SBEC Chip source?

[Force Fed Mopar]

Some burners don't do a good job burning the UV erase chips. Do some research to see if the burner you have or want, works with UV chips.

Yeah I found out my Burn2 won't write a UV chip properly.

[tryingbe]

Yeah I found out my Burn2 won't write a UV chip properly.

The BURN2 can:

WRITE SST 27SF512, ATMEL AT29C256 and 29F040 chips.
READ but NOT WRITE 2732A, 27C128, 27C256 chips (and most other 24/28 pin EPROMs/EEPROMs that can replace one of these chips).
With a F2A adapter, it can WRITE our F3 EECIV/EECV chip modules.
With a F2E adapter, READ factory Ford ECMs.
with a HDR1 adapter, READ factory GM TPI ECMs that would use a G1 chip adapter .

As you can see, it is designed to comprehensively work with our products but it is NOT a general purpose EPROM programmer. If you require programming chips outside these specifications, you probably should look at another product.

http://support.moates.net/burn2/

[chromguy]

Yeah I found out my Burn2 won't write a UV chip properly.

This is why I purchased a TL866 burner as it will burn tons of different chips.
purchase
https://www.ebay.ca/itm/High-Speed-T...item21027d13da for $37 USD
another $6 if you want the special adapters for other chips
Review
https://youtu.be/FLG03f_ua5g Dave is fussy and if he like its it is quite good!