DP sent. Will have the plate to you as soon as I can get it off. Thanks!
DP sent. Will have the plate to you as soon as I can get it off. Thanks!
Ok guys i just sent out pms regarding deposits, so if your on the list and didnt get a pm let me know.
Thanks Adam
Deposit sent!
Adam,
$200 (gifted) deposit sent
steve
Looked at the parts I planned on sending and one of the bushings is damaged
Brent GREAT DEPRESSION RACING 1992 Duster 3.0T The Junkyard - MS II, OEM 10:1 -[I] Old - 11.5@125 22psi $90 [U]Stock[/U] 3.0 Junk Motor - 1 bar MAP [/I] 1994 Spirit 3.0T - 11.5@120 20 psi - Daily :eyebrows: Holset He351 -FT600 - 393whp 457ft/lb @18psi 1994 Spirit 3.0T a670 - He341, stock fuel, BEGI. Wife's into kid's project. 1990 Lebaron Coupe 2.2 TI/II non IC, a413 1990 Spirit 3.0 E.S. 41TE -- 1993 Spirit 3.0 E.S. 41TE -- 1994 Duster 3.0 A543 1981 Starlet KP61 Potential driver -- 1981 Starlet KP61 Parts -- 1983 Starlet KP61 Drag 2005 Durango Hemi Limited -- 1998 Dodge 12v 47re. AFC mods, No plate, Mack plug, Boost elbow -- 2011 Dodge 6.7 G56
Deposit sent!
I havent recived a pm yet.
did u get my pm?
Adam, sorry I spaced this out but if it's not too late, put me on that list please.
Turbo Joe
----------------------- 87 CSX #175 TIII powered, MegaSquirt3 Pro Ultimate, GTX3076R, Turbo Joe header, Lengel intake, Menegon ported head, the list goes on
Stock is ordered and on its way. Should arrive 1/6/16
On the stock plate, do we need to remove the bearing race and oil trough?
Some metal showed up yesterday!
A few people on the list have not sent the plates to me yet. I have marked behind your name on the list in the first post if I received your plate. I will need all the plates no later then 2/5/16. I will be setting up the cnc that weekend to modify the stock thin steel plate. If I don't have your plates by that date, I have set the cnc again and you will be charged a $20 set up fee.
The excuse list is getting short enough I suppose its time to buy the quaife for when this work of art shows up in the mail.
1994 Shadow Sedan. 2.2 N/A, A568 400,000 miles. "the science experiment"
1987 Shelby CSX #418. Long term rebuild and restore ?
JT
SDAC Director
SDAC-Chicago President
JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
87 Shelby Z - 10.50@141.66mph
87 CSX #751 Clone - 12.88@102.88mph
www.badassperformance.com
Check out Turbo-Mopar Times!
Submit your 1/4 mile times HERE!!
Support SDAC! Join Today!
"I'm not some pro athlete with a bajillion dollars, I'm just an every man"
Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.