Results 1 to 4 of 4

Thread: Mother Mopar

  1. #1
    Mitsu booster
    Join Date
    May 2016
    Location
    osoyoos,B.C.
    Posts
    44

    Mother Mopar

    ,I've just run into a big problem,I'm putting a 2.5 in my glhs and found out the crank hubs are different and the crank snout has different diameter.
    Iwas hoHping to swap hubs so I could use the four bolt pulley to drive the alt.p steering and AC.If anyone knows an answer help would be greatly appreciated.Thanks

  2. #2
    Rhymes with tortoise. Turbo Mopar Staff cordes's Avatar
    Join Date
    Dec 2005
    Location
    Tuscola, IL
    Posts
    21,441

    Re: Mother Mopar

    Are you trying to use an under drive pulley you had from the non-common block 2.2? Why not just use the pulley off of the 2.5?

  3. #3
    Mitsu booster
    Join Date
    May 2016
    Location
    osoyoos,B.C.
    Posts
    44

    Re: Mother Mopar

    Because the 2.5 has 1 ribbed pulley and 1 v groove pulley the2.2 has 1 ribbed pulley and 2 vgroove pulleys

  4. #4
    Rhymes with tortoise. Turbo Mopar Staff cordes's Avatar
    Join Date
    Dec 2005
    Location
    Tuscola, IL
    Posts
    21,441

    Re: Mother Mopar

    The 2.5 pulley you have is from a non-AC car. It should be very easy to track one down. Cheap too. Of course, if you aren't going to run AC, you don't need the outer V belt slot.

Similar Threads

  1. Dear mother of god, now what..
    By trannybuster in forum Turbos & Intercoolers!
    Replies: 19
    Last Post: 06-09-2011, 10:30 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •