Results 1 to 10 of 10

Thread: Looking for a 6 pocket plug body

  1. #1
    Supporting Member II Turbo Mopar Contributor jeff1234's Avatar
    Join Date
    Mar 2006
    Location
    Albany Wisconsin
    Posts
    1,006

    Looking for a 6 pocket plug body

    Hello all, I am looking for the 6 pocket male plug that is attached to the firewall harness for a 1985 Charger. I made a diagnostic port extention into my passenger compartment using the same female plug body found on the diagnostic wiring and wired it straight through into the interior. I want the male so I can plug my FTDI cable into the diagnostic plug without breaking off the fine wires in the FTDI. The plug I am looking for is the one that plugs into the fuel injector harness on the intake. Im thinking that the 86 and 87 would likely be the same. If you dont have the plug separate I would be willing to take the harness entire.
    Thanks,
    jeff1234
    The only substitute for cubic inches is cubic dollars, how fast can you afford to go?

  2. #2
    The moderately moderate moderator Turbo Mopar Staff
    Join Date
    Dec 2006
    Location
    Akron, Ohio
    Posts
    6,870

    Re: Looking for a 6 pocket plug body

    This what you are looking for?

    Click image for larger version. 

Name:	IMG_20170806_135037504.jpg 
Views:	108 
Size:	1.66 MB 
ID:	61298Click image for larger version. 

Name:	IMG_20170806_135045860.jpg 
Views:	85 
Size:	1.43 MB 
ID:	61299
    Bryan
    86 GLHS #161, 2016 Impala
    SDAC National Member, SDAC Buckeye Chapter Member

    A man has got to know his limitations.....

  3. #3
    Supporting Member II Turbo Mopar Contributor jeff1234's Avatar
    Join Date
    Mar 2006
    Location
    Albany Wisconsin
    Posts
    1,006

    Re: Looking for a 6 pocket plug body

    Unfortunately no, the 6 pocket I'm looking for would be l shaped. As in el.
    The only substitute for cubic inches is cubic dollars, how fast can you afford to go?

  4. #4
    Garrett booster
    Join Date
    Jun 2016
    Location
    Janesville, WI
    Posts
    177

    Re: Looking for a 6 pocket plug body

    This?

    Click image for larger version. 

Name:	CAM00586.jpg 
Views:	88 
Size:	2.05 MB 
ID:	61309


    EDIT: Nevermind, you said male. Sorry.

  5. #5
    Supporting Member II Turbo Mopar Contributor jeff1234's Avatar
    Join Date
    Mar 2006
    Location
    Albany Wisconsin
    Posts
    1,006

    Re: Looking for a 6 pocket plug body

    It's helpful for people to see that, because the opposite mate is what I need. thank you.
    The only substitute for cubic inches is cubic dollars, how fast can you afford to go?

  6. #6
    The moderately moderate moderator Turbo Mopar Staff
    Join Date
    Dec 2006
    Location
    Akron, Ohio
    Posts
    6,870

    Re: Looking for a 6 pocket plug body

    This one then.
    Click image for larger version. 

Name:	IMG_20170806_213106722.jpg 
Views:	115 
Size:	1.11 MB 
ID:	61310
    Bryan
    86 GLHS #161, 2016 Impala
    SDAC National Member, SDAC Buckeye Chapter Member

    A man has got to know his limitations.....

  7. #7
    Supporting Member II Turbo Mopar Contributor jeff1234's Avatar
    Join Date
    Mar 2006
    Location
    Albany Wisconsin
    Posts
    1,006

    Re: Looking for a 6 pocket plug body

    That would be the one. Please PM me with cost etc.
    Thanks!
    jeff
    The only substitute for cubic inches is cubic dollars, how fast can you afford to go?

  8. #8
    Supporting Member II Turbo Mopar Contributor DOHCRT's Avatar
    Join Date
    Dec 2005
    Location
    Phoenix, Az
    Posts
    512

    Re: Looking for a 6 pocket plug body

    The AIS TPS connector on the Log TI is the same.


    Vic in Phoenix
    dohcrt@cox.net

    91 Spirit R/T x4
    92 Spirit R/T x2
    89 CSX
    88 CSX-TIII
    84 Rampage TII
    97 Ram (Buzzin Half Dozen)
    69 Dart GT 'Vert

  9. #9
    Supporting Member II Turbo Mopar Contributor jeff1234's Avatar
    Join Date
    Mar 2006
    Location
    Albany Wisconsin
    Posts
    1,006

    Re: Looking for a 6 pocket plug body

    Thanks Vic, I did not realize that because I never look at that plug. It is good to know. Another location on the wiring to look for in the junk yard. This packard 56 connector system is like unobtainium for some items.
    The only substitute for cubic inches is cubic dollars, how fast can you afford to go?

  10. #10
    The moderately moderate moderator Turbo Mopar Staff
    Join Date
    Dec 2006
    Location
    Akron, Ohio
    Posts
    6,870

    Re: Looking for a 6 pocket plug body

    It is on it way Jeff. Should see it Thurs.
    Bryan
    86 GLHS #161, 2016 Impala
    SDAC National Member, SDAC Buckeye Chapter Member

    A man has got to know his limitations.....

Similar Threads

  1. Electronics Wanted: L-body TBI pump/sending unit plug
    By 83scamp in forum Parts Wanted
    Replies: 1
    Last Post: 02-25-2017, 08:04 PM
  2. Setting up Com Port on USB Pocket Programmer
    By bfarroo in forum EFI Tuning
    Replies: 1
    Last Post: 10-17-2011, 07:28 PM
  3. Where to get body plug for spare tire well
    By tehdrizzle in forum Interior, Exterior and Chassis Modifications
    Replies: 10
    Last Post: 03-07-2011, 12:19 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •