possibly a set.
Thanks
Randy
PS: What's the best way to contact you?
Hey Chris:
Do you have any Venolias in stock??
Looking for two 2.5's and possibly a set.
Thanks
Randy
PS: What's the best way to contact you?
There is no logical reason to call an Engine a motor.
Randy Hicks
86 GLHS60
86 GLHS 373 : SOLD, but never forgotten
89 Turbo Minivan
83 Turbo Rampage : SOLD
Edmonton,Alberta,Canada
602-762-6678 is what I use or
sales@turbosunleashed.com
Regards,
Miles
DD '87 Sundance T1, SLH with rear disks
'87 CSX #432 2.5 CB TII, SLH
Those are Wiesco...which I prefer anyhow....save the better this, or better that replies, Ive used Venoila's also and they are great pistons BUT you can run tighter tolerance on the Wiesco's.
Okay, went to the site and see they now carry Venoilas...been awhile but still endorse Weisco instead!!!
Only problem with wiseco is they require unique rings.
I was under the impression that Venolia no longer makes pistons for our cars, this is why i purchased Wiesco.
Regards,
Miles
DD '87 Sundance T1, SLH with rear disks
'87 CSX #432 2.5 CB TII, SLH
Most piston makers will make custom pistons anyways.
I heard Venolia closed up shop but was hoping Chris might have some still in stock.
I have a personal grudge against Wiseco from many years back when I custom ordered a 2.2 set.
Pistons were fine but the company didn't treat me right.
I still have a set of forged TRW 2.2 pistons but am considering going 2.5 this time.
No rush as I'm still 1 handed, just trying to weigh options and get prepared.
Thanks
Randy
There is no logical reason to call an Engine a motor.
Randy Hicks
86 GLHS60
86 GLHS 373 : SOLD, but never forgotten
89 Turbo Minivan
83 Turbo Rampage : SOLD
Edmonton,Alberta,Canada
JE pistons maybe? Diamond will make custom pistons. So will Ross.
I'm hoping not to go custom, I already have 2 forged 2.5 Venolias and would like to get some more.
I thought I had 4 but 2 turned out to be forged 2.2's!!
I've had them for years and thought they were 2.5's until I re-found them.
Thanks
Randy
There is no logical reason to call an Engine a motor.
Randy Hicks
86 GLHS60
86 GLHS 373 : SOLD, but never forgotten
89 Turbo Minivan
83 Turbo Rampage : SOLD
Edmonton,Alberta,Canada
If you go with Diamond make sure EVERYTHING is crystal clear as I've had the worst luck over the years using them. Two orders in a row even the quantity was wrong! There have been numerous other "issues" too. With that said, they're an excellent piston. Last set of Ross pistons took like 6 months to get, who can wait that long for pistons? IMO, give our vendors Cindy or Chris for Venolia's or Wiseco's a call. If your looking for JE's contact Mike @ FM and have him order them for you. CP also makes pistons too.
Not sure if Cindy or Chris are back home yet, as both drove to SDAC this year and taking the scenic route back home. Both I'm sure are checking email and messages.
Todd
Appreciate your input Todd.
I figured Chris would be busy with SDAC and the 4th is no rush.
Will try Cindy as well.
Thanks
Randy
Last edited by GLHS60; 07-01-2019 at 04:10 PM.
There is no logical reason to call an Engine a motor.
Randy Hicks
86 GLHS60
86 GLHS 373 : SOLD, but never forgotten
89 Turbo Minivan
83 Turbo Rampage : SOLD
Edmonton,Alberta,Canada
Chris Wright www.TurbosUnleashed.com Chris@TurbosUnleashed.com 602-76-BOOST Tech/Sales#: Monday-Saturday 9AM-7PM MST Proudly Serving the Turbo-Mopar Community since 1997 TU is a performance, not marketing company. We provide accurate performance data on all our performance products. Fabricating data to make us appear better is just not our style. Do the research before you buy. ROCK BOTTOM PRICES WITHOUT THE HIDDEN HANDLING FEES.... -----HOME OF THE 9 SECOND FWD T-M CLUTCH-----
Will do!!
602-762-6678??
Thanks
Randy
There is no logical reason to call an Engine a motor.
Randy Hicks
86 GLHS60
86 GLHS 373 : SOLD, but never forgotten
89 Turbo Minivan
83 Turbo Rampage : SOLD
Edmonton,Alberta,Canada