Date: 06th July 2016
Username: tryingbe
Full Name: Harry Lui
City, State, Zip: Mesa, AZ 85204
Contact: tryingbe at yahoo.com
Clearing out my stroage! All parts are OBO.
Fastest contact is tryingbe at yahoo.com !!
NEW IN BOX Delphi 17113742 75lbs injectors. These are low impedance, 2.4 ohm injectors. $150 + shipping
SOLD
Setup to replace the TII airbox and add BOV at the same time, you'll need your own air filter
$50 + shipping
Adjustable round tooth cam gear
$80 + shipping
PT lifters
$65 + shipping
Two set of 5 new in box ARP wheel long studs for Turbo Dodge or Neon.
12mm x 1.5
2.450" long
$50 + shipping.
Brand NEW Dynomax 17220 3 inch straight thru, center in, center out.
$40 + shipping
Bottom dash cover,
All three locks are there
$5 + shipping
BOSCH BOV 0280142110 with 60mm pipe
$30 + shipping
Two PCV oil catch can
$15 + shipping each
One with 1/2 inch ports, the other 5/8 inch ports.
Shorten FRONT bumper support for Omni. It will move the front bumper closer to the body.
$30 + shipping
BOSCH starters,
$10 + shipping for both.
Poor man heavy duty L body axles
A pair of dynasty axles, one is cut for the LSD. You'll need your own intermediate shaft to use with this. They should work in a L body, after you recenter the engine, for A555/A520/A523/A568/A413
SOLD
More info are in here
http://www.turbo-mopar.com/forums/sh...l=1#post952105
Refurbished Turbonetics T04E 54 trim compressor housing and compressor wheel. You'll need to get a T04E backplate.
$80 + shipping.