Johnny, Put me down for one.
Johnny, Put me down for one.
Great...thats at least 8!!
Great stuff for great cars! Poly engine mounts and bushings at: http://www.polybushings.com
Looks plausible the square style could have been trimmed to fit. However, the square glass is thicker measuring approx .265", and the round style is .205" making for a noticeable difference in weight. Additionally, they have different DOT markings, square glass reads "ASI M 60" while the round style reads "ASI M 50".
Also, the polycarbonate piece I got from Mike Wah matches the round style, and measures .250" in thickness, and weighs less than half of the thinner round style glass.
Sent from my XT1650 using Tapatalk
I also have one, do not "need" to do this buy, as I have it for a spare. ALSO I have Clearplex on my glass one so hopefully it lasts.Also, the polycarbonate piece I got from Mike Wah
BUT this seems like the right thing to do....group buy continue!!!
Great stuff for great cars! Poly engine mounts and bushings at: http://www.polybushings.com
I was told that at least during design of the series 2 they took series 1 windshields and cut the corners. My point was just that otherwise the shape etc was the same. I have no idea regarding thickness etc.
Sent from my SM-G920P using Tapatalk
On a positive note, I started moving into the new building. Progress can start!
Sent from my XT1650 using Tapatalk
I don't need one per se either, but mine has a pock mark just under the wiper and it seems that I've had at least 2 decent impacts while driving on the hwy ( ones that left white dust on the windshield after the hit )
Having one would make me worry less about driving it, and if it helps us get closer to having another one on the road, I'll do what I can.
Yea screw it, I'm in for one if you guys do this. I got spares but they are probably delaminating as I type. Plus lighter and stronger.
MinivanRider
I should probably get in on this as well, what kind of timeframe are we looking at Johnny? Also, when would you need funds?
Sent from my XT1650 using Tapatalk
WE need a windshield sample, you have one (square)...can we use it as a sample? Can you send it to the mfg ?
I'll talk to them on time frames......
Great stuff for great cars! Poly engine mounts and bushings at: http://www.polybushings.com
Do you have a round one already?
Sent from my SM-G920P using Tapatalk
How is the durability when using wipers?
I have installed Clearplex on my glass one, and would also put it on this polyc one.
You need to teat both the same. Keep it clean, don't turn the wipers on untill it's clean.
use something they supply that is like rainx to keep it easy to clean
Great stuff for great cars! Poly engine mounts and bushings at: http://www.polybushings.com
Johnny,
Might as well get one also.
I have an extra original glass round corner from Dan when Mosler was in business.
I also have an extra Polycarbonate from Mike Wah.
If I remember correctly he picked up so many polycarbonate windshields on a trip to Mosler the pile was huge.…about 20 I think.
He probably has them now unless they got sold with the Blue car and came back to Fla.…Andy?