Page 1 of 10 12345 ... LastLast
Results 1 to 20 of 195

Thread: MPSciLink device pre-order

  1. #1
    Slugmobile & MeanMini Caretaker Turbo Mopar Contributor wheming's Avatar
    Join Date
    Nov 2010
    Location
    Raleigh Area, NC
    Posts
    3,720

    MPSciLink device pre-order

    MPSciLink device now taking Pre-orders!

    The device development is ready for taking of pre-orders. EDIT: NOW READY FOR ORDER!
    https://sites.google.com/site/mpscilinkorder/

    Device development, operation, and features discussion can be found in the other thread here:- http://www.turbo-mopar.com/forums/sh...ad.php?t=79268

    The mpscilink device can be purchased in DIY kit form, or as an assembled unit.-
    DIY kit with version2 PCB board and all necessary board components will be about $20.

    Fully assembled and tested device will run about $50 as this is about 2-3 hrs of expert assembly and testing.

    This device is used with an Arduino Mega 2560 or clone,- (I bought mine for about $17 on Amazon).- We can provide the required Arduino clone for $10.- (As we purchase a bulk quantity we can provide them at a discount.)

    Display Screen options,
    Nextion 3.5" touchscreen runs about $35
    (I'm looking to try out a Nextion 5" touchscreen for about $70-75, hope to find it cheaper somewhere.)
    But, remember this device is/can be used in conjunction with mpscandroid on your Android phone or tablet so a large display isn't really necessary.

    The device will require some type of housing, protective project case.- Display protective cases can seperate the display from the main unit for remote mounting.
    End user can customize their own installation with cases of their choice.- Or we can provide some case options for about $10.
    The device uses the diagnostic port for the communication, but does not require a programmed ftdi cable.- Simple wiring can be used.- I used 4 conductor 20 or 22 ga instrument wire for the Tx/Rx and the +/- all in one off the diagnostic port with simple spade connectors, and terminal board pins.- I may be able to source additional wire to include for free or low cost if possible.- If not, you'll need your own wire and connectors.

    At this time there is inventory for (4) units.- As DIY kits they would be ready to ship.- Those could be assembled also with a short wait.
    There is partial inventory for an additional 5.- So with a bit of lead time to receive some missing components these could be available as DIY kits, or again assembled.
    Beyond these 9, there would be additional wait to restock the necessary components.

    If you would like to pre-order, please reply here with # of units and type DIY or assembled.
    The first (4) on the list should get their device within the next few weeks.

    Shipping anywhere in the US should be $15 (Priority medium flat rate box), International will be more, Canada shipping might be less, as some items may originate from Canada.

    I'll work on an order form to summarize all this into a better format, menu type order tool, to calculate total costs with available options and post.
    Just wanted to get this info out there so we can gauge the present interest and what items we will need, and quantities.

    -Special Thanks to team "M&M", (Morris and Miles) for their expertise and skills in developing this, and in realizing this to a working product for our group.- It's great working with you both!
    Last edited by wheming; 10-29-2017 at 03:02 AM.
    Wayne H.

    '91 Dodge Spirit ES 2.5L turbo 5spd
    '05 PT GT 2.4T HO autostick
    '89 Plymouth Acclaim 2.5L turbo auto, "Slugmobile" yes, THE Slugmobile!
    '89 Dodge Caravan SE 2.5L turbo auto, "Mean Mini" yes, Gus' Mean Mini! (Current best 11.7786@113.04 mph! - Jan 15th, 2017 Fayetteville Dragway, NC)
    MeanMini dragracing videos: https://www.youtube.com/playlist?lis...URZLB1RxGYF6vw
    and other cars, trucks and motorcycles
    https://www.youtube.com/user/SlugmobileMeanMini

  2. #2
    Supporting Member II Turbo Mopar Contributor ilovethecane69's Avatar
    Join Date
    Dec 2016
    Location
    Keego Harbor, Michigan
    Posts
    12

    Re: MPSciLink device pre-order

    I will take (1) assembled.

    Dave

  3. #3
    Boost, it's what's for dinner... Turbo Mopar Staff Aries_Turbo's Avatar
    Join Date
    Dec 2005
    Location
    Warsaw, NY
    Posts
    7,951

    Re: MPSciLink device pre-order

    (1) assembled and tested unit with (1) Arduino mega clone please.

    EDIT, on second thought, ill source the screen through you guys and id like a protective case too.

    Thanks.
    Last edited by Aries_Turbo; 10-02-2017 at 09:33 PM.

    Quote Originally Posted by turbovanman
    This one is easy, I have myself to blame, I rush things, don't pay attention to gauges when I should, change to much stuff at once then expect miracles, the list is endless.

  4. #4
    turbo addict
    Join Date
    Aug 2009
    Location
    Myrtle Beach, SC
    Posts
    1,847

    Re: MPSciLink device pre-order

    1 assembled. Clone is fine.

  5. #5
    Supporting Member Turbo Mopar Contributor
    Join Date
    Feb 2015
    Location
    toronto
    Posts
    516

    Re: MPSciLink device pre-order

    I have a few more parts arriving tomorrow so I should be able to produce 5 or 6 over the next week or two
    Regards,
    Miles

    DD '87 Sundance T1, 12PSI, SLH with rear disks
    Project '87 CSX #432
    Donor car '88 Daytona Shelby Z, TII with S60 Turbo/smec, 3 bar.

  6. #6
    turbo addict
    Join Date
    Feb 2010
    Location
    Piedmont, Ohio
    Posts
    4,097

    Re: MPSciLink device pre-order

    I will take a DIY kit please with clone
    Ian Adams Function>Form 1990 shadow scrapped, too rusty:( 1991 Spirit R/T Scrapped, parts sold:( 1989 Turbo Caravan Daily beater with built-[I]ish [/I]​engine slowly evolving into weekend turbo beater.

  7. #7
    Supporting Member Turbo Mopar Contributor shmedley's Avatar
    Join Date
    Dec 2005
    Location
    Downers Grove, IL
    Posts
    681

    Re: MPSciLink device pre-order

    I would like an assembled and tested unit with an Arduino clone please. No real rush for me I can wait till a second or third group completion
    Thanks
    Brad S.

    SDAC National Proud Member
    SDAC Chicago Proud Member
    14 Ram 1500
    86 SC Work in progress...
    85 SC Soon to be a pop can

  8. #8
    turbo addict Turbo Mopar Contributor
    Join Date
    Sep 2008
    Location
    Salt Lake City UT
    Posts
    1,560

    Re: MPSciLink device pre-order

    I understand that information is available in the other thread but it would be awesome if there was a "sales brochure" one page pdf with pictures, and features explaining this device and how it works. I would especially be interested in the assembly and testing instructions to see if it worth me doing it or just buy it assembled.

  9. #9
    Slugmobile & MeanMini Caretaker Turbo Mopar Contributor wheming's Avatar
    Join Date
    Nov 2010
    Location
    Raleigh Area, NC
    Posts
    3,720

    Re: MPSciLink device pre-order

    Quote Originally Posted by 1BADVAN View Post
    I understand that information is available in the other thread but it would be awesome if there was a "sales brochure" one page pdf with pictures, and features explaining this device and how it works. I would especially be interested in the assembly and testing instructions to see if it worth me doing it or just buy it assembled.
    Ideally i can try to get that put together once i have an assembled v2 board device. I do have some pics on my phone of my prototype v1 test unit. That can give some basic ideas.
    I have a draft of an order form, that is a bit easier to look at and calculate what you'd be in for.
    Here is a sample of the draft order form. The process is not in place yet, and some component suppliers are foreign with longer lead times.
    https://docs.google.com/spreadsheets/d/1z5nf4P8wjXdzL2qpFSVUmb9nWd5vK4gchkHYuv_f8vY/edit?usp=sharing

    As far as assembling a device board, i would say if you aren't trained or a hobbyist familiar with soldering circuitboards, i would suggest an assembled unit.

    We will work to provide some summarized brochure stye product description. But, without having some product packaging, it looks like it is, an arduino based project with the mpscilink board/shield and a display. But, this also gives the customer the opportunity to customize the housing, mounting configuration, HMI screen placement, etc. The big appeal of this product is the function and capabilities to aid in tuning to your goals.

    I'll see if i can whip something up this weekend with the pics i have available.
    Last edited by wheming; 10-01-2017 at 09:59 PM.
    Wayne H.

    '91 Dodge Spirit ES 2.5L turbo 5spd
    '05 PT GT 2.4T HO autostick
    '89 Plymouth Acclaim 2.5L turbo auto, "Slugmobile" yes, THE Slugmobile!
    '89 Dodge Caravan SE 2.5L turbo auto, "Mean Mini" yes, Gus' Mean Mini! (Current best 11.7786@113.04 mph! - Jan 15th, 2017 Fayetteville Dragway, NC)
    MeanMini dragracing videos: https://www.youtube.com/playlist?lis...URZLB1RxGYF6vw
    and other cars, trucks and motorcycles
    https://www.youtube.com/user/SlugmobileMeanMini

  10. #10
    Slugmobile & MeanMini Caretaker Turbo Mopar Contributor wheming's Avatar
    Join Date
    Nov 2010
    Location
    Raleigh Area, NC
    Posts
    3,720

    Re: MPSciLink device pre-order

    Quote Originally Posted by 1BADVAN View Post
    I understand that information is available in the other thread but it would be awesome if there was a "sales brochure" one page pdf with pictures, and features explaining this device and how it works. I would especially be interested in the assembly and testing instructions to see if it worth me doing it or just buy it assembled.
    Working on a brochure. It is a working draft that I'll need to have Morris and Miles fill in some info.

    As far as the "how it works" that will be covered more in depth in some operating instructions and/or knowledge center manual.
    The brochure is highlighting the features and capabilities. And some technical specifications.
    Wayne H.

    '91 Dodge Spirit ES 2.5L turbo 5spd
    '05 PT GT 2.4T HO autostick
    '89 Plymouth Acclaim 2.5L turbo auto, "Slugmobile" yes, THE Slugmobile!
    '89 Dodge Caravan SE 2.5L turbo auto, "Mean Mini" yes, Gus' Mean Mini! (Current best 11.7786@113.04 mph! - Jan 15th, 2017 Fayetteville Dragway, NC)
    MeanMini dragracing videos: https://www.youtube.com/playlist?lis...URZLB1RxGYF6vw
    and other cars, trucks and motorcycles
    https://www.youtube.com/user/SlugmobileMeanMini

  11. #11
    turbo addict Turbo Mopar Contributor
    Join Date
    Sep 2008
    Location
    Salt Lake City UT
    Posts
    1,560

    Re: MPSciLink device pre-order

    Thanks for the info!

  12. #12
    Supporting Member II Turbo Mopar Contributor ajakeski's Avatar
    Join Date
    Sep 2007
    Location
    SE Wisconsin
    Posts
    2,338

    Re: MPSciLink device pre-order

    Iíll take one assembeld unit with a clone. Let me know where to pay.
    http://www.greatlakeshotrod.com/Grea...kage_Kits.html
    L-Body Shift Linkage Upgrade all in one convenient kit!

  13. #13
    Slugmobile & MeanMini Caretaker Turbo Mopar Contributor wheming's Avatar
    Join Date
    Nov 2010
    Location
    Raleigh Area, NC
    Posts
    3,720

    Re: MPSciLink device pre-order

    I've updated the order form, and looks to be at a point it would be usable.
    If anyone wants to preview or offer suggestions here is the updated link:
    https://docs.google.com/spreadsheets...it?usp=sharing

    I'm not up on all the tech nerd stuff, so I need to figure out how best to take the orders, would be nice if the form could be submitted online, or I guess could just be saved and emailed. Probably just simplest to just download and email. We won't be talking thousands of orders per year or anything!

    The only thing I'm not sure yet is final pricing from suppliers of the major components. And really the highest cost item is the HMI touchscreen display.
    That is going to by far the biggest effect on overall package price.

    I'd like to "publish" the brochure, I've worked with it enough that I need a proof-read/redlines from the rest of the team. But it is close.
    And no, I did not go to school for marketing!
    Wayne H.

    '91 Dodge Spirit ES 2.5L turbo 5spd
    '05 PT GT 2.4T HO autostick
    '89 Plymouth Acclaim 2.5L turbo auto, "Slugmobile" yes, THE Slugmobile!
    '89 Dodge Caravan SE 2.5L turbo auto, "Mean Mini" yes, Gus' Mean Mini! (Current best 11.7786@113.04 mph! - Jan 15th, 2017 Fayetteville Dragway, NC)
    MeanMini dragracing videos: https://www.youtube.com/playlist?lis...URZLB1RxGYF6vw
    and other cars, trucks and motorcycles
    https://www.youtube.com/user/SlugmobileMeanMini

  14. #14

    Re: MPSciLink device pre-order

    Would like one (1) with the required hardware to plug and play, i.e., case and board. I have an FTDI cable already wired directly to the LM, so not sure what cabling I'd need. Wayne, I'll talk to you via text. Just kidding, I'll PM you.
    [SIZE="3"] [B]Jon Trotter[/B][/SIZE] [B]1985[/B] Dodge Shelby Charger, Currently decommissioned [B]1987[/B] Shelby GLHS, #937 [B]1987[/B] Shelby Lancer, #628 [QUOTE=Reeves;587010]I can be ready. Please send pics of wife. _____DodgeZ add comments here______[/QUOTE]

  15. #15
    Garrett booster
    Join Date
    Jan 2017
    Location
    LosAngeles
    Posts
    67

    Re: MPSciLink device pre-order

    i would like one as well assembled, clone is fine with me, case and board.

  16. #16
    Hybrid booster
    Join Date
    Mar 2013
    Location
    Trucksville, PA
    Posts
    436

    Re: MPSciLink device pre-order

    First time seeing this idea/product!!!
    I had no idea this was being considered; let alone developed!!!
    I'm IN for one; complete from start(having no pieces of what's required, other than the SMEC system) to finish(everything required to operate minus the phone/SD card).

    I'll be sending a PM.
    Thanks, in advance.


    Sent from my iPhone using Tapatalk

  17. #17
    Supporting Member II Turbo Mopar Contributor turbo_III's Avatar
    Join Date
    Aug 2009
    Location
    Winnipeg, MB, Canada
    Posts
    88

    Re: MPSciLink device pre-order

    I'm in for one unassembled kit with case, board and arduino clone. I'm not in any rush.
    • 1992 Daytona IROC R/T - Red - is now Holset Powered (HE341)

  18. #18
    We Todd D dot D Turbo Mopar Staff sdac guy's Avatar
    Join Date
    Dec 2005
    Location
    Near Detroit MI
    Posts
    4,541

    Re: MPSciLink device pre-order

    I'm in for one assembled, arduino clone, display, and case

    I've downloaded the order form, awaiting where to send it and who/where to pay.


    Barry
    86 Shelby Lancer Prototype
    90 Daytona Shelby VNT
    91 Spirit R/T



    For your questions about SDAC, please contact BadAssPerformance


  19. #19
    Slugmobile & MeanMini Caretaker Turbo Mopar Contributor wheming's Avatar
    Join Date
    Nov 2010
    Location
    Raleigh Area, NC
    Posts
    3,720

    Re: MPSciLink device pre-order

    I have what I believe to be a decent product information brochure.

    A pdf version will be posted after the final edits.

    It can be viewed here:
    https://docs.google.com/document/d/1...t?usp=drivesdk

    I'm going to try and add a couple better pictures, but I think it is usable. If there are any questions, or comments, please let me know.

    In other updates, 1BADVAN graciously offered some assistance by setting up a "storefront" for the eventual ordering and payment.
    Those of you who will use paypal will be able to use that site. Others paying with money order or other payments (we haven't discussed other acceptable forms of payment) will have to use the Order Form previously linked.

    We appreciate your interest, and your patience while we complete the final stage of version2 product revision testing, and finish setting up the production and delivery process.
    I'm in just as much anticipation as you all, trust me!
    Wayne H.

    '91 Dodge Spirit ES 2.5L turbo 5spd
    '05 PT GT 2.4T HO autostick
    '89 Plymouth Acclaim 2.5L turbo auto, "Slugmobile" yes, THE Slugmobile!
    '89 Dodge Caravan SE 2.5L turbo auto, "Mean Mini" yes, Gus' Mean Mini! (Current best 11.7786@113.04 mph! - Jan 15th, 2017 Fayetteville Dragway, NC)
    MeanMini dragracing videos: https://www.youtube.com/playlist?lis...URZLB1RxGYF6vw
    and other cars, trucks and motorcycles
    https://www.youtube.com/user/SlugmobileMeanMini

  20. #20
    Hybrid booster
    Join Date
    Mar 2013
    Location
    Trucksville, PA
    Posts
    436

    Re: MPSciLink device pre-order

    Thank you for the updates.
    And bravo my friend. This is incredible!!! 👍🏻


    Sent from my iPhone using Tapatalk

Page 1 of 10 12345 ... LastLast

Similar Threads

  1. MPSciLink
    By wowzer in forum EFI Tuning
    Replies: 180
    Last Post: 11-22-2017, 09:30 AM
  2. Electronics Dawes Device
    By boost geek in forum Parts For Sale
    Replies: 2
    Last Post: 10-05-2008, 02:01 AM
  3. General Dawes device/EGT
    By 87ShelbyZ in forum Parts Wanted
    Replies: 2
    Last Post: 05-13-2008, 11:30 PM
  4. Electronics Dawes Device
    By SpoolinGLH in forum Parts For Sale
    Replies: 3
    Last Post: 04-16-2008, 01:13 AM
  5. dawes device on a n/a car
    By Murphy in forum Electrical & Fuel System
    Replies: 5
    Last Post: 05-14-2006, 11:02 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •