Results 1 to 9 of 9

Thread: Performance parts, 75lbs injectors, BOV, ADJ cam pulley, BOV, muffler, oil catch can,

  1. #1
    turbo addict
    Join Date
    Dec 2005
    Location
    Mesa, AZ
    Posts
    7,351

    Performance parts, 75lbs injectors, BOV, ADJ cam pulley, BOV, muffler, oil catch can,

    Date: 06th July 2016
    Username: tryingbe
    Full Name: Harry Lui
    City, State, Zip: Mesa, AZ 85204
    Contact: tryingbe at yahoo.com


    Clearing out my stroage! All parts are OBO.
    Fastest contact is tryingbe at yahoo.com !!

    NEW IN BOX Delphi 17113742 75lbs injectors. These are low impedance, 2.4 ohm injectors. $150 + shipping
    SOLD

    Setup to replace the TII airbox and add BOV at the same time, you'll need your own air filter
    $50 + shipping


    Adjustable round tooth cam gear
    $80 + shipping


    PT lifters
    $65 + shipping


    Two set of 5 new in box ARP wheel long studs for Turbo Dodge or Neon.
    12mm x 1.5
    2.450" long
    $50 + shipping.




    Brand NEW Dynomax 17220 3 inch straight thru, center in, center out.
    $40 + shipping







    Bottom dash cover,
    All three locks are there
    $5 + shipping


    BOSCH BOV 0280142110 with 60mm pipe

    $30 + shipping


    Two PCV oil catch can
    $15 + shipping each

    One with 1/2 inch ports, the other 5/8 inch ports.


    Shorten FRONT bumper support for Omni. It will move the front bumper closer to the body.
    $30 + shipping


    BOSCH starters,
    $10 + shipping for both.



    Poor man heavy duty L body axles
    A pair of dynasty axles, one is cut for the LSD. You'll need your own intermediate shaft to use with this. They should work in a L body, after you recenter the engine, for A555/A520/A523/A568/A413
    SOLD

    More info are in here
    http://www.turbo-mopar.com/forums/sh...l=1#post952105





    Refurbished Turbonetics T04E 54 trim compressor housing and compressor wheel. You'll need to get a T04E backplate.
    $80 + shipping.



    Last edited by tryingbe; 07-10-2016 at 01:29 AM.

  2. #2
    Supporting Member Turbo Mopar Contributor 2.216VTurbo's Avatar
    Join Date
    Dec 2005
    Location
    SoCal the OC
    Posts
    6,675

    Re: Performance parts, 75lbs injectors, BOV, ADJ cam pulley, BOV, muffler, oil catch

    PM on the talon BOV and 75lb inj

    AJ (no More Alan) 84 Rampage RT TIII/568 Quaife 87 GLHS dealer optioned Red 16V Masi/568/Quaife
    90 Masi 16V White/Ginger/Black
    89 TC Masi 16V Red/Ginger/Black
    86 GLHS #110 RoadRace Built 89 CSX-VNT Recaro Car
    89 Turbo Mini 'Woody' 85 GLHT 'RedBox'
    2014 Explorer DD'r 3.5Twin Turbo Ecoboost AWD and 500HP
    My profile page has over 20,000 views, I'm somebody LOL

  3. #3
    boostaholic
    Join Date
    Sep 2007
    Location
    Colorado Springs Colorado
    Posts
    1,005

    Re: Performance parts, 75lbs injectors, BOV, ADJ cam pulley, BOV, muffler, oil catch

    how much for the muffler and wheel studs shipped to 80911, 719-963-9208

  4. #4
    Supporting Member Turbo Mopar Contributor 2.216VTurbo's Avatar
    Join Date
    Dec 2005
    Location
    SoCal the OC
    Posts
    6,675

    Re: Performance parts, 75lbs injectors, BOV, ADJ cam pulley, BOV, muffler, oil catch

    So there were 0 views and 0 responses when I clicked on this for sale add by chance. Immediately I replied and sent a PM to Harry. His response to me was that only the BOV was left of the three items I asked for in the PM. The injectors were my primary interest as I have 3 cars that use 72-75's. I don't think there is an actual forum rule that says sell to the fist responder offering asking price but it's still poor form for sure to complete the sale any other way. I have bought a handful of items from him over the years so he knows I'm a verified buyer...

    I sent this PM to Harry's response to me


    "Common curtesy is to sell the items to the first valid offer offering to pay the asking price, since I saw your thread when it had 0 views and 0 responses, that would have been me right? Not cool Harry. Im not interested in the BOV on it's own."

    AJ (no More Alan) 84 Rampage RT TIII/568 Quaife 87 GLHS dealer optioned Red 16V Masi/568/Quaife
    90 Masi 16V White/Ginger/Black
    89 TC Masi 16V Red/Ginger/Black
    86 GLHS #110 RoadRace Built 89 CSX-VNT Recaro Car
    89 Turbo Mini 'Woody' 85 GLHT 'RedBox'
    2014 Explorer DD'r 3.5Twin Turbo Ecoboost AWD and 500HP
    My profile page has over 20,000 views, I'm somebody LOL

  5. #5
    turbo addict
    Join Date
    Dec 2005
    Location
    Mesa, AZ
    Posts
    7,351

    Re: Performance parts, 75lbs injectors, BOV, ADJ cam pulley, BOV, muffler, oil catch

    Since Alan Jones was a blockhead to me, I had him on my ignore list. You don't see the person's post or PM when ignored.

    Since he replied to my thread, I thought I give him the common courtesy of letting him know the injectors are sold, on the other forum, no less. This is how he react by trashing the my thread.


    Back to ignore list, Alan Jones goes.



    YES! Ignored.
    Last edited by tryingbe; 07-07-2016 at 12:19 PM.

  6. #6
    Supporting Member Turbo Mopar Contributor 2.216VTurbo's Avatar
    Join Date
    Dec 2005
    Location
    SoCal the OC
    Posts
    6,675

    Re: Performance parts, 75lbs injectors, BOV, ADJ cam pulley, BOV, muffler, oil catch

    Well, I guess that explains why you don't respond to my PM's I've certainly been called worse this than block head

    AJ (no More Alan) 84 Rampage RT TIII/568 Quaife 87 GLHS dealer optioned Red 16V Masi/568/Quaife
    90 Masi 16V White/Ginger/Black
    89 TC Masi 16V Red/Ginger/Black
    86 GLHS #110 RoadRace Built 89 CSX-VNT Recaro Car
    89 Turbo Mini 'Woody' 85 GLHT 'RedBox'
    2014 Explorer DD'r 3.5Twin Turbo Ecoboost AWD and 500HP
    My profile page has over 20,000 views, I'm somebody LOL

  7. #7

    Re: Performance parts, 75lbs injectors, BOV, ADJ cam pulley, BOV, muffler, oil catch

    Sorry, are the axles sold? If not, are these for anything OTHER than the 525? Says for a Dynasty, so assuming not the 525, although I have no idea what went in the Dynastys.
    [SIZE="3"] [B]Jon Trotter[/B][/SIZE] [B]1985[/B] Dodge Shelby Charger, Currently decommissioned [B]1987[/B] Shelby GLHS, #937 [B]1987[/B] Shelby Lancer, #628 [QUOTE=Reeves;587010]I can be ready. Please send pics of wife. _____DodgeZ add comments here______[/QUOTE]

  8. #8
    turbo addict
    Join Date
    Dec 2005
    Location
    Mesa, AZ
    Posts
    7,351

    Re: Performance parts, 75lbs injectors, BOV, ADJ cam pulley, BOV, muffler, oil catch

    Quote Originally Posted by minigts View Post
    Sorry, are the axles sold? If not, are these for anything OTHER than the 525? Says for a Dynasty, so assuming not the 525, although I have no idea what went in the Dynastys.
    Axles not sold. They are for A555/A520/A523/A568/A413
    Last edited by tryingbe; 07-08-2016 at 12:37 AM.

  9. #9
    turbo addict
    Join Date
    Mar 2014
    Location
    Toronto Canada
    Posts
    1,772

    Re: Performance parts, 75lbs injectors, BOV, ADJ cam pulley, BOV, muffler, oil catch

    I believe shadow runs a set of those axles in his charger
    - I've been wondering about the length comparison and the "how well do they fit" myself

Similar Threads

  1. Replies: 5
    Last Post: 03-17-2016, 07:24 AM
  2. Fuel Mopar Performance +40 Injectors
    By kpic in forum Parts For Sale
    Replies: 1
    Last Post: 11-04-2014, 07:50 AM
  3. performance muffler
    By glhs875 in forum Other vehicles
    Replies: 2
    Last Post: 04-21-2011, 06:42 AM
  4. short, quiet muffler, non-performance
    By J&H Ryan in forum Exhaust
    Replies: 0
    Last Post: 07-15-2010, 07:06 PM
  5. General Bare Block, Muffler, Crank Pulley, Silicone Couplings etc
    By Dez in forum Parts For Sale
    Replies: 5
    Last Post: 03-15-2009, 01:55 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •