Results 1 to 2 of 2

Thread: Rampage drip tray repair

  1. #1
    boostaholic Turbo Mopar Contributor
    Join Date
    Feb 2006
    Location
    Westminster, MD
    Posts
    1,245

    Rampage drip tray repair

    Has anyone welded the seam where the seam sealer dries up and leaks? I just got started cleaning it all out and the front corner of the passenger side is rotten, but the drivers side is fine. I was going to patch and POR-15 the pass. side, then put new seam sealer over it. Drivers side should just need POR-15 and new sealer.

    Thoughts?
    Nick G. 1984 Dodge Rampage

  2. #2
    Supporting Member Turbo Mopar Contributor
    Join Date
    Feb 2015
    Location
    toronto
    Posts
    1,767

    Re: Rampage drip tray repair

    Quote Originally Posted by Nemesismachine View Post
    Has anyone welded the seam where the seam sealer dries up and leaks? I just got started cleaning it all out and the front corner of the passenger side is rotten, but the drivers side is fine. I was going to patch and POR-15 the pass. side, then put new seam sealer over it. Drivers side should just need POR-15 and new sealer.

    Thoughts?

    Interesting this is exactly what I did to stop a leak just below the windsheild on the passanger side 87 P body. It stopped my leak. I did POR-15 over the top of the sealer as well
    Regards,
    Miles

    DD '87 Sundance T1, SLH with rear disks
    '87 CSX #432 2.5 CB TII, SLH

Similar Threads

  1. Interior Rare Black Rampage Black package tray
    By Xtrempickup in forum Parts For Sale
    Replies: 0
    Last Post: 04-01-2015, 04:42 PM
  2. L body drip rail
    By thedon809 in forum Interior & Exterior Restoration
    Replies: 13
    Last Post: 08-24-2013, 09:16 PM
  3. Drip rails on an L-body
    By black86glhs in forum Interior & Exterior Restoration
    Replies: 14
    Last Post: 07-15-2009, 11:27 PM
  4. Door Panel Clips/Drip Moulding clips
    By badandy in forum Interior & Exterior Restoration
    Replies: 9
    Last Post: 06-23-2009, 04:38 PM
  5. Oil Drip
    By dirttrackdemon in forum Engine - Block, Piston, Heads, Intakes
    Replies: 10
    Last Post: 10-15-2006, 11:04 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •