Results 1 to 4 of 4

Thread: need help please

  1. #1
    Mitsu booster
    Join Date
    Feb 2016
    Location
    Mich.
    Posts
    20

    need help please

    I have a 1987 glhs I get a water pump and timing belt on the car car ran Fantastic Four Thirty miles and then just all the sudden lost power and then the car started having erratic Idol where would I go in 1800
    and then it would run at 1500 and then the car would stall I rechecked the timing that is dead on did not jump a tooth and I have no codes I am just stumped on this there is no vacuum leaks at all I did put in a new pic up and I had and that did not affect anything in the distributor fuel pressure is at 55 with the vacuum line off

  2. #2
    turbo addict
    Join Date
    Dec 2005
    Location
    Mesa, AZ
    Posts
    7,351

    Re: need help please

    Does the crank/intermediate shaft and cam shaft all have their woodruff key in them?

  3. #3
    See me ride out of the sunset... Turbo Mopar Staff BadAssPerformance's Avatar
    Join Date
    Dec 2005
    Location
    Chicagoland!
    Posts
    27,688

    Re: need help please

    the timing belt can jump the intermediate shaft and oil pump can jump too when you set timing marks make sure rotor points at #1

    - - - Updated - - -

    codes?

    JT
    SDAC Director
    SDAC-Chicago President
    JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
    87 Shelby Z - 10.50@141.66mph
    87 CSX #751 Clone - 12.88@102.88mph

    www.badassperformance.com
    Check out Turbo-Mopar Times!
    Submit your 1/4 mile times HERE!!

    Support SDAC! Join Today!
    "I'm not some pro athlete with a bajillion dollars, I'm just an every man"
    Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.

  4. #4
    Mitsu booster
    Join Date
    Feb 2016
    Location
    Mich.
    Posts
    20

    Re: need help please

    I will pull it apart in the morning and see and there is no codes.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •