flywheel/ pressure plate bolts

[Fox]

not looking to spend the money on arp right now, anyone have some stock hardware laying around ?

[wheming]

They have the torque converter bolts in the HELP! section in the parts stores, i think its a Dorman item. They weren't expensive, and they were new.
Or you just mean you need the bolts for the crank?

[acannell]

I have the bolts that hold the flywheel to the crank from a 90 2.5 turbo common block would that work? PM me if you want them

[DevoBuzz]

FYI...6 bolt flywheel uses different bolts then 8 bolt flywheel. The thread pitch is different.

[black86glhs]

FYI...6 bolt flywheel uses different bolts then 8 bolt flywheel. The thread pitch is different.

And they are a ----- to find....trust me.

[mopar-tech]

And they are a ----- to find....trust me.

How many you want? Might have a bin full of them.

[Fox]

sorry should have been more specific for an 8 bolt crank, the bolts to hold the flywheel to the crank for manual transmission (auto are shorter) and also the pressure plate bolts but those arent anything special really just grade 10.5 bolts so can probably just use some others

[Charger R/T]

The parts pdf show 2.2, 2.5, and the 3.0 all use the same part number for the manual trans flywheel to crank bolt. 6501197. If the original poster gets his I would be interested in 8 of them if someone has a bin full.
Tim

[tryingbe]

The parts pdf show 2.2, 2.5, and the 3.0 all use the same part number for the manual trans flywheel to crank bolt. 6501197. If the original poster gets his I would be interested in 8 of them if someone has a bin full.
Tim

$2 a piece.

http://arizonaparts.com/

[Charger R/T]

thanks