1988 Daytona Shelby Z being parted out 2-weeks only

[mopar-tech]

Date: 07th January 2016
Username: mopar-tech
Gary Donovan
Oakdale CT 06370
garydonovan@hotmail.com

Parting out Daytona Shelby Z purchased from original owner.

Car is from NH with 180k on the clock and everything from the drivers floor back is crunchy-crispy. Car was well maintained and serviced but rust has taken its toll. The car is intact and in the interior in good condition aside from seat wear on drivers seat.

Pulling the drivetrain this weekend and several pieces will be used on the boys CSX like the axles, front seats, dash temp control, alternator, etc.

Car will be here till at least the spring in case we need any more parts and pieces for the boys car.

Gary

[going4speed]

I'd love to have the cyl head if it looks decent and the shifter.

[mopar-tech]

I'd love to have the cyl head if it looks decent and the shifter.

Shifter being used on boys CSX, might have a few heads about. What casting number you looking for?

[going4speed]

782 cross drilled

[kotakee]

PM sent

[c2xejk]

How much for the door panels shipped to 46039?

[mopar-tech]

PM sent

No PM received

- - - Updated - - -

How much for the door panels shipped to 46039?

Double oversize package is going to be expensive, at least $75

Still interested?

[Rebel01]

Hello!

Are the ground effects including door panels, and the chin spoiler available

I think greyhound would ship these to Michigan... ... I can inquire about this and how to box it up.

Let me know!

Happy New Year!

Thanks,
Paul

P.S. - too bad about the body! I hate seeing rust get the good ones.

[Jason89]

Do you still have the inside door handle bezels and the spare tire cover?
Thanks.

[mopar-tech]

Do you still have the inside door handle bezels and the spare tire cover?
Thanks.

Spare tire cover? The "cardboard" piece or the carpet?

The driveway of death claims another victim.

Just a notice- For the moment the car has a stay with its date with the crusher. We pulled the engine and trans since we need some of the parts for the boys CSX and pushed it out back. I don't want to get rid of the car till the CSX is on the road which will be several weeks or months as we might need a bunch of odds and ends. So till then the car isn't going anywhere.

Gary

[ATaylorRacing]

How about the drivers seat mount....not the seat itself, I have that, just the mount to 46902?

[fields13]

Looking for a k-member, but not sure what shipping would be to 47203...not sure how much they weigh.

Mine had the sway bar mount break away from the k-member (previous owner repair). I re-welded it, but would prefer an undamaged unit.

[mopar-tech]

Looking for a k-member, but not sure what shipping would be to 47203...not sure how much they weigh.

Mine had the sway bar mount break away from the k-member (previous owner repair). I re-welded it, but would prefer an undamaged unit.

I doubt you want this one, two of the sway bar bolts snapped off in the k-member.

[Jason89]

The "cardboard" Thanks

[lsm71]

Is the rear cargo cover available? If so how much shipped to 46321? Thanks

[silverWS6]

If you still have the car, is the shifter gear diagram available? Thanks

[karlak]

I missed this.

[mopar-tech]

The "cardboard" Thanks

Cardboard is shot, sorry.

Car is still here and is going to be about till at least the boys CSX is on the road in case we need to odd nut and bolt.

Gary

[turboshadow]

Is the T2 radiator any good?

[mopar-tech]

Is the T2 radiator any good?

Yes but someone interested.