SOLD!
Date: 25th February 2016
Username: moparzrule
Name: Matt
City, State, Zip: Carlisle, PA 17015
Contact: PM
Price: SOLD!
Description:
Selling a refurbished 2 piece intake. It was media blasted, ported for 52mm TB, flanges surfaced, all bolts cleaned, painted, and reassembled with a new gasket. The runners are untouched stock, which is rare because most of the time whenever I come across a 2 piece intake someone tried their hand at porting and botched something. There is also an 1/8'' NPT port (plugged off) right at the neck for whatever you may choose whether it be a temp sensor, alky injection, or 5th injector etc. It was painted with 2000 degree ceramic paint on the lower half, and 500 degree engine paint on the upper half since it has more gloss. The ''fins'' on the top I buffed the paint back off of them for the factory silver top look.
Now onto the rail. The inner rail was removed, both ends drilled for 1/4'' NPT, media blasted cleaned and polished. It has a 3/8'' feed on the one end, and capped off on the other. This setup is good for 400whp, and above that if you uncap the other side and add dual feed the sky is the limit. This is the exact way ''Shadow'' modified his rail and last I remember he was running 550+ whp.
This intake is assembled and ready to run, but I did take some pics of it before assembly for your viewing.
Price is $250 plus shipping.