Page 1 of 2 12 LastLast
Results 1 to 20 of 36

Thread: parting out 90 Daytona + upgrades!

  1. #1
    turbo addict
    Join Date
    Dec 2011
    Location
    Hemet,CA
    Posts
    1,636

    lotsa stuff! A568, ZF, 4puck, rods, Mahles, +40s, SBEC, AFPR, more!!!

    Pictures available upon request!

    A568 transmission!!, small spline. Works great. $500 + ACTUAL shipping costs!! See pics below! See special deal note!!
    ***SPECIAL DEAL*** Anyone who buys the A568 tranny at the above price gets 1 free item below with a price up to $50!


    forged rods, set of 4, (2.5 T1) p/n 4323958 $85

    Stock 2.5 T1 roller cam $40

    new HEP, borg warner p/n ME55 (works on 2.5 T1). AFAIK this is the same one Chrysler sells. New in Box. $20

    ZF pump w/ bracket. Have not tested it but have no reason to believe it has problems. $60

    G-head: Cleaned and surfaced but not pressure tested. Comes with valves, springs and retainers. $75 + ACTUAL shipping cost

    Massive G-Body Intercooler setup w/piping! Equivalent to 4 stock cores, bar and plate, fins inside and out, no epoxy. Same side in/out. 2.5" piping through front bulkhead. Requires use of lawnmower battery to fit pipes, I will include a custom lawnmower battery bracket, but you will probably need to modify stock wiring setup so things fit nicely. I'll include all couplers as well. Piping is custom cut bends TIG welded together with beads formed into ends for couplers. Detailed pics available of course. This is a great intercooler setup for the G-body and could save you alot of time and money. $200 + actual shipping.

    Stock 2.5/T2 injectors p/n 5277865, set of 4, work great, passed California SMOG only a few thousand miles ago $45
    1 piece fuel rail, no dampener, great condition. Includes little bracket that pinches lines together and bolts to head. Includes regulator line as well. *note* you will need a new crush oring for the regulator. $30
    4 injector clips, mount injectors to rail $10 shipped
    Stock rod bushing for T2/2.5L rods stock wrist pin size *must be honed* *Chrysler brand* $10 shipped
    O2 sensor, 4 wire, BOSCH, replaced only a few thousand miles ago, passed smog. $20 shipped
    G-body ball joints NIB! Set of 2, Gp Sorenson brand $25
    Tachometer Remote mount w/pickup, like new condition, equus brand, 8krpm, $25, perfect for modified vehicles with no tach!
    2.5" swingvalve. I believe this is the biggest you can get before going 3". Has a bit of grinding done to the outer surface to fit a header. Pics avail. $70
    Intermediate shaft (axle) w/bracket Seemed to be working smoothly! $40
    Intermediate shaft (engine) From a 2.5 T1 common block. About 35k on since it was re-ground. $40
    Distributor From a 2.5 T1 common block. I believe its original chrysler. Includes cheap wires,cap, and rotor, which are all usable still. No hep. (sold separately above) $30
    Factory service manual! 1990! Includes 4 books: "Wiring Diagrams", "Electrical, Fuel & Emissions", "Engine, Chassis, and Body", and "Service manual supplement Wiring Diagrams for G/J body". The engine book is heavily worn and greasy because of all the usage, but its still perfectly functional with no missing pages. The other books are somewhat greasy and worn. $40
    Powertrain diagnostic procedures 1990. Meant to be used with a DRB2. $15
    Haynes Chrysler 82 to 95 FWD service manual Filthy, water stained, but not falling apart and totally readable. Good backup manual to have in the car at all times or what not. Plus if you are learning, its a good 2nd opinion on how to do things. $10
    Chilton 81 to 95 4wd 4cyl Chrysler repair manual Much better condition than the haynes. $10

    I am also parting out a 1990 Daytona 2.5 ES turbo. So if you have specific parts request just ask!

    Shipping to Canada is available, just ask!

    SOLD ITEMS:

    $SOLD!!+2mm exhaust valves for G head. New, still in box. P/N 4876670 $SOLD!!
    $SOLD!!+2mm exhaust valve seats, New, still in bags. P/N 4349126 $SOLD!!
    $SOLD!! 3 bar map sensor, works great! $SOLD!!
    $SOLD!! +40 injectors, set of 4, tested good at witch-hunter a few thousand miles ago.$SOLD!!
    $SOLD!! 1990 Daytona ES 2.5 T1 airbox (yes the weird rectangular one) includes accordion tube and great condition oval to turbo rubber tube $SOLD!!
    $SOLD!! Wideband,Innovate LC1. Includes sensor, module, and gauge.$SOLD!!
    $SOLD!! Greddy Type RS BOV with adapter to 2.5" piping/couplers $SOLD!!
    $SOLD!! 3" downpipe, same one you get from FWDP/TU $SOLD!!
    $SOLD!! w/ chrysler cable and cartridge for TD's $75 If interested PM and I will find out exact cartridge it has.$SOLD!!
    $SOLD!! Set of THREE Stock Cast Mahle 0.030 over 2.5 T1 pistons $SOLD!!
    $SOLD!! Copper head gasket shim, definitely used, but still good
    $SOLD!!G-body Turbo air scoop[/B], this is the metal + rubber scoop that mounts to the K-frame and directs air up to the turbo, includes bolts $SOLD!!
    $SOLD!!4 puck clutch w/ yellow PP + stock TO bearing! $SOLD!!
    $SOLD!!AFPR. The black one by Accufab. Used but works great. $SOLD!!
    $SOLD!!POLY MOUNTS Set of all 4 for 90 daytona. $SOLD!!
    $SOLD!!3" exhaust system w/muffler. $SOLD!!
    $SOLD!!Walbro 255 in-tank pump 35k miles on it, works great! $SOLD!!
    $SOLD!!Mopar performance book for 2.2/2.5![/B] 4th edition. P/N P5007162 $SOLD!!





    Last edited by acannell; 10-21-2015 at 10:30 PM.

  2. #2
    turbo addict
    Join Date
    Dec 2005
    Location
    Spokane, Wa
    Posts
    9,046

    Re: parting out 90 Daytona + upgrades!

    Asa, is everything ok? Haven't seen you post in a couple weeks and now you're dumping all these parts?? Bailing on us??

  3. #3
    turbo addict
    Join Date
    Dec 2011
    Location
    Hemet,CA
    Posts
    1,636

    Re: parting out 90 Daytona + upgrades!

    I'm still around, I have tons of stuff to sell!

    I just added more stuff to the list, I keep forgetting all the stuff I have, so make sure to check out the list and ask if you need something that I haven't listed. I'm parting out a 90 Daytona, and I have all the usual 300hp / 3bar stuff that goes with TD's.

  4. #4
    turbo addict
    Join Date
    Dec 2011
    Location
    Hemet,CA
    Posts
    1,636

    Re: parting out 90 Daytona + upgrades!

    Added stuff! Including poly mounts!

  5. #5
    turbo addict
    Join Date
    Dec 2011
    Location
    Hemet,CA
    Posts
    1,636

    Re: parting out 90 Daytona + upgrades!

    Added 3" exhaust system!

  6. #6
    Supporting Member Turbo Mopar Contributor
    Join Date
    Feb 2015
    Location
    toronto
    Posts
    1,766

    Re: parting out 90 Daytona + upgrades!

    PM sent yesterday

  7. #7
    turbo addict
    Join Date
    Dec 2011
    Location
    Hemet,CA
    Posts
    1,636

    Re: parting out 90 Daytona + upgrades!

    Quote Originally Posted by chromguy View Post
    PM sent yesterday
    sorry thought I pm'd you back..the +40 injectors are almost certainly sold

  8. #8
    turbo addict
    Join Date
    Dec 2011
    Location
    Hemet,CA
    Posts
    1,636

    Re: parting out 90 Daytona + upgrades!

    updated sold items

  9. #9
    Garrett booster
    Join Date
    Jun 2010
    Location
    indianola
    Posts
    64

    Re: lotsa stuff! A568, ZF, 4puck, rods, Mahles, +40s, SBEC, AFPR, more!!!

    Do you have the door mechanism that latches when you shut the door?

  10. #10
    turbo addict
    Join Date
    Dec 2011
    Location
    Hemet,CA
    Posts
    1,636

    Re: lotsa stuff! A568, ZF, 4puck, rods, Mahles, +40s, SBEC, AFPR, more!!!

    Quote Originally Posted by boostedbaron89 View Post
    Do you have the door mechanism that latches when you shut the door?
    I should, the car isnt missing anything except what I've sold so far. Do you mean the mechanism in the door that grabs the hook? Do you want just one? Passenger or driver? (in case they are different). I think I'd like to sell stuff like that last so the doors stay closed though

  11. #11
    Supporting Member Turbo Mopar Contributor zin's Avatar
    Join Date
    May 2006
    Location
    ca
    Posts
    4,479

    Re: parting out 90 Daytona + upgrades!

    How are the front seats on the Shadow ES?

    Mike
    "The Constitution is not an instrument for the government to restrain the people, it is an instrument for the people to restrain the government - lest it come to dominate our lives and interests." - Patrick Henry

    Bad laws are the worst sort of tyranny.
    - Edmund Burke

  12. #12
    turbo addict
    Join Date
    Dec 2011
    Location
    Hemet,CA
    Posts
    1,636

    Re: parting out 90 Daytona + upgrades!

    Quote Originally Posted by zin View Post
    How are the front seats on the Shadow ES?

    Mike
    me? u mean daytona es? they are actually quite good. drivers has a small tear maybe size of a dime on headrest corner..but they are both comfy and still look pretty good..if I saw them in a junkyard and I was replacing thrashed or torn up seats I'd grab them in a second.

  13. #13
    Garrett booster
    Join Date
    Jun 2010
    Location
    indianola
    Posts
    64

    Re: lotsa stuff! A568, ZF, 4puck, rods, Mahles, +40s, SBEC, AFPR, more!!!

    Yes that is what o mean and I would like both side of possible . I understand about keeping the door shut but if you would save those for me when you are done parting it out I would greatly appreciate it!

  14. #14
    Garrett booster
    Join Date
    Jun 2010
    Location
    indianola
    Posts
    64

    Re: lotsa stuff! A568, ZF, 4puck, rods, Mahles, +40s, SBEC, AFPR, more!!!

    What kind of condition are the rubber window trim on the passenger and driver side door?

  15. #15
    turbo addict
    Join Date
    Dec 2011
    Location
    Hemet,CA
    Posts
    1,636

    Re: lotsa stuff! A568, ZF, 4puck, rods, Mahles, +40s, SBEC, AFPR, more!!!

    Quote Originally Posted by boostedbaron89 View Post
    Yes that is what o mean and I would like both side of possible . I understand about keeping the door shut but if you would save those for me when you are done parting it out I would greatly appreciate it!

    will do, ill check on the weatherstripping..same deal though i need to keep the car sealed until the very end

  16. #16
    turbo addict
    Join Date
    Dec 2011
    Location
    Hemet,CA
    Posts
    1,636

    Re: parting out 90 Daytona + upgrades!

    added intercooler and updated sold items!

  17. #17
    turbo addict
    Join Date
    Dec 2011
    Location
    Hemet,CA
    Posts
    1,636

    Re: parting out 90 Daytona + upgrades!

    added a bunch of stuff!

  18. #18
    Hybrid booster
    Join Date
    Jul 2006
    Location
    Gilbertsville, PA
    Posts
    529

    Re: lotsa stuff! A568, ZF, 4puck, rods, Mahles, +40s, SBEC, AFPR, more!!!

    Pictures / specs on the tach?

  19. #19
    turbo addict
    Join Date
    Dec 2011
    Location
    Hemet,CA
    Posts
    1,636

    Re: lotsa stuff! A568, ZF, 4puck, rods, Mahles, +40s, SBEC, AFPR, more!!!

    Quote Originally Posted by DaveSkrab View Post
    Pictures / specs on the tach?
    okay I was wrong its an Equus, 8000rpm..comes with pickup, has the bracket and instructions...looks ready to go

    total shipped to you would be $30


  20. #20
    Supporting Member Turbo Mopar Contributor zin's Avatar
    Join Date
    May 2006
    Location
    ca
    Posts
    4,479

    Re: parting out 90 Daytona + upgrades!

    Sorry, I am looking for a replacement for the driver's side on my spirit r/t, I don't think they are the same. ..

    Mike
    "The Constitution is not an instrument for the government to restrain the people, it is an instrument for the people to restrain the government - lest it come to dominate our lives and interests." - Patrick Henry

    Bad laws are the worst sort of tyranny.
    - Edmund Burke

Page 1 of 2 12 LastLast

Similar Threads

  1. General Parting out 87 Daytona
    By jrbexhaust in forum Parts For Sale
    Replies: 24
    Last Post: 06-09-2015, 11:08 PM
  2. General Parting out 86 Daytona CS
    By GunPilot in forum Parts For Sale
    Replies: 16
    Last Post: 04-29-2012, 05:37 PM
  3. General Parting out 89 Daytona CS
    By Alan Warman in forum Parts For Sale
    Replies: 10
    Last Post: 11-01-2009, 08:23 PM
  4. TII daytona wont start after upgrades.
    By Mopar318 in forum "I need help!"
    Replies: 27
    Last Post: 08-05-2009, 04:38 PM
  5. General Parting out 92 Daytona ES V6
    By jonnyb in forum Parts For Sale
    Replies: 12
    Last Post: 07-14-2008, 11:10 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •