looking for a good water pump housing Lancer body
looking for a good water pump housing Lancer body
4343847 is the Mopar #
4343848 is cast on the part
1986-1990 is the same
I'll do some checking around my stuff and I have a friend that has a garage bustin at the seams with 2.2 parts. So your looking for pre common block and non L-body correct? You need the 3/4" nipple on the housing correct?
Todd
Todd, yea non L body with that nipple that points to the drivers side.Pre common block. Although based on what Marty is saying the number could go into 90 so that would be common block.
Frank,
Yeah books don't tell the whole story. The 89 & 90 years was probably Q-body alone that used the early style pump and housing. They did use the early WP housing on the CB engines. IIRC, 85 was a different part # because no body styles had the nipple on the housing. The factory used a tee in the lower radiator hose in the early years. The 86-88 non L-body is what you want. Then add in the tall deck 2.5 engines and they just sort of muddy the waters if looking strictly at parts catalogs. 4343847, 4343848 SOP is what you want, but I do see a listing for 4343732 for H & K bodies ONLY in 86? That is sort of odd? Then it changes again in 87/88 and H body uses the 4343847 # again?
Todd
I've got them used.....nothing new