Page 1 of 2 12 LastLast
Results 1 to 20 of 29

Thread: Shelby Lancer Parts

  1. #1
    Hybrid booster
    Join Date
    May 2009
    Location
    Triangle, VA
    Posts
    362

    Shelby Lancer Parts

    My son and I picked up a Shelby Lancer (cloth 5 speed car) today for parts. Its mostly complete (minus drive train), but in VERY rough shape. Front core support is ripped in two, broken welds at the frame where the core support attaches. Dang near every body panel is dented in some way. cracked windshield, rusted trunk lid. Floor pans are pretty good though, but a very small spot where the e-brake cable goes thru.

    Shipping is at the buyers expense. I use US mail priority for most, parcel for bigger stuff.
    Payment = paypal (please add the fee), check or money order

    Parts spoken for:
    CS Steering wheel from this car, but have another CS wheel (6 of 10 shape)
    Passenger head light bucket
    shifter and shifter cables, center console
    Front bumper cover

    Parts missing:
    Entire drive train
    Horn button missing

    Parts damaged:
    front air dam missing 1 foot section out of drivers side corner

    I'll list a few parts here, but prefer that you either PM me for specific parts and I'll give you a price or post in this thread if that's OK with the mods.

    Shelby trunk medallion = $75.00
    TII Wire Harness = $125.00 (gotta check condition first)
    CSS center cap (no medallions) = $35.00 each
    CSS rim = $40.00 each
    Side skirts = $100.00 pair
    truck spoiler = $40.00
    rear lower spoiler = $75.00 (nice condition)
    grill = $60.00 (nice condition, no broken tabs)

    Click image for larger version. 

Name:	P9020781.JPG 
Views:	189 
Size:	124.3 KB 
ID:	46741Click image for larger version. 

Name:	P9020779.JPG 
Views:	169 
Size:	136.0 KB 
ID:	46740Click image for larger version. 

Name:	P9020782.JPG 
Views:	202 
Size:	143.6 KB 
ID:	46742Click image for larger version. 

Name:	P9020783.JPG 
Views:	181 
Size:	138.2 KB 
ID:	46743Click image for larger version. 

Name:	P9020784.JPG 
Views:	157 
Size:	145.6 KB 
ID:	46744Click image for larger version. 

Name:	P9020785.JPG 
Views:	173 
Size:	149.2 KB 
ID:	46745Click image for larger version. 

Name:	P9020786.JPG 
Views:	167 
Size:	143.9 KB 
ID:	46746

  2. #2
    Hybrid booster
    Join Date
    Mar 2006
    Location
    Central VA
    Posts
    687

    Re: Shelby Lancer Parts

    I need the little reflector/bezel from the drivers side door with all the tabs intact. Shipped to 23834.

  3. #3
    Garrett booster
    Join Date
    Feb 2006
    Location
    Fayette City, PA
    Posts
    140

    Re: Shelby Lancer Parts

    Pm'd you about parts. Thanks

  4. #4
    Hybrid booster
    Join Date
    May 2009
    Location
    Triangle, VA
    Posts
    362

    Re: Shelby Lancer Parts

    PM'd all back.

  5. #5
    Garrett booster
    Join Date
    Sep 2009
    Location
    Cleveland, OH
    Posts
    142

    Re: Shelby Lancer Parts

    CSS center cap (no medallions) = $35.00 each Willing to pay $100 for all center caps (with no medalions) if NO broken tabs. PLMK.

  6. #6

    Re: Shelby Lancer Parts

    What number SL is that ?

  7. #7
    Hybrid booster
    Join Date
    May 2009
    Location
    Triangle, VA
    Posts
    362

    Re: Shelby Lancer Parts

    I think its car # 196. Is Bill still updating the registry? This SL may be to far gone to save

    Mikeywk
    I sent you a pm back.

  8. #8
    Mitsu booster
    Join Date
    Nov 2013
    Location
    Pennsylvania
    Posts
    5

    Re: Shelby Lancer Parts

    I'm looking for a nice rear bumper valance.The part that wraps around the bottom of the bumper to the lower 1/4's.Do you have?Thanks Vinny

  9. #9
    Hybrid booster
    Join Date
    May 2009
    Location
    Triangle, VA
    Posts
    362

    Re: Shelby Lancer Parts

    Vinny, I believe this car has a good one. LMK get pics soon send me a pm

  10. #10
    Mitsu booster
    Join Date
    Nov 2013
    Location
    Pennsylvania
    Posts
    5

    Re: Shelby Lancer Parts

    Steve,Not sure what a "pm" is.So, here's my e-mail vinnysinteriors@comcast.net I'm also looking for the fog light switch w/wiring and relay if possible.My car does'nt have that option.

  11. #11
    Hybrid booster
    Join Date
    Dec 2010
    Location
    Pennsylvania
    Posts
    650

    Re: Shelby Lancer Parts

    I'm looking for one of these in good shape

  12. #12
    Hybrid booster
    Join Date
    May 2009
    Location
    Triangle, VA
    Posts
    362

    Re: Shelby Lancer Parts

    give me until the weekend to check on the condition of these. You want the entire sill plate and not just the emblem correct?

  13. #13
    Hybrid booster
    Join Date
    Dec 2010
    Location
    Pennsylvania
    Posts
    650

    Re: Shelby Lancer Parts

    just a emblem in good shape, its actually for my csx so i wont need the whole sill plate

  14. #14

    Re: Shelby Lancer Parts

    4467460 is the scuff plate Shelby nameplate. I have 14 of these NOS. 55.00 each plus shipping. www.arizonaparts.com

  15. #15

    Re: Shelby Lancer Parts

    Do you have a throttle cable for the Shelby Lancer for sale ?

  16. #16
    Mitsu booster
    Join Date
    May 2012
    Location
    Albany
    Posts
    5

    Re: Shelby Lancer Parts

    Steve i'm still looking for these parts:

    -Driver Side, Rear Seat Release Fold Down Lever 4317467

    -Driver Seat Trim, around Power Seat Controls

    -Turn Signal Lever

  17. #17
    Hybrid booster
    Join Date
    Sep 2008
    Location
    Winnipeg, MB, Canada
    Posts
    612

    Re: Shelby Lancer Parts

    Hey Steve; what shape are the shift cables in?

  18. #18
    Supporting Member Turbo Mopar Contributor glhs0075's Avatar
    Join Date
    May 2009
    Location
    Alberta
    Posts
    579

    Re: Shelby Lancer Parts

    Steve, I'm interested in the fog light switch and the rear door top molding. The plastic strip that clips to the top of the door opening and holds the headliner up.

    Stephen: 1987 GLHS #0075, 1965 Polara 880 convertible
    SDAC National- proud member
    Western Canada SDAC- proud member
    www.wc-tm.com
    "I am not a number. I am a free man!" Number 6

  19. #19
    Hybrid booster
    Join Date
    May 2013
    Location
    detroit
    Posts
    264

    Re: Shelby Lancer Parts

    I would like the front grill, I sent a message last week with no reply.

  20. #20

    Re: Shelby Lancer Parts

    4370269 grille Shelby Lancer. I have 10 of these NOS

    mkolner14@hotmail.com

    www.arizonaparts.com
    Last edited by martin kolner; 12-19-2013 at 10:16 AM.

Page 1 of 2 12 LastLast

Similar Threads

  1. Replies: 24
    Last Post: 11-25-2013, 11:52 PM
  2. General 1987 Shelby Lancer - Shelby Signature parts
    By rhenry01 in forum Parts For Sale
    Replies: 15
    Last Post: 11-17-2013, 12:16 AM
  3. General Shelby Lancer parts
    By ludwig340 in forum Parts For Sale
    Replies: 21
    Last Post: 02-24-2009, 02:29 AM
  4. Electronics Shelby Lancer Fog Lights, Shelby Lancer/Lancer/Lebaron GTS 12 Button Navigator
    By 1983Rampage in forum Parts For Sale
    Replies: 8
    Last Post: 02-10-2009, 09:51 PM
  5. WTB: lancer Shelby/Shelby Lancer parts
    By boostboy in forum Parts Wanted
    Replies: 0
    Last Post: 08-14-2006, 04:30 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •