Results 1 to 6 of 6

Thread: 88 water pump housing

  1. #1
    boostaholic
    Join Date
    Dec 2012
    Location
    Houston
    Posts
    1,265

    88 water pump housing

    looking for a good water pump housing Lancer body

  2. #2

    Re: 88 water pump housing

    4343847 is the Mopar #

    4343848 is cast on the part

    1986-1990 is the same

  3. #3
    turbo addict
    Join Date
    Dec 2006
    Location
    MPLS, MN
    Posts
    3,589

    Re: 88 water pump housing

    I'll do some checking around my stuff and I have a friend that has a garage bustin at the seams with 2.2 parts. So your looking for pre common block and non L-body correct? You need the 3/4" nipple on the housing correct?
    Todd

  4. #4
    boostaholic
    Join Date
    Dec 2012
    Location
    Houston
    Posts
    1,265

    Re: 88 water pump housing

    Todd, yea non L body with that nipple that points to the drivers side.Pre common block. Although based on what Marty is saying the number could go into 90 so that would be common block.

  5. #5
    turbo addict
    Join Date
    Dec 2006
    Location
    MPLS, MN
    Posts
    3,589

    Re: 88 water pump housing

    Frank,
    Yeah books don't tell the whole story. The 89 & 90 years was probably Q-body alone that used the early style pump and housing. They did use the early WP housing on the CB engines. IIRC, 85 was a different part # because no body styles had the nipple on the housing. The factory used a tee in the lower radiator hose in the early years. The 86-88 non L-body is what you want. Then add in the tall deck 2.5 engines and they just sort of muddy the waters if looking strictly at parts catalogs. 4343847, 4343848 SOP is what you want, but I do see a listing for 4343732 for H & K bodies ONLY in 86? That is sort of odd? Then it changes again in 87/88 and H body uses the 4343847 # again?
    Todd

  6. #6

    Re: 88 water pump housing

    I've got them used.....nothing new

Similar Threads

  1. can i use a non cb water pump housing on a cb?
    By Bardo in forum Engine - Block, Piston, Heads, Intakes
    Replies: 13
    Last Post: 05-24-2011, 12:00 PM
  2. Engine Water Pump Housing
    By badandy in forum Parts Wanted
    Replies: 3
    Last Post: 07-21-2010, 12:49 AM
  3. Engine Water Pump Housing
    By Shelbydaytona91 in forum Parts Wanted
    Replies: 2
    Last Post: 03-04-2010, 09:43 PM
  4. General 88 water pump housing?
    By TurboII in forum Parts For Sale
    Replies: 0
    Last Post: 08-13-2008, 10:52 PM
  5. Engine water pump housing
    By jake in forum Parts Wanted
    Replies: 2
    Last Post: 07-30-2008, 07:33 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •