Results 1 to 15 of 15

Thread: 1980 Dodge Omni 024 Part Out

  1. #1

    1980 Dodge Omni 024 Part Out

    Date: 14th April 2016
    Username: 1983Rampage
    Full Name: Matthew Beyer
    City, State, Zip: Austin Tx
    Contact: PM Only
    Price: See Below

    Description:

    Just picked up a 1980 Omni 024 that I will be parting out. This car is a 1.7L car with most of the parts still in tack.


    As of right now, there is somebody interested in the transmission, axles, and associated mounts, but most of the interior (Oxblood in color) is for sale minus the steering wheel and assorted 2 door L-body parts.


    List of parts off hand: (all prices plus shipping unless otherwise stated)


    1. Tail Lights (Both Sides) - $50 for the pair


    2. Engine bay harness - $150 (everything included, sensors, alternator harness, and relays)


    3. 1.7L Engine (complete minus mounts with approximately 107,000 miles on it, ran strong when last started) - $250 (will not ship)


    If you want anything else, just ask. My goal is to have everything I would want pulled within the month and the car off to the scrap yard. I will pull anything I think may be worth saving, othrewise it will get crushed.


    And before anybody asks, the car is beyond saving and will be chopped up to be used on my Rampage.

  2. #2
    Supporting Member Turbo Mopar Contributor supercrackerbox's Avatar
    Join Date
    Dec 2005
    Location
    Firth, Nebraska
    Posts
    5,022

    Re: 1980 Dodge Omni 024 Part Out

    Steel or aluminum rear bumper?

  3. #3

    Re: 1980 Dodge Omni 024 Part Out

    When I took a magnet to the bumper support, it did not stick, so I would have to say aluminum.

  4. #4
    Supporting Member II Turbo Mopar Contributor DOHCRT's Avatar
    Join Date
    Dec 2005
    Location
    Phoenix, Az
    Posts
    512

    Re: 1980 Dodge Omni 024 Part Out

    Does it have the front fender vents?


    Vic in Phoenix
    dohcrt@cox.net

    91 Spirit R/T x4
    92 Spirit R/T x2
    89 CSX
    88 CSX-TIII
    84 Rampage TII
    97 Ram (Buzzin Half Dozen)
    69 Dart GT 'Vert

  5. #5

    Re: 1980 Dodge Omni 024 Part Out

    Nope, it is not a 2.2.

  6. #6
    Moderator Turbo Mopar Staff Vigo's Avatar
    Join Date
    Feb 2006
    Location
    San Antonio,TX
    Posts
    10,798

    Re: 1980 Dodge Omni 024 Part Out

    Good pics of the taillights? I might be interested in those too.

    Dont push the red button.You hear me?

  7. #7
    Supporting Member Turbo Mopar Contributor 2.216VTurbo's Avatar
    Join Date
    Dec 2005
    Location
    SoCal the OC
    Posts
    6,675

    Re: 1980 Dodge Omni 024 Part Out

    After doing a power to manual steering rack conversion on two of my L body's I can tell you that those manual parts are getting hard to find. SO if it's got a manual rack, I'd say that's real sellable

    AJ (no More Alan) 84 Rampage RT TIII/568 Quaife 87 GLHS dealer optioned Red 16V Masi/568/Quaife
    90 Masi 16V White/Ginger/Black
    89 TC Masi 16V Red/Ginger/Black
    86 GLHS #110 RoadRace Built 89 CSX-VNT Recaro Car
    89 Turbo Mini 'Woody' 85 GLHT 'RedBox'
    2014 Explorer DD'r 3.5Twin Turbo Ecoboost AWD and 500HP
    My profile page has over 20,000 views, I'm somebody LOL

  8. #8

    Re: 1980 Dodge Omni 024 Part Out

    Yah. I have manual steering in my Rampage and I love it. But this thing had power steering.

    Vigo, I will try and get photos for you and send them off. Hopefully I can have that done tomorrow evening at the latest.

  9. #9

    Re: 1980 Dodge Omni 024 Part Out

    It also has the windshield washer bottle by the fender, which is hard to find. So that will be pulled before scrapping.

  10. #10
    Supporting Member Turbo Mopar Contributor supercrackerbox's Avatar
    Join Date
    Dec 2005
    Location
    Firth, Nebraska
    Posts
    5,022

    Re: 1980 Dodge Omni 024 Part Out

    Quote Originally Posted by 1983Rampage View Post
    When I took a magnet to the bumper support, it did not stick, so I would have to say aluminum.
    If you can get pictures of where the crash bar bolts to the supports, I'd appreciate it. Please send them to my email at supercrackerbox1(at)gmail.com. If the mounting points aren't rotted out I'll take it.

  11. #11

    Re: 1980 Dodge Omni 024 Part Out

    supercrackerbox and Vigo, sent both of you PMs with links for the photos. Supercrackerbox, please let me know if the links don't work, and I could then send you them via email.

  12. #12
    Hybrid booster
    Join Date
    Feb 2006
    Location
    Phoenix Metro, AZ
    Posts
    983

    Re: 1980 Dodge Omni 024 Part Out

    How about the door handles? Few years ago I parted an l body with non pull up handles. Interested if this car has them.

    Thanks

  13. #13

    Re: 1980 Dodge Omni 024 Part Out

    I am planning on keeping the doors from the car since they will be back up in case something happens to my Rampage's doors. If that changes, I will let you know.

  14. #14
    TIIFIIIWII Turbo Mopar Staff DodgeZ's Avatar
    Join Date
    Dec 2005
    Location
    Texas
    Posts
    4,307

    Re: 1980 Dodge Omni 024 Part Out

    how are the floor pans and windshield?
    2022 Viper runs 9s

  15. #15

    Re: 1980 Dodge Omni 024 Part Out

    Floor pans have been spoken for and the windshield cracked while trying to remove. Vigo was here earlier today and saw it initially, but after he left I tried getting it removed and it cracked on me.

Similar Threads

  1. Replies: 6
    Last Post: 07-18-2015, 05:01 PM
  2. For Sale Rare 1980 Dodge Omni 024 DeTomaso Pkg
    By detomaso in forum Cars
    Replies: 13
    Last Post: 02-19-2011, 11:20 AM
  3. General 1985 Dodge Omni GLH-T T2 part out
    By j4278h in forum Parts For Sale
    Replies: 25
    Last Post: 02-24-2010, 09:31 PM
  4. General Parts off of a 1980 Dodge Omni
    By 85boostbox in forum Parts For Sale
    Replies: 9
    Last Post: 10-02-2009, 01:16 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •