Results 1 to 15 of 15

Thread: Parting out 94' TBI shadow

  1. #1
    Garrett booster
    Join Date
    Jun 2016
    Location
    Janesville, WI
    Posts
    177

    Parting out 94' TBI shadow

    Date: 22nd April 2017
    Username: lightbulb010
    Full Name: Joseph
    City, State, Zip: Janesville, WI, 53545
    Contact: PM here
    Price: Make an offer
    Description: Parting out my 94' TBI Shadow. The car is badly rusted and most of the body is unusable. The front fenders look okay. I will take them off to check and take photos if someone shows interest and wants to pay to ship them or pick them up locally. Local pickup only for the engine but I'll ship the head. The transmission, spindles, shifter, and clutch pedal are already gone as well as the door panels and some other interior parts. This is a sunroof car. If you want the sunroof I can take it out to get a shipping quote. Not trying to make a lot of money. Just don't want to waste good parts. Let me know if you need something and I'll see if I have it/post pics. I want to get rid of this car soon.

  2. #2
    Garrett booster
    Join Date
    Nov 2010
    Location
    Wisconsin
    Posts
    63

    Re: Parting out 94' TBI shadow

    2 or 4 door? I need a passenger door for a 2 door. It's for the race car, just need something that isn't all smashed up or completely rusted out. I'm local enough to pick up

    Sent from my XT1585 using Tapatalk

  3. #3
    Garrett booster
    Join Date
    Jun 2016
    Location
    Janesville, WI
    Posts
    177

    Re: Parting out 94' TBI shadow

    It's a 2 door. The door bottom has holes in it. From the outside it looks ok except for the terrible paint job.
    Here are some pics



    I can take some better pics of the door bottoms later today when it's darker. My camera doesn't like bright light so I had to get close. The grey primer is actuall sprayed on over top of the factory paint. No sanding they just spray bombed the whole car.
    Last edited by lightbulb010; 04-25-2017 at 05:57 PM.

  4. #4
    Garrett booster
    Join Date
    Jun 2016
    Location
    Janesville, WI
    Posts
    177

    Re: Parting out 94' TBI shadow

    Couple more pics of the rust holes in the door.

    http://i1294.photobucket.com/albums/...psmykszqsx.jpg

  5. #5
    Garrett booster
    Join Date
    Jun 2016
    Location
    Janesville, WI
    Posts
    177

    Re: Parting out 94' TBI shadow

    Last call. Just got a letter from the city. This car is going to the scrapyard this week.

  6. #6
    Super Moderator Turbo Mopar Staff 135sohc's Avatar
    Join Date
    Aug 2008
    Location
    SoMd
    Posts
    6,178

    Re: Parting out 94' TBI shadow

    power mirrors or tilt column ?
    1994 Shadow Sedan. 2.2 N/A, A568 400,000 miles. "the science experiment"
    1987 Shelby CSX #418. Long term rebuild and restore ?

  7. #7
    turbo addict Dodge Aries K's Avatar
    Join Date
    Jan 2006
    Location
    Machesney Park, IL
    Posts
    1,808

    Re: Parting out 94' TBI shadow

    Was it a 2.2L or 2.5L? I'm interested in the cylinder head, possibly the whole engine depending on the price. I'm pretty close, maybe 30 minutes away.

  8. #8
    Garrett booster
    Join Date
    Jun 2016
    Location
    Janesville, WI
    Posts
    177

    Re: Parting out 94' TBI shadow

    No power mirrors or tilt column sorry.

    I think it's a 2.5 but TBH I've never actually checked. I would like $20 for the head or $50 for the whole engine. I'm keeping the power steering pump and the alternator. The A/C compressor was missing when I got it. I don't have a hoist over here at the moment so if you want the whole motor you'll either have to bring one or we can try to drop it out from the bottom. Just let me know.

  9. #9
    turbo addict Dodge Aries K's Avatar
    Join Date
    Jan 2006
    Location
    Machesney Park, IL
    Posts
    1,808

    Re: Parting out 94' TBI shadow

    The 8th digit of the car's vin would tell. D for a 2.2 and K for a 2.5.

    I'll definitely take the cylinder head either way though. It still has the manifolds attached to it, right?

  10. #10
    Garrett booster
    Join Date
    Jun 2016
    Location
    Janesville, WI
    Posts
    177

    Re: Parting out 94' TBI shadow

    8th digit is k. It has the big boxy oil pan not the one with the lump. Yes the manifolds are still there. You can have those too if you want them.

  11. #11
    turbo addict Dodge Aries K's Avatar
    Join Date
    Jan 2006
    Location
    Machesney Park, IL
    Posts
    1,808

    Re: Parting out 94' TBI shadow

    K? Okay it's a 2.5L then. I might want the whole engine but transporting it (and moving it) is always a chore. I will take the head and manifolds though, be nice to port and polish everything the best I can and then I'll put it on my Shadow over the winter so that way it's not rolling with it's original head gasket anymore haha. When is a good time to head up your way?

  12. #12
    Garrett booster
    Join Date
    Jun 2016
    Location
    Janesville, WI
    Posts
    177

    Re: Parting out 94' TBI shadow

    You can come up this weekend if you want.

  13. #13
    turbo addict Dodge Aries K's Avatar
    Join Date
    Jan 2006
    Location
    Machesney Park, IL
    Posts
    1,808

    Re: Parting out 94' TBI shadow

    Gotta work tomorrow all day but Monday I should be able to.

  14. #14
    Garrett booster
    Join Date
    Jun 2016
    Location
    Janesville, WI
    Posts
    177

    Re: Parting out 94' TBI shadow

    Car is gone. I have some leftover parts still but most of the good stuff has either been sold or I am saving it for my personal "collection".

    Some parts I still have include:
    shortblock 121k miles
    Almost brand new gas tank(car came with a new tank in the back seat. I installed it and put 5 gal. of gas in it. It came painted black)
    Engine bay harness with some things cut off(if you need a certain connector I will cut it off for you)
    sunroof glass all related mounting hardware and weatherstrip.
    instrument cluster big gas gauge version(I also have another P-body cluster with tach that is missing pieces)
    Box which I believe to be the airbag controller
    Airbag sensors
    battery tray
    radiator which is in good condition but appears to be an auto parts store replacement(super skinny)
    Track bar (has some rust on the ends)
    distributor with cap, HEP, and cover (one of the screws for the cover is broken off in the housing but may be removable with vice-grips)
    Used water pump
    Flywheel covers
    sun visors
    wiper motor, wiper linkage, and wiper spindles
    drivers side outside door handle(black plastic one)
    headlight switch with rare non-melted connector
    SBEC 5-speed TBI 2.5l
    5-speed brake pedal

    Dodge Aries K: I still have the head and manifolds. I will save them for you. If you decide you don't want them, let me know.

  15. #15
    turbo addict Dodge Aries K's Avatar
    Join Date
    Jan 2006
    Location
    Machesney Park, IL
    Posts
    1,808

    Re: Parting out 94' TBI shadow

    I appreciate you holding them for me. I ended up getting sick as hell all week so I've been pretty much in bed.

Similar Threads

  1. General Parting out 88 shadow ES.
    By rx2mazda in forum Parts For Sale
    Replies: 42
    Last Post: 11-20-2010, 07:46 PM
  2. General Parting out 90 Shadow T-1
    By forcedfedmopar in forum Parts For Sale
    Replies: 35
    Last Post: 10-31-2009, 07:52 PM
  3. General PARTING: 91 shadow es T1 5 spd 2 dr.
    By glht_omni in forum Parts For Sale
    Replies: 26
    Last Post: 09-22-2008, 09:50 PM
  4. Parting 93 shadow
    By W.P._Turbocars in forum Parts For Sale
    Replies: 16
    Last Post: 01-10-2007, 01:57 AM
  5. Parting out 90 shadow ES
    By Black Shelby Z in forum Parts For Sale
    Replies: 0
    Last Post: 11-20-2006, 12:32 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •