Results 1 to 7 of 7

Thread: Who could make a Custom Made Flywheel?

  1. #1
    Mitsu booster
    Join Date
    May 2016
    Location
    Seattle area
    Posts
    18

    Who could make a Custom Made Flywheel?

    I am trying to find a reputable place that could make me a Manual Transmission Flywheel for a 2.4L Turbo motor that would be the same thickness as the Jeep Liberty Dual Mass flywheel but would accept the 2.2L Turbo II Clutch. That is the only piece to the puzzle that I need to bring together a PT Cruiser Turbo 2.4L motor in front of the Jeep Liberty Bellhousing on an AX15 5spd using a 2.2L TII clutch. That Dual Mass Flywheel is too weak I fear to handle the 200HP let alone if I increased the boost. So I am looking to have a custom flywheel made but don't seem to find any good reputable outfits while doing some Google research? Any suggestions??

    The reason I am using an AX15 is I have one already and I want to see what it will handle. I hear lots of things about the tranny but want to find out on my own if it will hold up or not. My own R&D if you will...



    Thanks, Shrk2thgrl

  2. #2
    Garrett booster
    Join Date
    Aug 2007
    Location
    va
    Posts
    93

    Re: Who could make a Custom Made Flywheel?

    How much more thickness do you need? Can you use a shim between the flywheel and crank?

  3. #3
    Mitsu booster
    Join Date
    May 2016
    Location
    Seattle area
    Posts
    18

    Re: Who could make a Custom Made Flywheel?

    Quote Originally Posted by cdavis View Post
    How much more thickness do you need? Can you use a shim between the flywheel and crank?
    Also the Liberty Flywheel is larger in diameter than the 2.2. So even if a spacer were to be used it would be in the bell housing to far as to far away from the starter wheel. I think just making a custom flywheel is the only way to make this happen??

  4. #4
    Supporting Member Turbo Mopar Contributor 2.216VTurbo's Avatar
    Join Date
    Dec 2005
    Location
    SoCal the OC
    Posts
    6,675

    Re: Who could make a Custom Made Flywheel?

    Check this thread from the way back machine...

    http://www.turbo-mopar.com/forums/sh...ight=dual+disc

    AJ (no More Alan) 84 Rampage RT TIII/568 Quaife 87 GLHS dealer optioned Red 16V Masi/568/Quaife
    90 Masi 16V White/Ginger/Black
    89 TC Masi 16V Red/Ginger/Black
    86 GLHS #110 RoadRace Built 89 CSX-VNT Recaro Car
    89 Turbo Mini 'Woody' 85 GLHT 'RedBox'
    2014 Explorer DD'r 3.5Twin Turbo Ecoboost AWD and 500HP
    My profile page has over 20,000 views, I'm somebody LOL

  5. #5
    Supporting Member Turbo Mopar Contributor
    Join Date
    Feb 2006
    Location
    Edmonton AB
    Posts
    2,082

    Re: Who could make a Custom Made Flywheel?

    Fidanza will also do custom flywheels.

  6. #6
    turbo addict
    Join Date
    Jul 2006
    Location
    Prosser WA
    Posts
    2,165

    Re: Who could make a Custom Made Flywheel?

    Could you use a auto flexplate and a neon or SRT4 modular type clutch? If that would work it may be your cheapest option. Tons of clutch options too.

  7. #7
    turbo addict Turbo Mopar Contributor
    Join Date
    Dec 2005
    Location
    Seattle
    Posts
    7,063

    Re: Who could make a Custom Made Flywheel?

    Seattle hmm?
    Brent GREAT DEPRESSION RACING 1992 Duster 3.0T The Junkyard - MS II, OEM 10:1 -[I] Old - 11.5@125 22psi $90 [U]Stock[/U] 3.0 Junk Motor - 1 bar MAP [/I] 1994 Spirit 3.0T - 11.5@120 20 psi - Daily :eyebrows: Holset He351 -FT600 - 393whp 457ft/lb @18psi 1994 Spirit 3.0T a670 - He341, stock fuel, BEGI. Wife's into kid's project. 1990 Lebaron Coupe 2.2 TI/II non IC, a413 1990 Spirit 3.0 E.S. 41TE -- 1993 Spirit 3.0 E.S. 41TE -- 1994 Duster 3.0 A543 1981 Starlet KP61 Potential driver -- 1981 Starlet KP61 Parts -- 1983 Starlet KP61 Drag 2005 Durango Hemi Limited -- 1998 Dodge 12v 47re. AFC mods, No plate, Mack plug, Boost elbow -- 2011 Dodge 6.7 G56

Similar Threads

  1. TIII Custom Adjustable Gears I made today
    By Directconnection in forum 16v Factory Engines
    Replies: 28
    Last Post: 12-01-2010, 10:39 PM
  2. Can anyone make custom LM for me?`
    By Big_P in forum Electrical & Fuel System
    Replies: 12
    Last Post: 11-02-2010, 10:59 PM
  3. Custom intake made from steel??
    By 1FastCSX289 in forum Engine - Block, Piston, Heads, Intakes
    Replies: 40
    Last Post: 03-02-2010, 09:35 PM
  4. anyone made a custom intake yet?
    By rib256 in forum 3.0L V6 Turbo Engines!
    Replies: 16
    Last Post: 11-16-2009, 07:43 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •