Page 3 of 3 FirstFirst 123
Results 41 to 48 of 48

Thread: BoostButton - hold on computers and cables

  1. #41
    Visit www.boostbutton.com... Turbo Mopar Contributor ShelGame's Avatar
    Join Date
    Dec 2005
    Location
    Whitmore Lake, Michigan, Unite
    Posts
    9,918

    Re: BoostButton - hold on computers and cables

    Quote Originally Posted by going4speed View Post
    the last we chatted in august you said the SMEC t2 templates needed to be updated for AC. I guess it's fixed now and that is awesome.
    Oh yeah, you're right. I do have the T2 template with AC. I'll double check if it's finished and ready to publish...
    https://db.tt/SV7ONZpQ
    Rob Lloyd
    '89 Daytona C/S

    2.5 T1 Auto
    13.24 @ 100.5mph
    NHRA #3728 AF/S

    boostbutton.com
    tuning wiki

  2. #42
    boostaholic
    Join Date
    Dec 2012
    Location
    Houston
    Posts
    1,265

    Re: BoostButton - hold on computers and cables

    That would be awesome. Thanks Rob.

  3. #43
    boostaholic
    Join Date
    Jan 2006
    Location
    Mather
    Posts
    1,310

    Re: BoostButton - hold on computers and cables

    Glad to hear you're doing better rob. I will be ordering some stuff to tune my car this summer.

  4. #44
    turbo addict Turbo Mopar Contributor
    Join Date
    Dec 2005
    Location
    Seattle
    Posts
    7,063

    Re: BoostButton - hold on computers and cables

    How are things going now? I still can't find my pile of automatic trans SBEC2s but I want to "order"
    Brent GREAT DEPRESSION RACING 1992 Duster 3.0T The Junkyard - MS II, OEM 10:1 -[I] Old - 11.5@125 22psi $90 [U]Stock[/U] 3.0 Junk Motor - 1 bar MAP [/I] 1994 Spirit 3.0T - 11.5@120 20 psi - Daily :eyebrows: Holset He351 -FT600 - 393whp 457ft/lb @18psi 1994 Spirit 3.0T a670 - He341, stock fuel, BEGI. Wife's into kid's project. 1990 Lebaron Coupe 2.2 TI/II non IC, a413 1990 Spirit 3.0 E.S. 41TE -- 1993 Spirit 3.0 E.S. 41TE -- 1994 Duster 3.0 A543 1981 Starlet KP61 Potential driver -- 1981 Starlet KP61 Parts -- 1983 Starlet KP61 Drag 2005 Durango Hemi Limited -- 1998 Dodge 12v 47re. AFC mods, No plate, Mack plug, Boost elbow -- 2011 Dodge 6.7 G56

  5. #45
    Visit www.boostbutton.com... Turbo Mopar Contributor ShelGame's Avatar
    Join Date
    Dec 2005
    Location
    Whitmore Lake, Michigan, Unite
    Posts
    9,918

    Re: BoostButton - hold on computers and cables

    Quote Originally Posted by Ondonti View Post
    How are things going now? I still can't find my pile of automatic trans SBEC2s but I want to "order"
    I'm still not caught up. But, getting there. When did you expect (or want) to get it back?
    https://db.tt/SV7ONZpQ
    Rob Lloyd
    '89 Daytona C/S

    2.5 T1 Auto
    13.24 @ 100.5mph
    NHRA #3728 AF/S

    boostbutton.com
    tuning wiki

  6. #46
    Visit www.boostbutton.com... Turbo Mopar Contributor ShelGame's Avatar
    Join Date
    Dec 2005
    Location
    Whitmore Lake, Michigan, Unite
    Posts
    9,918

    Re: BoostButton - hold on computers and cables

    I got a few of my old computer orders completed and am feeling pretty good soldering. So, I put that flashable SBEC and SMEC back up in the store; also the calibrated LM's. I don't have many cores on hand, but I'll be collecting more in the near future.

    SCI cables are also out-of-stock. So, I'll be ordering more of those as well.

    My next steps are to redesign the flash boards to use the small pitch TSSOP package chips. And, to have the boards made and assembled by a 3rd party. Should make my workload easier. Hopefully, it will also bring the price down.
    https://db.tt/SV7ONZpQ
    Rob Lloyd
    '89 Daytona C/S

    2.5 T1 Auto
    13.24 @ 100.5mph
    NHRA #3728 AF/S

    boostbutton.com
    tuning wiki

  7. #47
    turbo addict Turbo Mopar Contributor
    Join Date
    Dec 2005
    Location
    Seattle
    Posts
    7,063

    Re: BoostButton - hold on computers and cables

    Ok
    Quote Originally Posted by ShelGame View Post
    I'm still not caught up. But, getting there. When did you expect (or want) to get it back?
    I want it when it's reasonable. Hoping I can find the ecus. I have to make sure it works too as I have one with at dead coil driver, etc etc. Not sure if I should get two made or stick with one for now.
    I am still getting to doing my aem fic wiring harness so I can practice with the device before you unlock the limiter.
    Brent GREAT DEPRESSION RACING 1992 Duster 3.0T The Junkyard - MS II, OEM 10:1 -[I] Old - 11.5@125 22psi $90 [U]Stock[/U] 3.0 Junk Motor - 1 bar MAP [/I] 1994 Spirit 3.0T - 11.5@120 20 psi - Daily :eyebrows: Holset He351 -FT600 - 393whp 457ft/lb @18psi 1994 Spirit 3.0T a670 - He341, stock fuel, BEGI. Wife's into kid's project. 1990 Lebaron Coupe 2.2 TI/II non IC, a413 1990 Spirit 3.0 E.S. 41TE -- 1993 Spirit 3.0 E.S. 41TE -- 1994 Duster 3.0 A543 1981 Starlet KP61 Potential driver -- 1981 Starlet KP61 Parts -- 1983 Starlet KP61 Drag 2005 Durango Hemi Limited -- 1998 Dodge 12v 47re. AFC mods, No plate, Mack plug, Boost elbow -- 2011 Dodge 6.7 G56

  8. #48
    turbo addict Turbo Mopar Contributor
    Join Date
    Dec 2005
    Location
    Seattle
    Posts
    7,063

    Re: BoostButton - hold on computers and cables

    Found my ecus. I have 7 spares but but most have issues. I would like to send in one that has an odd misfire at 2050 rpms thinking there is a corruption.
    Brent GREAT DEPRESSION RACING 1992 Duster 3.0T The Junkyard - MS II, OEM 10:1 -[I] Old - 11.5@125 22psi $90 [U]Stock[/U] 3.0 Junk Motor - 1 bar MAP [/I] 1994 Spirit 3.0T - 11.5@120 20 psi - Daily :eyebrows: Holset He351 -FT600 - 393whp 457ft/lb @18psi 1994 Spirit 3.0T a670 - He341, stock fuel, BEGI. Wife's into kid's project. 1990 Lebaron Coupe 2.2 TI/II non IC, a413 1990 Spirit 3.0 E.S. 41TE -- 1993 Spirit 3.0 E.S. 41TE -- 1994 Duster 3.0 A543 1981 Starlet KP61 Potential driver -- 1981 Starlet KP61 Parts -- 1983 Starlet KP61 Drag 2005 Durango Hemi Limited -- 1998 Dodge 12v 47re. AFC mods, No plate, Mack plug, Boost elbow -- 2011 Dodge 6.7 G56

Page 3 of 3 FirstFirst 123

Similar Threads

  1. BoostButton SCI Cables - Now Series 3!
    By ShelGame in forum General Vendor Area
    Replies: 0
    Last Post: 10-07-2013, 11:11 PM
  2. Replies: 7
    Last Post: 12-02-2011, 08:29 PM
  3. Replies: 19
    Last Post: 06-29-2009, 03:20 PM
  4. Transmission WTT: Shadow 523 shifter cables for Daytona 523 cables
    By chilort in forum Parts For Sale
    Replies: 6
    Last Post: 06-21-2009, 08:58 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •