Page 1 of 2 12 LastLast
Results 1 to 20 of 22

Thread: Pat's Garage Clean Out!

  1. #1
    turbo addict Pat's Avatar
    Join Date
    Dec 2005
    Location
    Rockville, MD
    Posts
    3,801

    Pat's Garage Clean Out!

    Date: 15th January 2016
    Username: Pat
    Full Name: Pat Culkin
    City, State, Zip:
    Contact: PM me
    Price: Varies. Items with shipping included is for continental US.


    Before I officially get labeled as a hoarder, it's time to clear out some stuff. Some parts came with cars, or were picked up in parts deals and stored. Other parts were from projects started that were never finished or changed direction mid way through. Can get pics for those interested, but please don't waste my time if you're not really interested. There will be much more posted as I go through the stash, so keep looking.

    Springs:

    - Two 2.25" diameter, 8" long, 400lb Hypercoil springs: $40 shipped
    - Set of CSX springs: $75 shipped
    - Shelby Z front springs: $35 shipped

    Turbos:
    - Turbonetics F1-57, .63 Chrysler turbine housing. This is just the exh housing. $100 shipped
    - Holset HE341. Compressor elbow cut off and rewelded on at angle, WG can bracket welded on for T3. Picked up last year, never used, went another route. $350 shipped
    - Mopar replacement VNT turbo. Have receipts. Was put on car, ran for about 12k, car then sat for years. Was resurrected about 5 years back and run on car till last year. Total mileage about 20k. Perfect shape. $350 shipped.
    - stock T3 turbo. Looks like fresh rebuild. Motor smoked badly (so I was told), but it was pissing oil long before the turbo. Exhaust ports and manifold were drenched in oil. Suspect turbo is fine. $125 shipped

    Electronics:
    - turbo power module: $50 shipped
    - '87 CSX logic module, stock: $75 shipped
    - '87 CSX MP stage 2 logic module: $85 shipped

    Gauges:


    Wheel/Axle
    -Rear Axle assembly out of Shelby Daytona. Powdercoated gloss black, never used since coated. Comes with new poly bushings. Looks great. $150 (must pick up)

    Engine:
    - tons of T2/T3 rods. $60 shipped for set of 4
    - T3 piston sets. Factory, forged T3 Mahles. Good shape. $100 shipped per set
    - 8v swirl heads. Various states of dirty. $75 shipped each
    - Rebuilt, never run T2 shortblock: '87 T1 block ('87 GLHS 361 motor), T2 forged crank turned .010/.010, ARP main studs, new rod, main and I shaft bearings, new front and rear main seals, new I shaft seals, resized T2 rods with ARP's, fresh hone with replacement Mahles (pistons have 20k on them), new rings. Has factory oil pump, opened pick up, and pan installed. Ready to run. $1000 picked up
    - Rebuilt, never run 2.5 hybrid short block. std/std, polished crank, ARP main studs, .020 JE pistons on T2 rods with ARP's, new rod, main and I shaft bearings, new rings, front and rear main seals, new I shaft seal, factory oil pump. Deck plugged, resurfaced and ready for 2.0/2.4 head. Pan installed. Comes with a plugged and drilled 2.4 cylinder head (but has not been gone through). $1200 picked up


    Misc:
    -Red T3 alum valley cover: $30 shipped
    - L body hood release and cable: $20 shipped
    - Permacool adjustable fan controller. Was on a car I bought, seemed to work, I removed it. $20 shipped
    - TBI fuel pump. Brand new, never used: $30 shipped
    - T3 airbox and snorkel. Snorkel bracket broken (like the rest of them), looks good. $75 shipped
    - T2 K&N drop in air filter: $20 shipped
    Last edited by Pat; 01-16-2016 at 07:48 PM.

  2. #2
    turbo addict Pat's Avatar
    Join Date
    Dec 2005
    Location
    Rockville, MD
    Posts
    3,801

    Re: Pat's Garage Clean Out!

    Sold List:
    -Monster Tach 50
    -Wheel studs 20
    -MP Autox Rear springs (G, P, etc. Not L body) $50 shipped
    -One common block/no balance shaft oil panand pick up: $60 shipped
    -One common block/no balance shaft oil panand pick up: $60 shipped
    -'90 VNT SBEC. Stock. Works fine. $150 shipped
    -Dawes Devices A/F gauge. $20 shipped
    Last edited by Pat; 01-16-2016 at 07:49 PM.

  3. #3
    Supporting Member Turbo Mopar Contributor 2.216VTurbo's Avatar
    Join Date
    Dec 2005
    Location
    SoCal the OC
    Posts
    6,675

    Re: Pat's Garage Clean Out!

    Dibs on VNT SBEC. PM me paypal please...

    AJ (no More Alan) 84 Rampage RT TIII/568 Quaife 87 GLHS dealer optioned Red 16V Masi/568/Quaife
    90 Masi 16V White/Ginger/Black
    89 TC Masi 16V Red/Ginger/Black
    86 GLHS #110 RoadRace Built 89 CSX-VNT Recaro Car
    89 Turbo Mini 'Woody' 85 GLHT 'RedBox'
    2014 Explorer DD'r 3.5Twin Turbo Ecoboost AWD and 500HP
    My profile page has over 20,000 views, I'm somebody LOL

  4. #4
    turbo addict Pat's Avatar
    Join Date
    Dec 2005
    Location
    Rockville, MD
    Posts
    3,801

    Re: Pat's Garage Clean Out!

    I should add: if anyone is looking for something specific, PM me. I have more stuff here than I'd care to admit. :-)

  5. #5
    Garrett booster
    Join Date
    Mar 2015
    Location
    Mexico City
    Posts
    73

    Re: Pat's Garage Clean Out!

    cen you send me pics of the t3 pistons and the snorkel please?

  6. #6
    turbo addict Pat's Avatar
    Join Date
    Dec 2005
    Location
    Rockville, MD
    Posts
    3,801

    Re: Pat's Garage Clean Out!

    Quote Originally Posted by LeYepez View Post
    cen you send me pics of the t3 pistons and the snorkel please?

    Here you go.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	image.jpeg 
Views:	187 
Size:	2.20 MB 
ID:	57182   Click image for larger version. 

Name:	image.jpeg 
Views:	126 
Size:	2.29 MB 
ID:	57183  

  7. #7
    Super Moderator Turbo Mopar Staff 135sohc's Avatar
    Join Date
    Aug 2008
    Location
    SoMd
    Posts
    6,178

    Re: Pat's Garage Clean Out!

    Wheel/Axle
    -Rear Axle assembly out of Shelby Daytona. Powdercoated gloss black, never used since coated. Comes with new poly bushings. Looks great. $150 (must pick up)
    Does it have the hanger brackets that bolt to the car bottom ? and if not do you know the bushing style 'wide vs narrow'

    Thanks
    1994 Shadow Sedan. 2.2 N/A, A568 400,000 miles. "the science experiment"
    1987 Shelby CSX #418. Long term rebuild and restore ?

  8. #8
    turbo addict Pat's Avatar
    Join Date
    Dec 2005
    Location
    Rockville, MD
    Posts
    3,801

    Re: Pat's Garage Clean Out!

    Quote Originally Posted by 135sohc View Post
    Does it have the hanger brackets that bolt to the car bottom ? and if not do you know the bushing style 'wide vs narrow'

    Thanks
    It does not have the hanger brackets. I'll check the bushing style tomorrow for you.

  9. #9
    turbo addict Pat's Avatar
    Join Date
    Dec 2005
    Location
    Rockville, MD
    Posts
    3,801

    Re: Pat's Garage Clean Out!

    Quote Originally Posted by 135sohc View Post
    Does it have the hanger brackets that bolt to the car bottom ? and if not do you know the bushing style 'wide vs narrow'

    Thanks
    Later style/wide bushing style.

  10. #10
    turbo addict Pat's Avatar
    Join Date
    Dec 2005
    Location
    Rockville, MD
    Posts
    3,801

    Re: Pat's Garage Clean Out!

    Just an update for those who purchased parts: I wasn't able to ship yesterday due to something work related. All parts are loaded in the truck and will be boxed and dropped for shipping today. My apologies for the delay.

    Pat

  11. #11
    boostaholic
    Join Date
    Jan 2008
    Location
    Penn Hills PA
    Posts
    1,331

    Re: Pat's Garage Clean Out!

    Got the Tach today!Thanks pat!

  12. #12
    turbo addict Pat's Avatar
    Join Date
    Dec 2005
    Location
    Rockville, MD
    Posts
    3,801

    Re: Pat's Garage Clean Out!

    Great! Everything went out last week per my last update, but I'm guessing the snow storm slowed things down a bit.

  13. #13
    boostaholic
    Join Date
    Jan 2008
    Location
    Penn Hills PA
    Posts
    1,331

    Re: Pat's Garage Clean Out!

    Tach works great pat!Thank you!

  14. #14
    Hybrid booster
    Join Date
    Sep 2011
    Location
    Maryland
    Posts
    345

    Re: Pat's Garage Clean Out!

    Heads still available?

  15. #15
    Garrett booster
    Join Date
    Mar 2015
    Location
    Mexico City
    Posts
    73

    Re: Pat's Garage Clean Out!

    can you send some pics of the T3 valley cover???
    ventaschryslerdodge@hotmail.com

    thanks

  16. #16
    turbo addict Pat's Avatar
    Join Date
    Dec 2005
    Location
    Rockville, MD
    Posts
    3,801

    Re: Pat's Garage Clean Out!

    Quote Originally Posted by krut View Post
    Heads still available?
    Quote Originally Posted by LeYepez View Post
    can you send some pics of the T3 valley cover???
    ventaschryslerdodge@hotmail.com

    thanks
    Yes, still have a few heads.

    Will get a pic of valley cover but it may take a bit. I've been overwhelmed with work lately. I'll get out to the garage asap.

  17. #17
    The moderately moderate moderator Turbo Mopar Staff
    Join Date
    Dec 2006
    Location
    Akron, Ohio
    Posts
    6,870

    Re: Pat's Garage Clean Out!

    Pat, do you have G,J,P front spindles? Specifically 89-90?
    Bryan
    86 GLHS #161, 2016 Impala
    SDAC National Member, SDAC Buckeye Chapter Member

    A man has got to know his limitations.....

  18. #18
    turbo addict Pat's Avatar
    Join Date
    Dec 2005
    Location
    Rockville, MD
    Posts
    3,801

    Re: Pat's Garage Clean Out!

    Quote Originally Posted by black86glhs View Post
    Pat, do you have G,J,P front spindles? Specifically 89-90?
    Don't think so. Sorry.

  19. #19
    Hybrid booster
    Join Date
    Jul 2010
    Location
    California
    Posts
    909

    Re: Pat's Garage Clean Out!

    what do the cylinder heads look like?
    1985 Dodge Shelby Charger *never ending project* 1987 Dodge Daytona Shelby Z *SOLD* 1989 Chrysler Lebaron 2.5 Turbo Convertible *CRUSHED* 2001 Dodge Stratus R/T *SOLD* 2006 Honda Accord Sedan EX-L

  20. #20
    turbo addict Pat's Avatar
    Join Date
    Dec 2005
    Location
    Rockville, MD
    Posts
    3,801

    Re: Pat's Garage Clean Out!

    I'm sorry to do this, but I'm going to pull everything off the market for the time being. Couple things going on at work that have me absolutely swamped and will continue to do so for the near future. That being the case, I'm not getting back to people as fast as I need to.

    Everything that has been purchased has been shipped already, so all good there, but don't want to risk not being timely with responses or shipping in the future. When things settle down, I'll repost.

    Thanks,
    Pat

Page 1 of 2 12 LastLast

Similar Threads

  1. General Garage Clean-Out: 8v and 2.0/2.4 Parts
    By Austrian Dodge in forum Parts For Sale
    Replies: 2
    Last Post: 10-13-2010, 05:00 PM
  2. General Garage clean out sale
    By quantum in forum Parts For Sale
    Replies: 20
    Last Post: 10-25-2009, 04:31 PM
  3. General HUGE garage clean out
    By jaysshelby in forum Parts For Sale
    Replies: 27
    Last Post: 04-04-2008, 11:54 PM
  4. Garage Clean Up
    By Mario in forum Parts For Sale
    Replies: 26
    Last Post: 04-18-2007, 11:11 AM
  5. Garage Clean up
    By banger68 in forum Parts For Sale
    Replies: 0
    Last Post: 10-06-2006, 10:29 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •