So I did a bunch of searching and all I can find is that the Logic Module's made in late 86 and all of 87 are supposed to have the components to run the 4 wire AIS motor but I cannot find if there is anything in the programming/calibration that needs to be changed or if it is just supposed to be a plug and play thing after you re-wire the 2 extra wires for it. If anyone has done this before your input would be greatly appreciated.
I wired mine up and plugged it in but am still running the factory calibration and the car idles at about 1700 rpm and if I plug and unplug the ais motor nothing changes