What are you guys using to refinish the metal part of the Shelby wheels. One that I have is really worn on the edges and I'd like to class it up a bit before putting it into my Lancer.
IMG_2704 by Brian Cordes, on Flickr
What are you guys using to refinish the metal part of the Shelby wheels. One that I have is really worn on the edges and I'd like to class it up a bit before putting it into my Lancer.
IMG_2704 by Brian Cordes, on Flickr
SEM Trim Black
https://www.summitracing.com/parts/s...FdK6wAodI5sBjw
Thanks a ton. I sprang for it from Amazon due to my ongoing grudge against Dave at Summit. I'll do a video on this and report back when I have it in the car.
Will it also match the black that is on the door handles on my Lancer ?
Here is the finished product. I think it turned out pretty well. It's not perfect, but it's really nice considering how bad it was when I got it.
IMG_4152 by Brian Cordes, on Flickr
IMG_4155 by Brian Cordes, on Flickr
Looks nice. Did you do the "Wood" part too?
All I did to that was clean the gunk off of it very well. I was amazed at how well it cleaned up.