Results 1 to 10 of 10

Thread: 0.91 transfer gears

  1. #1
    boostaholic
    Join Date
    Sep 2007
    Location
    Colorado Springs Colorado
    Posts
    1,005

    0.91 transfer gears

    what is the going price for these? I haven't seen any for sale for a while, I have a set I will never use...

  2. #2
    turbo addict Turbo Mopar Contributor
    Join Date
    Dec 2005
    Location
    Seattle
    Posts
    7,063

    Re: 0.91 transfer gears

    Someone here tried to sell me a set for 100 and I wanted to pay 80 so i pulled a set for 16 bucks.
    Brent GREAT DEPRESSION RACING 1992 Duster 3.0T The Junkyard - MS II, OEM 10:1 -[I] Old - 11.5@125 22psi $90 [U]Stock[/U] 3.0 Junk Motor - 1 bar MAP [/I] 1994 Spirit 3.0T - 11.5@120 20 psi - Daily :eyebrows: Holset He351 -FT600 - 393whp 457ft/lb @18psi 1994 Spirit 3.0T a670 - He341, stock fuel, BEGI. Wife's into kid's project. 1990 Lebaron Coupe 2.2 TI/II non IC, a413 1990 Spirit 3.0 E.S. 41TE -- 1993 Spirit 3.0 E.S. 41TE -- 1994 Duster 3.0 A543 1981 Starlet KP61 Potential driver -- 1981 Starlet KP61 Parts -- 1983 Starlet KP61 Drag 2005 Durango Hemi Limited -- 1998 Dodge 12v 47re. AFC mods, No plate, Mack plug, Boost elbow -- 2011 Dodge 6.7 G56

  3. #3
    turbo addict
    Join Date
    Dec 2005
    Location
    Woodville Ala.
    Posts
    1,727

    Re: 0.91 transfer gears

    Quote Originally Posted by MILKCARTON View Post
    what is the going price for these? I haven't seen any for sale for a while, I have a set I will never use...
    I have a set as well. Gonna hang on to mine for now. I'm curious what gear combo does your Shadow have?

  4. #4
    boostaholic
    Join Date
    Sep 2007
    Location
    Colorado Springs Colorado
    Posts
    1,005

    Re: 0.91 transfer gears

    I tried these in my shadow and they were too high(26" slicks) so I went back to stock van gearing, 2.86 w/1.06 transfer
    Last edited by MILKCARTON; 07-05-2016 at 08:33 PM.

  5. #5
    boostaholic
    Join Date
    Sep 2007
    Location
    Colorado Springs Colorado
    Posts
    1,005

    Re: 0.91 transfer gears

    Quote Originally Posted by glhs875 View Post
    I have a set as well. Gonna hang on to mine for now. I'm curious what gear combo does your Shadow have?
    I have e been doing some 1/8 mile stuff lately, wanna try something 1.22's...

  6. #6
    turbo addict
    Join Date
    Dec 2005
    Location
    Woodville Ala.
    Posts
    1,727

    Re: 0.91 transfer gears

    Quote Originally Posted by MILKCARTON View Post
    I have e been doing some 1/8 mile stuff lately, wanna try something 1.22's...
    I ran 3.05/1.06 in my GLHS. I think that is what it was. Been awhile! LOL It worked good for the 1/8th for my setup!

  7. #7
    boostaholic
    Join Date
    Sep 2007
    Location
    Colorado Springs Colorado
    Posts
    1,005

    Re: 0.91 transfer gears

    Quote Originally Posted by glhs875 View Post
    I ran 3.05/1.06 in my GLHS. I think that is what it was. Been awhile! LOL It worked good for the 1/8th for my setup!
    Yea but how tall of tire? 23"?

  8. #8
    turbo addict
    Join Date
    Dec 2005
    Location
    Woodville Ala.
    Posts
    1,727

    Re: 0.91 transfer gears

    Quote Originally Posted by MILKCARTON View Post
    Yea but how tall of tire? 23"?
    25" and 26" The 25" was on the GLHS and I ran 26" on a Daytona I had

  9. #9
    turbo addict Turbo Mopar Contributor
    Join Date
    Dec 2005
    Location
    Seattle
    Posts
    7,063

    Re: 0.91 transfer gears

    Planning on traps in 2nd or 3rd for 1/8th? Mighty math powers, activate. I think 1.22 is good for trap speeds on high rpm motors and supposed to be stronger though i don't know why.
    Last edited by Ondonti; 07-18-2016 at 11:33 PM.
    Brent GREAT DEPRESSION RACING 1992 Duster 3.0T The Junkyard - MS II, OEM 10:1 -[I] Old - 11.5@125 22psi $90 [U]Stock[/U] 3.0 Junk Motor - 1 bar MAP [/I] 1994 Spirit 3.0T - 11.5@120 20 psi - Daily :eyebrows: Holset He351 -FT600 - 393whp 457ft/lb @18psi 1994 Spirit 3.0T a670 - He341, stock fuel, BEGI. Wife's into kid's project. 1990 Lebaron Coupe 2.2 TI/II non IC, a413 1990 Spirit 3.0 E.S. 41TE -- 1993 Spirit 3.0 E.S. 41TE -- 1994 Duster 3.0 A543 1981 Starlet KP61 Potential driver -- 1981 Starlet KP61 Parts -- 1983 Starlet KP61 Drag 2005 Durango Hemi Limited -- 1998 Dodge 12v 47re. AFC mods, No plate, Mack plug, Boost elbow -- 2011 Dodge 6.7 G56

  10. #10
    turbo addict
    Join Date
    Dec 2005
    Location
    Woodville Ala.
    Posts
    1,727

    Re: 0.91 transfer gears

    Quote Originally Posted by Ondonti View Post
    Planning on traps in 2nd or 3rd for 1/8th? Might math powers, activate. I think 1.22 is good for trap speeds on high rpm motors and supposed to be stronger though i don't know why.
    I was in 3rd gear in the 1/8th with my combo but I still had enough left to run the quarter!

Similar Threads

  1. Transmission WTB: .91 transfer gears
    By cordes in forum Parts Wanted
    Replies: 4
    Last Post: 11-02-2012, 08:15 PM
  2. .91 Transfer Gears
    By mr glenn in forum Transmission
    Replies: 17
    Last Post: 01-08-2012, 04:09 PM
  3. Transmission WTB-1.22 transfer gears!
    By turbovanmanČ in forum Parts Wanted
    Replies: 0
    Last Post: 03-11-2011, 02:10 PM
  4. Transmission 1.22 transfer gears
    By turbovanpilot in forum Parts For Sale
    Replies: 10
    Last Post: 04-28-2008, 08:33 PM
  5. Transmission WTB: .91 transfer gears
    By Reeves in forum Parts Wanted
    Replies: 4
    Last Post: 04-14-2008, 06:04 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •