I guess its not really a build log per say, but I wanted to share some pictures of my current progress and figured this would be a better place then tacking them onto one of my current threads. Maybe somebody can use them for reference one day. The new engine is almost put together and the van is almost ready to receive it.









Here's a shortlist of whats been done:

Engine:
- 1993 Spirit 3.0- 10:1 Diamante Pistons, Bored .20 over, Magnafluxed crank, rebuilt with TopLine gasket set etc.
- Home ported spirit exhaust manifolds, cerakoted
- 52mm Polished TB
- Swapped over van accessory drives/plates/fuel
- Rebuilt heads. (valve job, cleaned, polished and smoothed)
- New, stock Fuel Injectors
- All hardware replaced, hand cleaned and polished/painted. Every aluminum part wire wheeled and polished or painted.

Van:

- Daytona struts/springs front
- Custom spring pack work in the rear
- ALL brake components replaced with NEW Raybestos parts
- Energy suspension control arm bushing set.
- 16" Wheels and tires
- Took apart and repaired/rewrapped entire wiring harness.
- Painted engine bay and front end.
- All new wear components. (Radiator, hoses, belts, gaskets, ball joints, tie rod ends, washer pump, PS lines, etc etc etc.)
- Kenwood stereo with 5.5" round kickers in the front Jensen 6x9 in the rear.
- Dents fixed, Paint correction, bumpers removed and repainted, custom emblems, NOS bugsheild.