Results 1 to 2 of 2

Thread: Standard bore Wiseco forged pistons and rods

  1. #1
    The moderately moderate moderator Turbo Mopar Staff
    Join Date
    Dec 2006
    Location
    Akron, Ohio
    Posts
    6,870

    Standard bore Wiseco forged pistons and rods

    Date: 23rd May 2016
    Username: black86glhs
    Full Name: Bryan Leach
    City, State, Zip: Akron, Ohio 44313
    Contact: PM or email (bryan.leach@sbcglobal.net)
    Price: $200.00

    Description: Standard bore Wiseco pistons and rods with ARP bolts. #4 piston is pitted around the top above the compression ring and a quarter sized area on top. See the pictures. Any questions, please ask. At the minimum, you get 3 good pistons w/rods and ARP bolts. Rods are ready to go.
    Story behind these is the block was in my garage when a pipe burst and the cylinders got filled with water. I was out of the house during our renovation for another 2-3 months before I found it. I dried up the water and soaked each cylinder in trans fluid (only because I have a few extra Subaru bottles). That kept the cylinders from getting eaten away. I found that the #4 piston had this crystalline substance around the top. I kept my ice melt in the garage also. A few pieces of the melt must have gotten into that cylinder. Water alone wouldn't eat away at the aluminum but a "chloride" of some sort would. the other three pistons are fine.
    These are 958 rods, BTW. You can get another piston and swap it to the rod.

    Click image for larger version. 

Name:	wiseco1.jpg 
Views:	93 
Size:	1.79 MB 
ID:	58314Click image for larger version. 

Name:	wiseco2.jpg 
Views:	116 
Size:	908.9 KB 
ID:	58315Click image for larger version. 

Name:	wiseco3.jpg 
Views:	108 
Size:	990.7 KB 
ID:	58316Click image for larger version. 

Name:	wiseco4.jpg 
Views:	79 
Size:	895.5 KB 
ID:	58317Click image for larger version. 

Name:	wiseco5.jpg 
Views:	100 
Size:	983.5 KB 
ID:	58318Click image for larger version. 

Name:	wiseco6.jpg 
Views:	98 
Size:	982.8 KB 
ID:	58319Click image for larger version. 

Name:	wiseco7.jpg 
Views:	88 
Size:	971.3 KB 
ID:	58320Click image for larger version. 

Name:	wiseco8.jpg 
Views:	95 
Size:	764.7 KB 
ID:	58321Click image for larger version. 

Name:	wiseco9.jpg 
Views:	82 
Size:	1.10 MB 
ID:	58322
    Last edited by black86glhs; 05-23-2016 at 09:49 PM. Reason: Added great story!
    Bryan
    86 GLHS #161, 2016 Impala
    SDAC National Member, SDAC Buckeye Chapter Member

    A man has got to know his limitations.....

  2. #2
    The moderately moderate moderator Turbo Mopar Staff
    Join Date
    Dec 2006
    Location
    Akron, Ohio
    Posts
    6,870

    Re: Standard bore Wiseco forged pistons and rods

    bump....
    Bryan
    86 GLHS #161, 2016 Impala
    SDAC National Member, SDAC Buckeye Chapter Member

    A man has got to know his limitations.....

Similar Threads

  1. Engine Wanted good used low miles or nib 2.2 standard bore pistons.
    By bgbmxer in forum Parts Wanted
    Replies: 4
    Last Post: 10-25-2014, 08:55 AM
  2. A-B-C-D bore sizes for standard size pistons
    By iTurbo in forum Engine - Block, Piston, Heads, Intakes
    Replies: 1
    Last Post: 02-15-2014, 01:24 PM
  3. Engine 2.5l standard bore pistons
    By audiomaninc in forum Parts Wanted
    Replies: 2
    Last Post: 03-30-2010, 07:15 PM
  4. 2.5 T1 standard bore pistons
    By moparzrule in forum Parts Wanted
    Replies: 18
    Last Post: 10-19-2007, 09:41 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •