Location, HEMET, California 92544
I have a 90 daytona 2.5 that is sitting in my driveway.
I've sold a ton of parts off it, but it still has lots of valuable parts, they are just slow sellers I guess.
I cant keep this car in my driveway anymore.
The front spindles have sold so it would have to be dragged up onto a flatbed. The wheels are just sitting there.
Since the transmission and some internal engine parts have sold, none of the pick-a-part places will take it.
Even tow yards I've called end up flaking and not coming to get it for free.
I did put it on craigslist for free and got alot of responses, but I'm worried about getting the paperwork right. I dont want this car coming back to bite me later with "well you are still the owner blah blah so when it didnt pass smog/ran into that school bus blah blah its your fault". All the paperwork I do have is legit and clear..I have the title and registration (california non-op) and its all in my name.
If I were in PA I bet a dozen TD'ers would come grab it in an instant, but for whatever reason they are few and far between in CA.
Can someone help me figure out a way to get this in the hands of a TD'r so it doesnt go to waste? Its free at this point.
I'm pretty sure most of the parts on this list are still in it, plus more:
4 snowflake wheels
4 tires with lots of tread left..I think they are 5 years old
2 additional 15" wheels from caravan with slicks mounted (they are 8 years old though..not cracked but probably not safe to use)
Struts/shocks/front springs are all only a few years old with 10k to 30k miles
A/C was working so all those components are still good
Good Alternator! Was running great and replaced only a few thousand miles ago. No squeaks. More info and pics available.
G-head: Cleaned and surfaced but not pressure tested. Comes with valves, springs and retainers.
G-body ball joints NIB! Set of 2, Gp Sorenson brand
Tachometer Remote mount w/pickup, like new condition, equus brand, 8krpm, perfect for modified vehicles with no tach!
Distributor From a 2.5 T1 common block. I believe its original chrysler.
Includes cheap wires,cap, and rotor, which are all usable still. No hep.
Passenger power/heated mirror from 90 daytona! Have the usual cosmetic damage from being outside 26 years but are otherwise functional!
Two good front cloth seats, One has small hole in headrest where stiching came apart but its very minor and easily fixed.
Full dashboard, center console, instrument cluster, switch cowl, etc..
Instrument cluster from 90 daytona everything works last I remember
clockspring for airbag steering wheel!!!
armrest , only minor marks /dents on it, locking tab broken
pulled Speedometer unit from 90 daytona odometer doesnt work but speedometer does
drivers center console carpet good condition, missing one velcro, others have been-reglued
passenger center console carpet broken cardboard, fixable
rear center console carpet very good condition, missing one velcro
gear shift knob typical suncracks but otherwise good condition
AC louvers good condition
center console lower cover has broken mounting ear
small storage cup for center console
rubber mat for center console
e-brake cover for center console sun cracks on rubber but structurally sound
ashtray
shift boot good condition
lower center console wiring harness
Dome lights from 90 daytona gray interior good condition, no broken tabs(single lens one comes with harness, not pictured)
stock exhaust manifold no cracks, has egt port (I have TWO, one has no egt port, tell me which you want)
starter, not original, good shape but has heat shield melted to solenoid
stock 1 piece intake manifold
rear seatbelts good condition
sunroof interior gasket
hood latch fascia flap
hood latch pieces
interior rear black trim pieces
upper timing belt cover
valve cover w/oil cap (was originally gray, I gave it a black paint job)
security lug nut set (fits 15" wheels on 90 daytona)
spare tire mounting assy
home made aluminum oil drainback tube
FWDP oil drainback tube
large pulley
wheel well trim
misc rubber isolators (radiator?)
original ground strap (probably psngr engine mount)
electric radiator fan (some blades have minor chips but otherwise works great)
saginaw steering pump w/bracket and lines
triangular bracket
46mm throttle body w/bracket
original starter heat shield (fiberglass is orig, but metal is probably not)
new 3-way PCV valve grommet
home made turbo brace bracket (very strong, fits like stock I think)
g-valve (typical TD home made quality, works)
Missing parts:
Car had minor read-end collision which I dont think damaged chassis. All sheet metal from rear up is great.
Rear interior is gone
Pistons/rods are gone
Front knuckles/calipers are gone.
Hood has holes cut in it for hood pins
Windshield is cracked
Lots of parts already sold..so if you want something specific make sure to ask.