Mystery Valves.

[moparman76_69]

I'm just looking for someone to confirm these part numbers for me

P4529824 and P4529825 - Stock size backcut S/S swirl head valves?

P4349145 - +1mm G head intake.

P4876670 - G head big exhaust valves, needs oversize seat.

[4 l-bodies]

P4349145 - +1mm G head intake.
These are 2 piece valves like stockers, but +1mm. Not back cut. Nothing very fancy.

P4876670 - G head big exhaust valves, needs oversize seat.
These appear to be made in Argentina, or at least the ones I have are. 1 square tip groove, not multi-groove. Stainless, tulip, swirl polished. Appear to be pretty nice valve.
Todd


I can confirm these, but not top two #'s.
Todd

[moparman76_69]

P4349145 - +1mm G head intake.
These are 2 piece valves like stockers, but +1mm. Not back cut. Nothing very fancy.

P4876670 - G head big exhaust valves, needs oversize seat.
These appear to be made in Argentina, or at least the ones I have are. 1 square tip groove, not multi-groove. Stainless, tulip, swirl polished. Appear to be pretty nice valve.
Todd


I can confirm these, but not top two #'s.
Todd

So will I need new keepers to run the exhaust valves? My spring compressor broke last time I used it so I planned on having the machine shop install everything after cutting the seats.

[2.216VTurbo]

I have a set of +1 G head valves, I'll have to dig them out to confirm but I think the EX valves are multi groove so they made them both ways then. Their new in the plastic but it's little cellophane bags so I don't think I have part numbers for them.