I have a set of the BC coilover kits from Rich for my Daytona. Have I seen that some of you have used a SRT4 or PT Cruiser spindle and use their brakes? I plan on using a 89 k-frame for my car.
I have a set of the BC coilover kits from Rich for my Daytona. Have I seen that some of you have used a SRT4 or PT Cruiser spindle and use their brakes? I plan on using a 89 k-frame for my car.
dodgez did a writeup about swapping neon struts and pt spindles into an l-body on boostedmopar.com.
i think they found that the PT and SRT brakes and knuckles were the same.
http://boostedmopar.com/forums/showt...es-on-a-L-body
Originally Posted by turbovanman
Tnx, I heard about the minivan tie rods. Didn't see anything about the PT spindles. If the spindles are the same I presume SRT4 brakes>PT GT brakes>PT Touring turbo. And are the caliper brackets different?
im not totally sure on the details.
id cross reference parts on rockauto and if they come back with the same part number, then they are the same.
im pretty sure PT calipers and srt calipers are the same.
Brian
Originally Posted by turbovanman
I will give that a go, tnx for the input.
no prob
Originally Posted by turbovanman