Originally Posted by
lengel
I really don't see you selling enough of these to make it worth your while, but I may be wrong I often am. I made four TIII intakes a few years ago, had trouble selling those for $800 and that even included the -10 fuel rail. Now the low quantity didn't really didn't matter to me, since the reason for making them was to make one for my car, so I really only sold three of them.
2 major issues I ran into are. It will be hard to machine a TIII intake efficiently and still retain the factory A/C compressor. My car is more of a drag car so this did consern me, and maybe that had some effect on the low interest when I made them. 2nd issue is a very short runner length due to the plenum hitting the hood. You may be able to overcome this by making a different shaped plenum, or smaller diameter plenum simaller to the Lonewolf intake. L body's are the tightest, so if you can fit it in a L body it should fit in anything else.
Good luck with the project
Adam
Sent from my XT1254 using Tapatalk