I'm starting to tear into my 90 2.5 turbo 1 motor and am looking for some suggestions on a mild build, this motor is staying with my 90 es Daytona as a drag project with a a413 transmission. So far I have +40 injectors, a large fmic, Garret turbo with 2.5 inch swing valve, afpr and a Bosch 044 fuel pump. Getting a stage 5 fwdp 3 bar cal and looking for some advice on what else to help performance out. Motors coming apart and head studs are going in, balance shafts are coming out and some manifold and head porting are going to happen but not planning on boring or replacing pistons yet, not trying to make over 300 hp but would like to be somewhere in the mid 200's, any advice is appreciated, thanks Brandon.