Does such a part exist as a plug and play 3 bar MAP sensor for a T III Spirit R/T?
Does such a part exist as a plug and play 3 bar MAP sensor for a T III Spirit R/T?
No because the connector has keyways in the plastic that are cut in such a way that they won't slide into the common gm 3bar map.
So you either cut and splice 3 whole wires to run the proper connector, or you modify your old one with a razor blade.
Dont push the red button.You hear me?
Additionally, the connector on '92 and newer is a different style.
Thanks for the advice fellas.
A local friend of mine that bought my old red Spirit R/T works at NAPA and he used a 3-bar MAP sensor from the Pontiac Trans Am Turbo. Pretty sure it was '89. I'll ask him if it was PNP.
I have ran the GM TTA map sensor and also the 3-bar offered by MSD Ignition in my 91 R/T. They are the same part, just different suppliers. Still need to spend 5 minutes with a razor blade or exacto knife to get it to fit.
“If the people of the nation understood our banking and monetary system, I believe there would be a revolution before tomorrow morning.” -Henry Ford