A568 & 523 CNC machined 4140 bearing support plates

[cjbintx]

DP sent. Will have the plate to you as soon as I can get it off. Thanks!

[lengel]

Ok guys i just sent out pms regarding deposits, so if your on the list and didnt get a pm let me know.

Thanks Adam

[c2xejk]

Deposit sent!

[chargerturbo87]

Adam,
$200 (gifted) deposit sent
steve

[Ondonti]

Looked at the parts I planned on sending and one of the bushings is damaged

[rx2mazda]

Deposit sent!

[cheezit53]

I havent recived a pm yet.

[lengel]

I havent recived a pm yet.

I sent you a pm over on TD since you contacted me on that forum. You got the same pm on TD that everybody else got. If you look on the list in the first post it will show that you paid your deposit behind your name.

Adam

- - - Updated - - -

[Spiritman]

did u get my pm?

[Turbo Joe]

Adam, sorry I spaced this out but if it's not too late, put me on that list please.

[cheezit53]

I sent you a pm over on TD since you contacted me on that forum. You got the same pm on TD that everybody else got. If you look on the list in the first post it will show that you paid your deposit behind your name.

Adam

- - - Updated - - -

Gotcha. The one from last week.

[lengel]

Stock is ordered and on its way. Should arrive 1/6/16

[c2xejk]

On the stock plate, do we need to remove the bearing race and oil trough?

[lengel]

On the stock plate, do we need to remove the bearing race and oil trough?

No need to remove the race. Remove and keep the oil feeder. Oil feeder taps out very easy with a hammer, and will make shipping easier.

Adam

[lengel]

Some metal showed up yesterday!

[lengel]

A few people on the list have not sent the plates to me yet. I have marked behind your name on the list in the first post if I received your plate. I will need all the plates no later then 2/5/16. I will be setting up the cnc that weekend to modify the stock thin steel plate. If I don't have your plates by that date, I have set the cnc again and you will be charged a $20 set up fee.

[135sohc]

The excuse list is getting short enough I suppose its time to buy the quaife for when this work of art shows up in the mail.

[rx2mazda]

A few people on the list have not sent the plates to me yet. I have marked behind your name on the list in the first post if I received your plate. I will need all the plates no later then 2/5/16. I will be setting up the cnc that weekend to modify the stock thin steel plate. If I don't have your plates by that date, I have set the cnc again and you will be charged a $20 set up fee.

Can I just send you my whole transmission and you rebuild it with the plate? Win - win.

[Turbo Joe]

Can I just send you my whole transmission and you rebuild it with the plate? Win - win.

why didn't I think of that

[BadAssPerformance]

Some metal showed up yesterday!

Glad the steel finally made it there! Those look nicer than the first ones used for Prototypes! LOL!