Lets see the how-tos that everyone has regarding their FMICs. It was a doozie for me to find really good info about putting a spearco in the front of an omni.
Here is how I did it...
www.omniglht.com/spearco.html
Lets see the how-tos that everyone has regarding their FMICs. It was a doozie for me to find really good info about putting a spearco in the front of an omni.
Here is how I did it...
www.omniglht.com/spearco.html
Well you cant see everything to well but this les you see most of the plumbing. I have 2 U bends I cut in half and then 3 feet of silicone hose and 12 tbolt clamps. FMIC is an 20x12x3 core with evo endtanks. You can see the intercooler behind the bumper.
The AA body has a hole on the drivers side I opened up a little bit, and I created a hold on the passenger side. I had to move the computer to make room for the ecu.
I also had to remove material from the headlight brackets to fit the pipe between the headlight and the bumper supports. I got lucky and it fit!!!!!
Kevin Isenberg EVERYTHING is for sale!
Cordes, I've got those same exact pins on my SC, I never noticed that before. Also, if you ever need tubing for piping/exhaust projects, etc... there is a diesel supply store right behind the concrete plant on the W side of the bridge in downtown. Take Diversion street down there and driev around back, cool guys for everything turbo related. Or Parker, that's a company over by crooks and 59 that has silicone hoses, t bolts, etc etc.
Aaron Miller
I put a nice FMIC on my Shelby Z...it looks awesome right through the mouth of the car. I attched it right onto the bumper (not the bumper cover).
how can i get my pics up here from cardomain?
Last edited by turbomopar87; 02-01-2006 at 01:18 AM.
Right click on the picture. Copy the URL. In your reply box, click on the yellow rectangle. A box will pop up asking for the URL. Paste it there.Originally Posted by turbomopar87
Kevin Isenberg EVERYTHING is for sale!
Here is mine sitting in there, install is not done yet, it does fit nicley thou.
Originally Posted by Ondonti
thats preeeeeeeeetty
got any more pics?
gone to the track yet?
http://www.cardomain.com/ride/249196Originally Posted by WOP'R
13.987@101.89 granny shiftin cause it was my first and only complete run.
Here is a pic of Albert Pinheiro's rampage which keeps the A/C. Uses an SRT-4 cooler in the bumper with a shortened rad and condensor the intercooler pipe runs under the rad
.
And Peter Szenkowski's GLH
Dean Stillie
87 Shelby Z 2.4 Turbo 9.06@146.05
82 Rampage 2.4 Turbo 10.14@138.02
srt-4 in my 88 shadow
http://putfile.com/pic.php?pic=11/30618111541.jpg&s=x11
Dear lord I hope you never have to go up a steep driveway.Originally Posted by shadow88
the only pic availible right now more soon, 31x8x3
Last edited by Turbo Joe; 03-12-2007 at 08:00 PM.
Turbo Joe
----------------------- 87 CSX #175 TIII powered, MegaSquirt3 Pro Ultimate, GTX3076R, Turbo Joe header, Lengel intake, Menegon ported head, the list goes on
Here are some pics of Mark's FMIC.
Ralph Scott
93 Daytona Iroc R/T
www.pbase.com/rmscott
Tow Vehicle/Daily Driver:
02 Dakota Quad Cab 4x4
http://www.pbase.com/rmscott/ralphs_dakota_quad_cab
Swaping this out for a Spearco This Summer...
KYLE very nice glht.
is that Jim's (from Mass.) old car? if not it's a dead ringer, her's Jim's car in Oct of 2005:
Marcus Thanks for the compliment. Still not as clean as a Glhs i know of lol. I dont think that its Jim's Car. This car was originally from Florida....
"....I dont think that its Jim's Car...."
well then we have two super nice glht's that are nearly identical. nice. what are the odds of the color and wheels being exact? guess good ideas are contagious.
so are you in Florida? what are the specs on your car?
Tell us more about the car while we're waiting for the pictures.Originally Posted by Turbo Joe
Kevin Isenberg EVERYTHING is for sale!