Page 1 of 2 12 LastLast
Results 1 to 20 of 32

Thread: 87 Shelby CSX and 91 Daytona Shelby

  1. #1
    Heroes never die, they just reload! Turbo Mopar Staff Frank's Avatar
    Join Date
    Dec 2005
    Location
    California, MD
    Posts
    9,183

    87 Shelby CSX and 91 Daytona Shelby

    Date: 27th May 2016
    Username: Frank
    Full Name: Frank Katzenberger
    City, State, Zip: 20657
    Contact: by PM for email or phone
    Selling or Wanted Price: $750 each

    Description: I am selling both of cars. Here are descriptions and links to the pictures for each.

    87 Shelby CSX #418
    $750 as is
    140k miles appoximately
    https://goo.gl/photos/Ch6ENAeawfTtRWMDA
    The good

    • Aftermarket stereo and 10" subwoofer,
    • Original wheels plus the currently installed pizza wheels,
    • Mostly refreshed A/C components
    • Full reworked and upgraded front suspension (includes PolyBushings) and large brakes [EDIT] along with later model k-frame and control arms
    • Restored rear breaks,
    • Running engine with 140k miles, but has not been started for 18 months,
    • +20 injectors and upgraded FWDP fuel rail w/ AFPR,
    • 3-bar map and custom cal
    • Integraded wideband w/ gauge and cal is configured for it.

    The bad

    • The wideband controller is suspect, so since the cal was running near perfectly, no wideband is connected to the computer. I parked it after that happened.
    • The interior is falling apart (88 interior), the seat rail is broken,
    • Has sat for 1.5 years as I have had no time to restore the interior either.
    • Crack in the front frame member and some floor pan rot.
    • Window scrapers are now nonexistent and the rubber trim is deteriorating around the window.
    • It would be a tough restoration, but as A LOT of goodies for a good parts car. I am including a barely assembled DIY WBO2 kit.


    91 Daytona Shelby
    $750 as is
    125k miles approximately
    https://goo.gl/photos/YtyF9H2rmrsaZXx29
    The good
    • Koni, Eibach, CS Racing track bar, CS Racing strut brace, CS Racing rear brace
    • Full 3" exhaust w/ Magnaflow
    • All wheels pictured
    • 4 probe aircraft EGT gauge
    • Powerstroke cooler
    • RFL blowoff valve
    • AFPR
    • Fuel pressure and AF gauges
    • Includes pedals, shifter, and center console if desired to convert to manual transmission

    The bad
    • Dings and dents along with the fender crease shown
    • No engine
    Last edited by Frank; 05-27-2016 at 01:54 PM.
    Frank Katzenberger
    Squirrel Performance - Home of the best turbo calc!!!
    http://www.squirrelpf.com


    91 Daytona Shelby - It is getting there

    87 Shelby CSX #418 - Near stock is a good thing!

    94 Bronco 302 XLT - Shorty Headers, 3" exhaust, cold air intake, & Soft top



    "... to get the best out of it, you have to go beyond the line. Where bravery becomes insanity. Shall I turn into this hairpin bend at a 100mph? Why not!"



    Visit the new Knowledge Center today!

    Check out the one and only Shelby Dodge Registry!

  2. #2
    Supporting Member Turbo Mopar Contributor mopar-tech's Avatar
    Join Date
    Dec 2005
    Location
    Oakdale CT
    Posts
    2,419

    Re: 87 Shelby CSX and 91 Daytona Shelby

    Damn man I'm tempted, that way I could say I owned FOUR '87 CSX at the same time! LOL


    Working on clearing the decks.

  3. #3
    Heroes never die, they just reload! Turbo Mopar Staff Frank's Avatar
    Join Date
    Dec 2005
    Location
    California, MD
    Posts
    9,183

    Re: 87 Shelby CSX and 91 Daytona Shelby

    Quote Originally Posted by mopar-tech View Post
    Damn man I'm tempted, that way I could say I owned FOUR '87 CSX at the same time! LOL
    At the very least it would be a great donor car for all of the suspension/brakes.
    Frank Katzenberger
    Squirrel Performance - Home of the best turbo calc!!!
    http://www.squirrelpf.com


    91 Daytona Shelby - It is getting there

    87 Shelby CSX #418 - Near stock is a good thing!

    94 Bronco 302 XLT - Shorty Headers, 3" exhaust, cold air intake, & Soft top



    "... to get the best out of it, you have to go beyond the line. Where bravery becomes insanity. Shall I turn into this hairpin bend at a 100mph? Why not!"



    Visit the new Knowledge Center today!

    Check out the one and only Shelby Dodge Registry!

  4. #4
    turbo addict Pat's Avatar
    Join Date
    Dec 2005
    Location
    Rockville, MD
    Posts
    3,801

    Re: 87 Shelby CSX and 91 Daytona Shelby

    My old CSX...I have a serious soft spot for that car!

  5. #5
    Slugmobile & MeanMini Caretaker Turbo Mopar Contributor wheming's Avatar
    Join Date
    Nov 2010
    Location
    Raleigh Area, NC
    Posts
    4,809

    Re: 87 Shelby CSX and 91 Daytona Shelby

    Quote Originally Posted by Pat View Post
    My old CSX...I have a serious soft spot for that car!
    Sometimes they find their way back home...
    Wayne H.

    '91 Dodge Spirit ES 2.5L turbo 5spd
    '05 PT GT 2.4T HO autostick (RIP)
    '89 Plymouth Acclaim 2.5L turbo auto, "Slugmobile" yes, THE Slugmobile!
    '89 Dodge Caravan SE 2.5L turbo auto, "Mean Mini" yes, Gus' Mean Mini! (Current best 11.699 @ 114.43 mph! - Oct 15th, 2022 Cecil County Dragway, MD)
    MeanMini dragracing videos: https://www.youtube.com/playlist?lis...URZLB1RxGYF6vw
    and other cars, trucks and motorcycles
    https://www.youtube.com/user/SlugmobileMeanMini

  6. #6
    Heroes never die, they just reload! Turbo Mopar Staff Frank's Avatar
    Join Date
    Dec 2005
    Location
    California, MD
    Posts
    9,183

    Re: 87 Shelby CSX and 91 Daytona Shelby

    Pat,
    I will work on getting you picks in the next two days for the CSX items you asked about.
    Frank Katzenberger
    Squirrel Performance - Home of the best turbo calc!!!
    http://www.squirrelpf.com


    91 Daytona Shelby - It is getting there

    87 Shelby CSX #418 - Near stock is a good thing!

    94 Bronco 302 XLT - Shorty Headers, 3" exhaust, cold air intake, & Soft top



    "... to get the best out of it, you have to go beyond the line. Where bravery becomes insanity. Shall I turn into this hairpin bend at a 100mph? Why not!"



    Visit the new Knowledge Center today!

    Check out the one and only Shelby Dodge Registry!

  7. #7
    Supporting Member Turbo Mopar Contributor mopar-tech's Avatar
    Join Date
    Dec 2005
    Location
    Oakdale CT
    Posts
    2,419

    Re: 87 Shelby CSX and 91 Daytona Shelby

    Quote Originally Posted by Frank View Post
    At the very least it would be a great donor car for all of the suspension/brakes.
    I'd rather save it to be honest, I try not to part out anything of rarity unless its too far gone now.


    Working on clearing the decks.

  8. #8
    Heroes never die, they just reload! Turbo Mopar Staff Frank's Avatar
    Join Date
    Dec 2005
    Location
    California, MD
    Posts
    9,183

    Re: 87 Shelby CSX and 91 Daytona Shelby

    Quote Originally Posted by mopar-tech View Post
    I'd rather save it to be honest, I try not to part out anything of rarity unless its too far gone now.
    It would make me happy to see someone restore it.
    Frank Katzenberger
    Squirrel Performance - Home of the best turbo calc!!!
    http://www.squirrelpf.com


    91 Daytona Shelby - It is getting there

    87 Shelby CSX #418 - Near stock is a good thing!

    94 Bronco 302 XLT - Shorty Headers, 3" exhaust, cold air intake, & Soft top



    "... to get the best out of it, you have to go beyond the line. Where bravery becomes insanity. Shall I turn into this hairpin bend at a 100mph? Why not!"



    Visit the new Knowledge Center today!

    Check out the one and only Shelby Dodge Registry!

  9. #9
    Supporting Member Turbo Mopar Contributor supercrackerbox's Avatar
    Join Date
    Dec 2005
    Location
    Firth, Nebraska
    Posts
    5,022

    Re: 87 Shelby CSX and 91 Daytona Shelby

    PM sent. Wife says I have to.

  10. #10
    Supporting Member Turbo Mopar Contributor
    Join Date
    Feb 2015
    Location
    toronto
    Posts
    1,765

    Re: 87 Shelby CSX and 91 Daytona Shelby

    Quote Originally Posted by supercrackerbox View Post
    PM sent. Wife says I have to.
    Good I hope it works I hate to see it die as a parts car.
    Regards,
    Miles

    DD '87 Sundance T1, SLH with rear disks
    '87 CSX #432 2.5 CB TII, SLH

  11. #11
    Supporting Member Turbo Mopar Contributor supercrackerbox's Avatar
    Join Date
    Dec 2005
    Location
    Firth, Nebraska
    Posts
    5,022

    Re: 87 Shelby CSX and 91 Daytona Shelby

    Quote Originally Posted by chromguy View Post
    Good I hope it works I hate to see it die as a parts car.
    Well if it works out, then it means mine dies as a parts car.

  12. #12
    Supporting Member Turbo Mopar Contributor
    Join Date
    Feb 2015
    Location
    toronto
    Posts
    1,765

    Re: 87 Shelby CSX and 91 Daytona Shelby

    Quote Originally Posted by supercrackerbox View Post
    Well if it works out, then it means mine dies as a parts car.
    Ok it is a wash I guess!!
    Regards,
    Miles

    DD '87 Sundance T1, SLH with rear disks
    '87 CSX #432 2.5 CB TII, SLH

  13. #13
    Heroes never die, they just reload! Turbo Mopar Staff Frank's Avatar
    Join Date
    Dec 2005
    Location
    California, MD
    Posts
    9,183

    Re: 87 Shelby CSX and 91 Daytona Shelby

    I added pictures into both car galleries for folks requesting it.
    Frank Katzenberger
    Squirrel Performance - Home of the best turbo calc!!!
    http://www.squirrelpf.com


    91 Daytona Shelby - It is getting there

    87 Shelby CSX #418 - Near stock is a good thing!

    94 Bronco 302 XLT - Shorty Headers, 3" exhaust, cold air intake, & Soft top



    "... to get the best out of it, you have to go beyond the line. Where bravery becomes insanity. Shall I turn into this hairpin bend at a 100mph? Why not!"



    Visit the new Knowledge Center today!

    Check out the one and only Shelby Dodge Registry!

  14. #14
    Heroes never die, they just reload! Turbo Mopar Staff Frank's Avatar
    Join Date
    Dec 2005
    Location
    California, MD
    Posts
    9,183

    Re: 87 Shelby CSX and 91 Daytona Shelby

    Both cars are still available. Thanks!
    Frank Katzenberger
    Squirrel Performance - Home of the best turbo calc!!!
    http://www.squirrelpf.com


    91 Daytona Shelby - It is getting there

    87 Shelby CSX #418 - Near stock is a good thing!

    94 Bronco 302 XLT - Shorty Headers, 3" exhaust, cold air intake, & Soft top



    "... to get the best out of it, you have to go beyond the line. Where bravery becomes insanity. Shall I turn into this hairpin bend at a 100mph? Why not!"



    Visit the new Knowledge Center today!

    Check out the one and only Shelby Dodge Registry!

  15. #15
    Supporting Member Turbo Mopar Contributor mopar-tech's Avatar
    Join Date
    Dec 2005
    Location
    Oakdale CT
    Posts
    2,419

    Re: 87 Shelby CSX and 91 Daytona Shelby

    Quote Originally Posted by Frank View Post
    Both cars are still available. Thanks!
    Must. Resist. Buying..More... Cars..


    Working on clearing the decks.

  16. #16
    Heroes never die, they just reload! Turbo Mopar Staff Frank's Avatar
    Join Date
    Dec 2005
    Location
    California, MD
    Posts
    9,183

    Re: 87 Shelby CSX and 91 Daytona Shelby

    Quote Originally Posted by mopar-tech View Post
    Must. Resist. Buying..More... Cars..
    Do not resist!
    Frank Katzenberger
    Squirrel Performance - Home of the best turbo calc!!!
    http://www.squirrelpf.com


    91 Daytona Shelby - It is getting there

    87 Shelby CSX #418 - Near stock is a good thing!

    94 Bronco 302 XLT - Shorty Headers, 3" exhaust, cold air intake, & Soft top



    "... to get the best out of it, you have to go beyond the line. Where bravery becomes insanity. Shall I turn into this hairpin bend at a 100mph? Why not!"



    Visit the new Knowledge Center today!

    Check out the one and only Shelby Dodge Registry!

  17. #17
    Heroes never die, they just reload! Turbo Mopar Staff Frank's Avatar
    Join Date
    Dec 2005
    Location
    California, MD
    Posts
    9,183

    Re: 87 Shelby CSX and 91 Daytona Shelby

    Just sold the house, so it would be great if I can get the cars out of here by early July. Thanks!
    Frank Katzenberger
    Squirrel Performance - Home of the best turbo calc!!!
    http://www.squirrelpf.com


    91 Daytona Shelby - It is getting there

    87 Shelby CSX #418 - Near stock is a good thing!

    94 Bronco 302 XLT - Shorty Headers, 3" exhaust, cold air intake, & Soft top



    "... to get the best out of it, you have to go beyond the line. Where bravery becomes insanity. Shall I turn into this hairpin bend at a 100mph? Why not!"



    Visit the new Knowledge Center today!

    Check out the one and only Shelby Dodge Registry!

  18. #18
    Supporting Member Turbo Mopar Contributor mopar-tech's Avatar
    Join Date
    Dec 2005
    Location
    Oakdale CT
    Posts
    2,419

    Re: 87 Shelby CSX and 91 Daytona Shelby

    I asked Faith how she felt about me dragging 2 cars home..


    Working on clearing the decks.

  19. #19
    Heroes never die, they just reload! Turbo Mopar Staff Frank's Avatar
    Join Date
    Dec 2005
    Location
    California, MD
    Posts
    9,183

    Re: 87 Shelby CSX and 91 Daytona Shelby

    Fart in church?
    Frank Katzenberger
    Squirrel Performance - Home of the best turbo calc!!!
    http://www.squirrelpf.com


    91 Daytona Shelby - It is getting there

    87 Shelby CSX #418 - Near stock is a good thing!

    94 Bronco 302 XLT - Shorty Headers, 3" exhaust, cold air intake, & Soft top



    "... to get the best out of it, you have to go beyond the line. Where bravery becomes insanity. Shall I turn into this hairpin bend at a 100mph? Why not!"



    Visit the new Knowledge Center today!

    Check out the one and only Shelby Dodge Registry!

  20. #20
    Supporting Member Turbo Mopar Contributor mopar-tech's Avatar
    Join Date
    Dec 2005
    Location
    Oakdale CT
    Posts
    2,419

    Re: 87 Shelby CSX and 91 Daytona Shelby

    Quote Originally Posted by Frank View Post
    Fart in church?
    Got the eye roll.

    She knows I can make it work but just cleared out three cars and my Dart is still sitting on the lift... CSX is now turning into a time suck this month.


    Working on clearing the decks.

Page 1 of 2 12 LastLast

Similar Threads

  1. Replies: 8
    Last Post: 09-07-2015, 09:03 AM
  2. Replies: 0
    Last Post: 07-14-2013, 11:15 AM
  3. Daytona Shelby "SHELBY" Decal specs..
    By 89ShelbyGuy in forum Interior & Exterior Restoration
    Replies: 18
    Last Post: 09-09-2009, 02:17 PM
  4. Gauge Cluster Question - '90 Daytona Shelby vs. '92 Daytona Iroc R/T
    By DC Turismo in forum Electrical & Fuel System
    Replies: 1
    Last Post: 07-31-2006, 12:58 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •