So I recently hooked up the 5 volt output from my AEM wideband to the SMEC's oxygen sensor input. I turned on the WB2NB in my calibration and scaled the WidebandToAFRTransferFuction table to what the AEM installation guide said to. When I hook up mpscan to the car though, the airfuel ratio on the wideband does not match what mpscan shows. Is there anything else that I need to do to make it work? I did some datalogging today and tried to upload the .csv file into mptune and it will not load. Anyone have any guidance? Thanks.
By the way the can is an 88 Chrysler New Yorker with a 2.4 swap running a SMEC.