Date: 16th March 2016
Username: Sundance 6g72
Full Name: Joe Sirianni
City, State, Zip: Michigan, 49441
Contact: PM HERE or EMAIL joseph.sirianni88@gmail.com
Price: $300
Description: I have a set of cams for the 3.0 and a set of heads that I can sell.
Heads
- 3.3 Beehive Springs (7000rpm+ Capable
- LS1 locks and retainers
- 270 degree cams by 'turbovanman' if i remember correctly
- Valve guides replaced
- Valve stem seals replaced
- Mitsubishi Valve Cover (no oil cap, takes the same cap that you already use)
The heads have less than 20,000 on them.
Full Heads: $450 + shipping
Just Cams $300 I cover shipping
I will not part anything but the cams at this point.
The cams brought significant performance improvements. I went from 100% Duty Cycle at 16psi to 100% DC at only 8PSI after installing the cams. Drastic flow improvements without any head porting.
*note, these images are from build time. Not current. The engine is in my garage with the heads installed.
*stock cam in photo. Cams were added after the rebuild.
idle video for the cams.
https://youtu.be/4lTNfTsM5kw
Reply With Quote
