87 CSX wire diagram needed.

[CSX153]

from sensors to smec, I'll also take whatever else you guys have for that car as well. thanks

[cordes]

The 87 cars had an LM and a PM. What problem are you having, or what are you trying to do? I have an 87 service manual, but the TII Daytona would be the closest thing to the CSX since it's TII.

In the meantime, here's a link to minimopar for the basic LM and PM wires.

http://minimopar.net/ecu/lm-1987-t2.html

http://minimopar.net/ecu/pm-1985-turbo.html

[CSX153]

code 52. changed the o2, the next thing I want to do is buzz the wires from the connector to where ever they go, pm right?

[cordes]

Did the CSX get the one wire sensor? If so, that should be pretty easy to troubleshoot.

- - - Updated - - -

code 52. changed the o2, the next thing I want to do is buzz the wires from the connector to where ever they go, pm right?

The sensor wire goes to the LM. If it's a three wire sensor then there is a ground and a wire off of the Z1 circuit which I believe comes out of the PM.

[CSX153]

three wire

[CSX153]

*edit!!*. it's an 88 CSXT. sorry

[cordes]

Check minimopar, but I'm pretty sure nothing much changes except the logic board in the SMEC is where the O2 signal wire goes to. The power board should run everything else.